Re: [PATCH v6 6/8] interconnect: qcom: Add msm8916 interconnect provider driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Mon, Jul 09, 2018 at 06:51:02PM +0300, Georgi Djakov wrote:
> Add driver for the Qualcomm interconnect buses found in msm8916 based
> platforms.
> 
> Signed-off-by: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
> ---
>  drivers/interconnect/Kconfig        |   5 +
>  drivers/interconnect/Makefile       |   1 +
>  drivers/interconnect/qcom/Kconfig   |  10 +
>  drivers/interconnect/qcom/Makefile  |   2 +
>  drivers/interconnect/qcom/msm8916.c | 499 ++++++++++++++++++++++++++++
>  5 files changed, 517 insertions(+)
>  create mode 100644 drivers/interconnect/qcom/msm8916.c
> 
> diff --git a/drivers/interconnect/Kconfig b/drivers/interconnect/Kconfig
> index a261c7d41deb..07a8276fa35a 100644
> --- a/drivers/interconnect/Kconfig
> +++ b/drivers/interconnect/Kconfig
> @@ -8,3 +8,8 @@ menuconfig INTERCONNECT
>  
>  	  If unsure, say no.
>  
> +if INTERCONNECT
> +
> +source "drivers/interconnect/qcom/Kconfig"
> +
> +endif
> diff --git a/drivers/interconnect/Makefile b/drivers/interconnect/Makefile
> index 97fca2e09d24..7944cbca0527 100644
> --- a/drivers/interconnect/Makefile
> +++ b/drivers/interconnect/Makefile
> @@ -1,2 +1,3 @@
>  # SPDX-License-Identifier: GPL-2.0
>  obj-$(CONFIG_INTERCONNECT)		+= core.o
> +obj-$(CONFIG_INTERCONNECT_QCOM)		+= qcom/
> diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
> index b0c2ff928d88..a87afdef1bf7 100644
> --- a/drivers/interconnect/qcom/Kconfig
> +++ b/drivers/interconnect/qcom/Kconfig
> @@ -2,6 +2,8 @@ config INTERCONNECT_QCOM
>  	bool "Qualcomm Network-on-Chip interconnect drivers"
>  	depends on INTERCONNECT
>  	depends on ARCH_QCOM || COMPILE_TEST
> +	help
> +	  Support for Qualcomm's Network-on-Chip interconnect hardware.
>  
>  config INTERCONNECT_QCOM_SMD_RPM
>  	tristate "Qualcomm SMD RPM interconnect driver"
> @@ -9,3 +11,11 @@ config INTERCONNECT_QCOM_SMD_RPM
>  	help
>  	  This is a driver for communicating interconnect related configuration
>  	  details with a remote processor (RPM) on Qualcomm platforms.
> +
> +config INTERCONNECT_QCOM_MSM8916
> +	tristate "Qualcomm MSM8916 interconnect driver"
> +	depends on INTERCONNECT_QCOM
> +	select INTERCONNECT_QCOM_SMD_RPM
> +	help
> +	  This is a driver for the Qualcomm Network-on-Chip on msm8916-based
> +	  platforms.
> diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
> index 5b65e4011b59..53f3380277f6 100644
> --- a/drivers/interconnect/qcom/Makefile
> +++ b/drivers/interconnect/qcom/Makefile
> @@ -1,2 +1,4 @@
>  # SPDX-License-Identifier: GPL-2.0
>  obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += smd-rpm.o
> +
> +obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += msm8916.o
> diff --git a/drivers/interconnect/qcom/msm8916.c b/drivers/interconnect/qcom/msm8916.c
> new file mode 100644
> index 000000000000..f1d96f43e634
> --- /dev/null
> +++ b/drivers/interconnect/qcom/msm8916.c
> @@ -0,0 +1,499 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018 Linaro Ltd
> + * Author: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
> + */
> +
> +#include <dt-bindings/interconnect/qcom.h>
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/interconnect-provider.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#include "smd-rpm.h"
> +
> +#define RPM_BUS_MASTER_REQ      0x73616d62
> +#define RPM_BUS_SLAVE_REQ       0x766c7362
> +
> +#define to_qcom_provider(_provider) \
> +	container_of(_provider, struct qcom_icc_provider, provider)
> +
> +enum qcom_qos_mode {
> +	QCOM_QOS_MODE_BYPASS = 0,
> +	QCOM_QOS_MODE_FIXED,
> +	QCOM_QOS_MODE_MAX,
> +};
> +
> +struct qcom_icc_provider {
> +	struct icc_provider	provider;
> +	void __iomem		*base;
> +	struct clk		*bus_clk;
> +	struct clk		*bus_a_clk;
> +};
> +
> +#define MSM8916_MAX_LINKS	8
> +
> +/**
> + * struct qcom_icc_node - Qualcomm specific interconnect nodes
> + * @name: the node name used in debugfs
> + * @links: an array of nodes where we can go next while traversing
> + * @id: a unique node identifier

