On Thu, Jul 12, 2018 at 3:30 AM Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
>
> Hi Matthias,
>
> On Wed, Jul 11, 2018 at 2:51 PM, Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote:
> > On Wed, Jul 11, 2018 at 11:44:13AM -0700, Doug Anderson wrote:
> >> Hi,
> >>
> >> On Mon, Jul 9, 2018 at 4:43 AM, Amit Kucheria <amit.kucheria@xxxxxxxxxx> wrote:
> >> > SDM845 has two tsens blocks, one with 13 sensors and the other with 8
> >> > sensors. It uses version 2 of the TSENS IP, so use the fallback property to
> >> > allow more common code.
> >> >
> >> > Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> >> > ---
> >> > arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++
> >> > 1 file changed, 16 insertions(+)
> >> >
> >> > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> >> > index cdaabeb..ba2899c 100644
> >> > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> >> > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> >> > @@ -221,6 +221,22 @@
> >> > #interrupt-cells = <2>;
> >> > };
> >> >
> >> > + tsens0: tsens@c263000 {
> >>
> >> As per my comments in the bindings, nit that this should probably be
> >> "thermal-sensor" not "tsens", AKA:
> >>
> >> tsens0: thermal-sensor@c263000 {
Fixed.
> >> > + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> >> > + reg = <0xc263000 0x1ff>, /* TM */
> >> > + <0xc222000 0x1ff>; /* SROT */
> >> > + #qcom,sensors = <13>;
> >>
> >> As per my comment in the bindings and the code, I'm confused about the
> >> whole "#qcom,sensors" bit. It's not documented and doesn't seem
> >> hooked up in the code either.
> >>
> >> ...but if people have tested this, perhaps I'm confused. How can
> >> things work if num_sensors is 0???
> >
> > The mystery is resolved by:
> >
> > commit 6d7c70d1cd6526dc79e3d3b3faae1c40c1681168
> > Author: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > Date: Mon May 7 16:53:39 2018 -0700
> >
> > thermal: qcom: tsens: Allow number of sensors to come from DT
> >
> > For platforms that has multiple copies of the TSENS hardware block it's
> > necessary to be able to specify the number of sensors per block in DeviceTree.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > Reviewed-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > Signed-off-by: Eduardo Valentin <edubezval@xxxxxxxxx>
> >
> >
> > I bumped into this during testing ;-)
I think this was merged in 4.17, so you didn't see it in your tree :-)
> Ah, now it makes sense to me! Serves me right for assuming it would
> be in the same series and not checking if it was something that had
> already landed. Thanks. Please ignore the parts of my comments
> related to the "#qcom,sensors" property. I guess Rob must have
> thought that the "#" in the name was fine and he's the one in charge
> not me.
Thanks for your review, Doug. I'll test this and post a v7 today. I'd
really like to get this accepted for 4.19 so I can post interrupt
support and some more cleanups.
Regards,
Amit
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
