Quoting Sandeep Panda (2018-07-16 01:43:30) > Document the bindings used for the sn65dsi86 DSI to eDP bridge. > > Changes in v1: > - Rephrase the dt-binding descriptions to be more inline with existing > bindings (Andrzej Hajda). > - Add missing dt-binding that are parsed by corresponding driver > (Andrzej Hajda). > > Changes in v2: > - Remove edp panel specific dt-binding entries. Only keep bridge > specific entries (Sean Paul). > - Remove custom-modes dt entry since its usage is removed from driver also (Sean Paul). > - Remove is-pluggable dt entry since this will not be needed anymore (Sean Paul). > > Changes in v3: > - Remove irq-gpio dt entry and instead populate is an interrupt > property (Rob Herring). > > Changes in v4: > - Add link to bridge chip datasheet (Stephen Boyd) > - Add vpll and vcc regulator supply bindings (Stephen Boyd) > - Add ref clk optional dt binding (Stephen Boyd) > - Add gpio-controller optional dt binding (Stephen Boyd) > > Changes in v5: > - Use clock property to specify the input refclk (Stephen Boyd). > - Update gpio cell and pwm cell numbers (Stephen Boyd). > > Changes in v6: > - Add property to mention the lane mapping scheme and polarity inversion > (Stephen Boyd). > > Changes in v7: > - Detail description of lane mapping scheme dt property (Andrzej > Hajda/ Rob Herring). > - Removed HDP gpio binding, since the bridge uses IRQ signal to > determine HPD, and IRQ property is already documented in binding. > > Changes in v8: > - Removed unnecessary explanation of lane mapping and polarity dt > property, since these are already explained in media/video-interface > dt binidng (Rob Herring). > > Changes in v9: > - Avoid putting re-definition of lane mapping and polarity dt binding > (Rob Herring). > > Changes in v10: > - Use interrupts-extended property instead of interrupts to specify > interrupt line (Andrzej Hajda). > - Move data-lanes and lane-polarity property example to proper place (Andrzej Hajda). > > Changes in v11: > - Add a property for suspend gpio function of GPIO1 pin on bridge chip > (Stephen Boyd). > > Changes in v12: > - Remove binding for dedicated DDC line (Andrzej Hajda). > > Signed-off-by: Sandeep Panda <spanda@xxxxxxxxxxxxxx> > --- Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