nit: move up to keep 'links' and 'num_links' together? Also 'name' and
'id' are similar fields, so keeping them together makes sense.

> + * @num_links: the total number of @links
> + * @port: the offset index into the masters QoS register space
> + * @buswidth: width of the interconnect between a node and the bus (bytes)
> + * @ap_owned: the AP CPU does the writing to QoS registers
> + * @qos_mode: QoS mode for ap_owned resources
> + * @mas_rpm_id:	RPM id for devices that are bus masters
> + * @slv_rpm_id:	RPM id for devices that are bus slaves
> + * @rate: current bus clock rate in Hz
> + */
> +struct qcom_icc_node {
> +	unsigned char *name;
> +	u16 links[MSM8916_MAX_LINKS];
> +	u16 id;
> +	u16 num_links;
> +	u16 port;
> +	u16 buswidth;
> +	bool ap_owned;
> +	enum qcom_qos_mode qos_mode;
> +	int mas_rpm_id;
> +	int slv_rpm_id;
> +	u64 rate;
> +};
> +
> +struct qcom_icc_desc {
> +	struct qcom_icc_node **nodes;
> +	size_t num_nodes;
> +};
> +
> +#define DEFINE_QNODE(_name, _id, _port, _buswidth, _ap_owned,		\
> +			_mas_rpm_id, _slv_rpm_id, _qos_mode,		\
> +			_numlinks, ...)					\
> +		static struct qcom_icc_node _name = {			\
> +		.id = _id,						\
> +		.name = #_name,						\

nit: init fields in same order as parameters.

> +		.port = _port,						\
> +		.buswidth = _buswidth,					\
> +		.qos_mode = _qos_mode,					\
> +		.ap_owned = _ap_owned,					\
> +		.mas_rpm_id = _mas_rpm_id,				\
> +		.slv_rpm_id = _slv_rpm_id,				\
> +		.num_links = _numlinks,					\
> +		.links = { __VA_ARGS__ },				\
> +	}
> +
> +DEFINE_QNODE(mas_video, MASTER_VIDEO_P0, 8, 16, 1, -1, -1, QCOM_QOS_MODE_BYPASS, 2, SNOC_MM_INT_0, SNOC_MM_INT_2);
> +DEFINE_QNODE(mas_jpeg, MASTER_JPEG, 6, 16, 1, -1, -1, QCOM_QOS_MODE_BYPASS, 2, SNOC_MM_INT_0, SNOC_MM_INT_2);
> +DEFINE_QNODE(mas_vfe, MASTER_VFE, 9, 16, 1, -1, -1, QCOM_QOS_MODE_BYPASS, 2, SNOC_MM_INT_1, SNOC_MM_INT_2);
> +DEFINE_QNODE(mas_mdp, MASTER_MDP_PORT0, 7, 16, 1, -1, -1, QCOM_QOS_MODE_BYPASS, 2, SNOC_MM_INT_0, SNOC_MM_INT_2);
> +DEFINE_QNODE(mas_qdss_bam, MASTER_QDSS_BAM, 11, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, SNOC_QDSS_INT);
> +DEFINE_QNODE(mas_snoc_cfg, MASTER_SNOC_CFG, 0, 16, 0, 20, -1, QCOM_QOS_MODE_BYPASS, 1, SNOC_QDSS_INT);
> +DEFINE_QNODE(mas_qdss_etr, MASTER_QDSS_ETR, 10, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, SNOC_QDSS_INT);
> +DEFINE_QNODE(mm_int_0, SNOC_MM_INT_0, 0, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, SNOC_MM_INT_BIMC);
> +DEFINE_QNODE(mm_int_1, SNOC_MM_INT_1, 0, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, SNOC_MM_INT_BIMC);
> +DEFINE_QNODE(mm_int_2, SNOC_MM_INT_2, 0, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, SNOC_INT_0);
> +DEFINE_QNODE(mm_int_bimc, SNOC_MM_INT_BIMC, 0, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, SNOC_BIMC_1_MAS);
> +DEFINE_QNODE(snoc_int_0, SNOC_INT_0, 0, 8, 0, 99, 130, QCOM_QOS_MODE_FIXED, 3, SLAVE_QDSS_STM, SLAVE_SYSTEM_IMEM, MNOC_BIMC_MAS);
> +DEFINE_QNODE(snoc_int_1, SNOC_INT_1, 0, 8, 0, 100, 131, QCOM_QOS_MODE_FIXED, 3, SYSTEM_SLAVE_FAB_APPS, SLAVE_CATS_128, SLAVE_OCMEM_64);
> +DEFINE_QNODE(snoc_int_bimc, SNOC_INT_BIMC, 0, 8, 0, 101, 132, QCOM_QOS_MODE_FIXED, 1, SNOC_BIMC_0_MAS);
> +DEFINE_QNODE(snoc_bimc_0_mas, SNOC_BIMC_0_MAS, 0, 8, 0, 3, -1, QCOM_QOS_MODE_FIXED, 1, SNOC_BIMC_0_SLV);
> +DEFINE_QNODE(snoc_bimc_1_mas, SNOC_BIMC_1_MAS, 0, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, SNOC_BIMC_1_SLV);
> +DEFINE_QNODE(qdss_int, SNOC_QDSS_INT, 0, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 2, SNOC_INT_0, SNOC_INT_BIMC);
> +DEFINE_QNODE(bimc_snoc_slv, BIMC_SNOC_SLV, 0, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 2, SNOC_INT_0, SNOC_INT_1);
> +DEFINE_QNODE(snoc_pnoc_mas, MNOC_BIMC_MAS, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, MNOC_BIMC_SLV);

