From: Timur Tabi <timur@xxxxxxxxxxxxxx>
Add support for probing on ACPI systems, with ACPI HID QCOM8160.
On ACPI systems, clocks are always enabled, the PRNG should
already be enabled, and the register region is read-only.
The driver only verifies that the hardware is already
enabled never tries to disable or configure it.
Signed-off-by: Timur Tabi <timur@xxxxxxxxxxxxxx>
Tested-by: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
[port to crypto API]
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
drivers/crypto/qcom-rng.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/crypto/qcom-rng.c b/drivers/crypto/qcom-rng.c
index 80544326e310..e54249ccc009 100644
--- a/drivers/crypto/qcom-rng.c
+++ b/drivers/crypto/qcom-rng.c
@@ -4,6 +4,7 @@
// Based on msm-rng.c and downstream driver
#include <crypto/internal/rng.h>
+#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/crypto.h>
#include <linux/module.h>
@@ -168,9 +169,13 @@ static int qcom_rng_probe(struct platform_device *pdev)
if (IS_ERR(rng->base))
return PTR_ERR(rng->base);
- rng->clk = devm_clk_get(&pdev->dev, "core");
- if (IS_ERR(rng->clk))
- return PTR_ERR(rng->clk);
+ /* ACPI systems have clk already on, so skip clk_get */
+ if (!has_acpi_companion(&pdev->dev)) {
+ rng->clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(rng->clk))
+ return PTR_ERR(rng->clk);
+ }
+
rng->skip_init = (unsigned long)device_get_match_data(&pdev->dev);
@@ -193,6 +198,14 @@ static int qcom_rng_remove(struct platform_device *pdev)
return 0;
}
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id qcom_rng_acpi_match[] = {
+ { .id = "QCOM8160", .driver_data = 1 },
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, qcom_rng_acpi_match);
+#endif
+
static const struct of_device_id qcom_rng_of_match[] = {
{ .compatible = "qcom,prng", .data = (void *)0},
{ .compatible = "qcom,prng-ee", .data = (void *)1},
@@ -206,6 +219,7 @@ static struct platform_driver qcom_rng_driver = {
.driver = {
.name = KBUILD_MODNAME,
.of_match_table = of_match_ptr(qcom_rng_of_match),
+ .acpi_match_table = ACPI_PTR(qcom_rng_acpi_match),
}
};
module_platform_driver(qcom_rng_driver);
--
2.14.4
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
