On Mon, Jul 09, 2018 at 01:08:13PM -0700, Sujeev Dias wrote:
> QCOM PCIe based modems uses MHI as the communication protocol.
> MHI control driver is the bus master for such modems. As the bus
> master driver, it oversees power management operations
> such as suspend, resume, powering on and off the device.
>
> Signed-off-by: Sujeev Dias <sdias@xxxxxxxxxxxxxx>
> Reviewed-by: Tony Truong <truong@xxxxxxxxxxxxxx>
> Signed-off-by: Siddartha Mohanadoss <smohanad@xxxxxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/bus/mhi_qcom.txt | 58 +++
And this one in it's own patch.
> arch/arm64/configs/defconfig | 1 +
> drivers/bus/Kconfig | 1 +
> drivers/bus/mhi/Makefile | 1 +
> drivers/bus/mhi/controllers/Kconfig | 13 +
> drivers/bus/mhi/controllers/Makefile | 1 +
> drivers/bus/mhi/controllers/mhi_qcom.c | 461 +++++++++++++++++++++
> drivers/bus/mhi/controllers/mhi_qcom.h | 67 +++
> 8 files changed, 603 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/bus/mhi_qcom.txt
> create mode 100644 drivers/bus/mhi/controllers/Kconfig
> create mode 100644 drivers/bus/mhi/controllers/Makefile
> create mode 100644 drivers/bus/mhi/controllers/mhi_qcom.c
> create mode 100644 drivers/bus/mhi/controllers/mhi_qcom.h
>
> diff --git a/Documentation/devicetree/bindings/bus/mhi_qcom.txt b/Documentation/devicetree/bindings/bus/mhi_qcom.txt
> new file mode 100644
> index 0000000..0a48a50
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/bus/mhi_qcom.txt
> @@ -0,0 +1,58 @@
> +Qualcomm Technologies Inc MHI Bus controller
> +
> +MHI control driver enables clients to communicate with external mode
> +using MHI protocol.
> +
> +==============
> +Node Structure
> +==============
> +
> +Main node properties:
> +
> +- reg
> + Usage: required
> + Value type: Array (5-cell PCI resource) of <u32>
> + Definition: First cell is devfn, which is determined by pci bus topology.
> + Assign the other cells 0 since they are not used.
> +
> +- qcom,smmu-cfg
This should probably be part of the SMMU binding?
> + Usage: required
> + Value type: <u32>
> + Definition: Required SMMU configuration bitmask for PCIe bus.
> + BIT mask:
> + BIT(0) : Attach address mapping to endpoint device
> + BIT(1) : Set attribute S1_BYPASS
> + BIT(2) : Set attribute FAST
> + BIT(3) : Set attribute ATOMIC
> + BIT(4) : Set attribute FORCE_COHERENT
> +
> +- qcom,addr-win
> + Usage: required if SMMU S1 translation is enabled
> + Value type: Array of <u64>
> + Definition: Pair of values describing iova start and stop address
> +
> +- MHI bus settings
> + Usage: required
> + Values: as defined by mhi.txt
> + Definition: Per definition of devicetree/bindings/bus/mhi.txt, define device
> + specific MHI configuration parameters.
> +
> +========
> +Example:
> +========
> +
> +/* pcie domain (root complex) modem connected to */
> +&pcie1 {
> + /* pcie bus modem connected to */
> + pci,bus@1 {
> + reg = <0 0 0 0 0>;
> +
> + qcom,mhi {
> + reg = <0 0 0 0 0>;
2 levels of PCI addresses doesn't look right, but I can't really tell in
your example. The addresses don't look valid.
> + qcom,smmu-cfg = <0x3d>;
> + qcom,addr-win = <0x0 0x20000000 0x0 0x3fffffff>;
> +
> + <mhi bus configurations>
> + };
> + };
> +};
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