Shouldn't this be SNOC_PNOC_MAS?

> +DEFINE_QNODE(pnoc_snoc_slv, PNOC_SNOC_SLV, 0, 8, 0, -1, 45, QCOM_QOS_MODE_FIXED, 3, SNOC_INT_0, SNOC_INT_BIMC, SNOC_INT_1);
> +DEFINE_QNODE(slv_srvc_snoc, SLAVE_SERVICE_SNOC, 0, 8, 0, -1, 29, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_qdss_stm, SLAVE_QDSS_STM, 0, 4, 0, -1, 30, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_imem, SLAVE_SYSTEM_IMEM, 0, 8, 0, -1, 26, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_apss, SYSTEM_SLAVE_FAB_APPS, 0, 4, 0, -1, 20, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_cats_0, SLAVE_CATS_128, 0, 16, 0, -1, 106, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_cats_1, SLAVE_OCMEM_64, 0, 8, 0, -1, 107, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(mas_apss, MASTER_AMPSS_M0, 0, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 3, SLAVE_EBI_CH0, BIMC_SNOC_MAS, SLAVE_AMPSS_L2);
> +DEFINE_QNODE(mas_tcu0, MASTER_TCU_0, 5, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 3, SLAVE_EBI_CH0, BIMC_SNOC_MAS, SLAVE_AMPSS_L2);
> +DEFINE_QNODE(mas_tcu1, MASTER_TCU_1, 6, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 3, SLAVE_EBI_CH0, BIMC_SNOC_MAS, SLAVE_AMPSS_L2);
> +DEFINE_QNODE(mas_gfx, MASTER_GRAPHICS_3D, 2, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 3, SLAVE_EBI_CH0, BIMC_SNOC_MAS, SLAVE_AMPSS_L2);
> +DEFINE_QNODE(bimc_snoc_mas, BIMC_SNOC_MAS, 0, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, BIMC_SNOC_SLV);
> +DEFINE_QNODE(snoc_bimc_0_slv, SNOC_BIMC_0_SLV, 0, 8, 0, -1, 24, QCOM_QOS_MODE_FIXED, 1, SLAVE_EBI_CH0);
> +DEFINE_QNODE(snoc_bimc_1_slv, SNOC_BIMC_1_SLV, 0, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, SLAVE_EBI_CH0);
> +DEFINE_QNODE(slv_ebi_ch0, SLAVE_EBI_CH0, 0, 8, 0, -1, 0, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_apps_l2, SLAVE_AMPSS_L2, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(snoc_pnoc_slv, MNOC_BIMC_SLV, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_INT_0);

Shouldn't this be SNOC_PNOC_SLV?

