Re: [PATCH v6 7/7] arm64: dts: sdm845: Add tsens nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon 09 Jul 04:43 PDT 2018, Amit Kucheria wrote:

> SDM845 has two tsens blocks, one with 13 sensors and the other with 8
> sensors. It uses version 2 of the TSENS IP, so use the fallback property to
> allow more common code.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> ---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index cdaabeb..ba2899c 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -221,6 +221,22 @@
>  			#interrupt-cells = <2>;
>  		};
>  
> +		tsens0: tsens@c263000 {
> +			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> +			reg = <0xc263000 0x1ff>, /* TM */
> +			      <0xc222000 0x1ff>; /* SROT */
> +			#qcom,sensors = <13>;
> +			#thermal-sensor-cells = <1>;
> +		};
> +
> +		tsens1: tsens@c265000 {
> +			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> +			reg = <0xc265000 0x1ff>, /* TM */
> +			      <0xc223000 0x1ff>; /* SROT */
> +			#qcom,sensors = <8>;
> +			#thermal-sensor-cells = <1>;
> +		};
> +
>  		spmi_bus: spmi@c440000 {
>  			compatible = "qcom,spmi-pmic-arb";
>  			reg = <0xc440000 0x1100>,
> -- 
> 2.7.4
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux