To turn on the gpu_gx_gdsc, there is a hardware requirement to
turn on the root clock (GFX3D RCG) first which would be the turn
on signal for the gdsc along with the SW_COLLAPSE. As per the
current implementation of clk_rcg2_shared_ops, it clears the
root_enable bit in the enable() clock op. But due to the above
said requirement for GFX3D shared RCG, root_enable bit would be
already set by gdsc driver and clk_rcg2_shared_enable()should
not clear the root unless the disable is called.
Add support for the same by reusing the existing clk_rcg2_shared_ops
and deriving "clk_rcg2_gfx3d_ops" clk_ops for GFX3D clock to take
care of the root set/clear requirement.
Signed-off-by: Amit Nischal <anischal@xxxxxxxxxxxxxx>
---
drivers/clk/qcom/clk-rcg.h | 1 +
drivers/clk/qcom/clk-rcg2.c | 87 +++++++++++++++++++++++++++++++++++++++++++--
2 files changed, 86 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h
index b209a2f..c8c9558 100644
--- a/drivers/clk/qcom/clk-rcg.h
+++ b/drivers/clk/qcom/clk-rcg.h
@@ -160,5 +160,6 @@ struct clk_rcg2 {
extern const struct clk_ops clk_pixel_ops;
extern const struct clk_ops clk_gfx3d_ops;
extern const struct clk_ops clk_rcg2_shared_ops;
+extern const struct clk_ops clk_rcg2_gfx3d_ops;
#endif
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index 52208d4..667edd9 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -866,7 +866,7 @@ static int clk_rcg2_shared_set_rate_and_parent(struct clk_hw *hw,
return clk_rcg2_shared_set_rate(hw, rate, parent_rate);
}
-static int clk_rcg2_shared_enable(struct clk_hw *hw)
+static int __clk_rcg2_shared_enable(struct clk_hw *hw)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
int ret;
@@ -879,7 +879,14 @@ static int clk_rcg2_shared_enable(struct clk_hw *hw)
if (ret)
return ret;
- ret = update_config(rcg);
+ return update_config(rcg);
+}
+
+static int clk_rcg2_shared_enable(struct clk_hw *hw)
+{
+ int ret;
+
+ ret = __clk_rcg2_shared_enable(hw);
if (ret)
return ret;
@@ -929,3 +936,79 @@ static void clk_rcg2_shared_disable(struct clk_hw *hw)
.set_rate_and_parent = clk_rcg2_shared_set_rate_and_parent,
};
EXPORT_SYMBOL_GPL(clk_rcg2_shared_ops);
+
+static int clk_rcg2_gfx3d_enable(struct clk_hw *hw)
+{
+ return __clk_rcg2_shared_enable(hw);
+}
+
+static int clk_rcg2_gfx3d_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct clk_rate_request parent_req = { };
+ struct clk_hw *p;
+ unsigned long rate = req->rate;
+ int ret;
+
+ if (rate < req->min_rate || rate > req->max_rate)
+ return -EINVAL;
+
+ /* Get fixed parent - GPU_CC_PLL0_OUT_EVEN */
+ p = clk_hw_get_parent_by_index(hw, 1);
+
+ /* Parent should always run at twice of the requested rate */
+ parent_req.rate = 2 * req->rate;
+
+ ret = __clk_determine_rate(req->best_parent_hw, &parent_req);
+ if (ret)
+ return ret;
+
+ req->best_parent_hw = p;
+ req->best_parent_rate = parent_req.rate;
+ req->rate = parent_req.rate / 2;
+
+ return 0;
+}
+
+static int clk_rcg2_gfx3d_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+ int ret;
+ u32 cfg;
+
+ /* Configure fixed SRC and DIV */
+ cfg = rcg->parent_map[1].cfg << CFG_SRC_SEL_SHIFT;
+ cfg |= 0x3 << CFG_SRC_DIV_SHIFT;
+
+ ret = regmap_write(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, cfg);
+ if (ret)
+ return ret;
+
+ /*
+ * In case clock is disabled, update the SRC and DIV only
+ * and return without configuration update.
+ */
+ if (!__clk_is_enabled(hw->clk))
+ return 0;
+
+ return update_config(rcg);
+}
+
+static int clk_rcg2_gfx3d_set_rate_and_parent(struct clk_hw *hw,
+ unsigned long rate, unsigned long parent_rate, u8 index)
+{
+ return clk_rcg2_gfx3d_set_rate(hw, rate, parent_rate);
+}
+
+const struct clk_ops clk_rcg2_gfx3d_ops = {
+ .enable = clk_rcg2_gfx3d_enable,
+ .disable = clk_rcg2_shared_disable,
+ .get_parent = clk_rcg2_get_parent,
+ .set_parent = clk_rcg2_set_parent,
+ .recalc_rate = clk_rcg2_recalc_rate,
+ .determine_rate = clk_rcg2_gfx3d_determine_rate,
+ .set_rate = clk_rcg2_gfx3d_set_rate,
+ .set_rate_and_parent = clk_rcg2_gfx3d_set_rate_and_parent,
+};
+EXPORT_SYMBOL_GPL(clk_rcg2_gfx3d_ops);
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