> +DEFINE_QNODE(pnoc_int_0, PNOC_INT_0, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 8, PNOC_SNOC_MAS, PNOC_SLV_0, PNOC_SLV_1, PNOC_SLV_2, PNOC_SLV_3, PNOC_SLV_4, PNOC_SLV_8, PNOC_SLV_9);
> +DEFINE_QNODE(pnoc_int_1, PNOC_INT_1, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_SNOC_MAS);
> +DEFINE_QNODE(pnoc_m_0, PNOC_M_0, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_INT_0);
> +DEFINE_QNODE(pnoc_m_1, PNOC_M_1, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_SNOC_MAS);
> +DEFINE_QNODE(pnoc_s_0, PNOC_SLV_0, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 5, SLAVE_CLK_CTL, SLAVE_TLMM, SLAVE_MSM_TCSR, SLAVE_SECURITY, SLAVE_MSS);
> +DEFINE_QNODE(pnoc_s_1, PNOC_SLV_1, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 5, SLAVE_IMEM_CFG, SLAVE_CRYPTO_0_CFG, SLAVE_RPM_MSG_RAM, SLAVE_MSM_PDM, SLAVE_PRNG);
> +DEFINE_QNODE(pnoc_s_2, PNOC_SLV_2, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 5, SLAVE_SPDM, SLAVE_BOOT_ROM, SLAVE_BIMC_CFG, SLAVE_PNOC_CFG, SLAVE_PMIC_ARB);
> +DEFINE_QNODE(pnoc_s_3, PNOC_SLV_3, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 5, SLAVE_MPM, SLAVE_IPS_CFG, SLAVE_RBCPR_CFG, SLAVE_QDSS_CFG, SLAVE_DEHR_CFG);
> +DEFINE_QNODE(pnoc_s_4, PNOC_SLV_4, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 3, SLAVE_VENUS_CFG, SLAVE_CAMERA_CFG, SLAVE_DISPLAY_CFG);
> +DEFINE_QNODE(pnoc_s_8, PNOC_SLV_8, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 3, SLAVE_USB_HS, SLAVE_SDCC_1, SLAVE_BLSP_1);
> +DEFINE_QNODE(pnoc_s_9, PNOC_SLV_9, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 3, SLAVE_SDCC_4, SLAVE_LPASS, SLAVE_GRAPHICS_3D_CFG);
> +DEFINE_QNODE(slv_imem_cfg, SLAVE_IMEM_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_crypto_0_cfg, SLAVE_CRYPTO_0_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_msg_ram, SLAVE_RPM_MSG_RAM, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_pdm, SLAVE_MSM_PDM, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_prng, SLAVE_PRNG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_clk_ctl, SLAVE_CLK_CTL, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_mss, SLAVE_MSS, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_tlmm, SLAVE_TLMM, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_tcsr, SLAVE_MSM_TCSR, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_security, SLAVE_SECURITY, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_spdm, SLAVE_SPDM, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_pnoc_cfg, SLAVE_PNOC_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_pmic_arb, SLAVE_PMIC_ARB, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_bimc_cfg, SLAVE_BIMC_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_boot_rom, SLAVE_BOOT_ROM, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_mpm, SLAVE_MPM, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_qdss_cfg, SLAVE_QDSS_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_rbcpr_cfg, SLAVE_RBCPR_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_snoc_cfg, SLAVE_IPS_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);

Shouldn't this be SLAVE_SNOC_CFG ?

> +DEFINE_QNODE(slv_dehr_cfg, SLAVE_DEHR_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_venus_cfg, SLAVE_VENUS_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_display_cfg, SLAVE_DISPLAY_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_camera_cfg, SLAVE_CAMERA_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_usb_hs, SLAVE_USB_HS, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_sdcc_1, SLAVE_SDCC_1, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_blsp_1, SLAVE_BLSP_1, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_sdcc_2, SLAVE_SDCC_4, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_gfx_cfg, SLAVE_GRAPHICS_3D_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_audio, SLAVE_LPASS, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(mas_blsp_1, MASTER_BLSP_1, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_M_1);
> +DEFINE_QNODE(mas_spdm, MASTER_SPDM, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_M_0);
> +DEFINE_QNODE(mas_dehr, MASTER_DEHR, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_M_0);
> +DEFINE_QNODE(mas_audio, MASTER_LPASS, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_M_0);
> +DEFINE_QNODE(mas_usb_hs, MASTER_USB_HS, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_M_1);
> +DEFINE_QNODE(mas_pnoc_crypto_0, MASTER_CRYPTO_CORE0, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_INT_1);
> +DEFINE_QNODE(mas_pnoc_sdcc_1, MASTER_SDCC_1, 7, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_INT_1);
> +DEFINE_QNODE(mas_pnoc_sdcc_2, MASTER_SDCC_2, 8, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_INT_1);
> +DEFINE_QNODE(pnoc_snoc_mas, PNOC_SNOC_MAS, 0, 8, 0, 29, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_SNOC_SLV);

nit: you could consider to group these by NoC and use alphabetical
order within each block, and also sort msm8916_*_nodes below. Purely
optional though :)

> +static struct qcom_icc_node *msm8916_snoc_nodes[] = {
> +	&mas_video,
> +	&mas_jpeg,
> +	&mas_vfe,
> +	&mas_mdp,
> +	&mas_qdss_bam,
> +	&mas_snoc_cfg,
> +	&mas_qdss_etr,
> +	&mm_int_0,
> +	&mm_int_1,
> +	&mm_int_2,
> +	&mm_int_bimc,
> +	&snoc_int_0,
> +	&snoc_int_1,
> +	&snoc_int_bimc,
> +	&snoc_bimc_0_mas,
> +	&snoc_bimc_1_mas,
> +	&qdss_int,
> +	&bimc_snoc_slv,
> +	&snoc_pnoc_mas,
> +	&pnoc_snoc_slv,
> +	&slv_srvc_snoc,
> +	&slv_qdss_stm,
> +	&slv_imem,
> +	&slv_apss,
> +	&slv_cats_0,
> +	&slv_cats_1,
> +};
> +
> +static struct qcom_icc_desc msm8916_snoc = {
> +	.nodes = msm8916_snoc_nodes,
> +	.num_nodes = ARRAY_SIZE(msm8916_snoc_nodes),
> +};
> +
> +static struct qcom_icc_node *msm8916_bimc_nodes[] = {
> +	&mas_apss,
> +	&mas_tcu0,
> +	&mas_tcu1,
> +	&mas_gfx,
> +	&bimc_snoc_mas,
> +	&snoc_bimc_0_slv,
> +	&snoc_bimc_1_slv,
> +	&slv_ebi_ch0,
> +	&slv_apps_l2,
> +};
> +
> +static struct qcom_icc_desc msm8916_bimc = {
> +	.nodes = msm8916_bimc_nodes,
> +	.num_nodes = ARRAY_SIZE(msm8916_bimc_nodes),
> +};
> +
> +static struct qcom_icc_node *msm8916_pnoc_nodes[] = {
> +	&snoc_pnoc_slv,
> +	&pnoc_int_0,
> +	&pnoc_int_1,
> +	&pnoc_m_0,
> +	&pnoc_m_1,
> +	&pnoc_s_0,
> +	&pnoc_s_1,
> +	&pnoc_s_2,
> +	&pnoc_s_3,
> +	&pnoc_s_4,
> +	&pnoc_s_8,
> +	&pnoc_s_9,
> +	&slv_imem_cfg,
> +	&slv_crypto_0_cfg,
> +	&slv_msg_ram,
> +	&slv_pdm,
> +	&slv_prng,
> +	&slv_clk_ctl,
> +	&slv_mss,
> +	&slv_tlmm,
> +	&slv_tcsr,
> +	&slv_security,
> +	&slv_spdm,
> +	&slv_pnoc_cfg,
> +	&slv_pmic_arb,
> +	&slv_bimc_cfg,
> +	&slv_boot_rom,
> +	&slv_mpm,
> +	&slv_qdss_cfg,
> +	&slv_rbcpr_cfg,
> +	&slv_snoc_cfg,
> +	&slv_dehr_cfg,
> +	&slv_venus_cfg,
> +	&slv_display_cfg,
> +	&slv_camera_cfg,
> +	&slv_usb_hs,
> +	&slv_sdcc_1,
> +	&slv_blsp_1,
> +	&slv_sdcc_2,
> +	&slv_gfx_cfg,
> +	&slv_audio,
> +	&mas_blsp_1,
> +	&mas_spdm,
> +	&mas_dehr,
> +	&mas_audio,
> +	&mas_usb_hs,
> +	&mas_pnoc_crypto_0,
> +	&mas_pnoc_sdcc_1,
> +	&mas_pnoc_sdcc_2,
> +	&pnoc_snoc_mas,
> +};
> +
> +static struct qcom_icc_desc msm8916_pnoc = {
> +	.nodes = msm8916_pnoc_nodes,
> +	.num_nodes = ARRAY_SIZE(msm8916_pnoc_nodes),
> +};
> +
> +static int qcom_icc_aggregate(struct icc_node *node, u32 avg_bw, u32 peak_bw,
> +			      u32 *agg_avg, u32 *agg_peak)
> +{
> +	*agg_avg += avg_bw;
> +	*agg_peak = max(*agg_peak, peak_bw);
> +
> +	return 0;
> +}
> +
> +static int qcom_icc_set(struct icc_node *src, struct icc_node *dst,
> +			u32 avg, u32 peak)
> +{
> +	struct qcom_icc_provider *qp;
> +	struct qcom_icc_node *qn;
> +	struct icc_node *node;
> +	struct icc_provider *provider;
> +	u64 avg_bw = icc_units_to_bps(avg);
> +	u64 peak_bw = icc_units_to_bps(peak);
> +	u64 rate = 0;

Initialization is unnecessary.

> +	int ret = 0;
> +
> +	if (!src)
> +		node = dst;
> +	else
> +		node = src;
> +
> +	qn = node->data;
> +	provider = node->provider;
> +	qp = to_qcom_provider(node->provider);

nit: you could pass provider instead of node->provider.

> +
> +	/* set bandwidth */
> +	if (qn->ap_owned) {
> +		/* TODO: set QoS */
> +	} else {
> +		/* send message to the RPM processor */
> +		if (qn->mas_rpm_id != -1) {
> +			ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
> +						    RPM_BUS_MASTER_REQ,
> +						    qn->mas_rpm_id,
> +						    avg_bw);
> +			if (ret) {
> +				pr_err("qcom_icc_rpm_smd_send mas error %d\n",
> +				       ret);
> +				return ret;
> +			}
> +		}
> +
> +		if (qn->slv_rpm_id != -1) {
> +			ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
> +						    RPM_BUS_SLAVE_REQ,
> +						    qn->slv_rpm_id,
> +						    avg_bw);
> +			if (ret) {
> +				pr_err("qcom_icc_rpm_smd_send slv error %d\n",
> +				       ret);
> +				return ret;
> +			}
> +		}
> +	}
> +
> +	rate = max(avg_bw, peak_bw);

This looks trivial, however avg_bw is a sum of average bandwidths and
peak_bw is the max peak bandwidth of all nodes, which is not evident
in this context. I guess it makes sense since a node that uses it's
peak bandwdith frequently would have a average bandwidth close to that
value, which would be reflected in avg_bw.

> +static int qnoc_probe(struct platform_device *pdev)
> +{
> +	const struct qcom_icc_desc *desc;
> +	struct qcom_icc_node **qnodes;
> +	struct icc_node *node;
> +	struct qcom_icc_provider *qp;
> +	struct resource *res;
> +	struct icc_provider *provider;
> +	size_t num_nodes, i;
> +	int ret;
> +
> +	/* wait for RPM */
> +	if (!qcom_icc_rpm_smd_available())
> +		return -EPROBE_DEFER;
> +
> +	desc = of_device_get_match_data(&pdev->dev);
> +	if (!desc)
> +		return -EINVAL;
> +
> +	qnodes = desc->nodes;
> +	num_nodes = desc->num_nodes;
> +
> +	qp = devm_kzalloc(&pdev->dev, sizeof(*qp), GFP_KERNEL);
> +	if (!qp)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	qp->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(qp->base))
> +		return PTR_ERR(qp->base);
> +
> +	qp->bus_clk = devm_clk_get(&pdev->dev, "bus_clk");
> +	if (IS_ERR(qp->bus_clk))
> +		return PTR_ERR(qp->bus_clk);
> +
> +	ret = clk_prepare_enable(qp->bus_clk);
> +	if (ret) {
> +		dev_err(&pdev->dev, "error enabling bus_clk: %d\n", ret);
> +		return ret;
> +	}
> +
> +	qp->bus_a_clk = devm_clk_get(&pdev->dev, "bus_a_clk");
> +	if (IS_ERR(qp->bus_a_clk))

		clk_disable_unprepare(qp->bus_clk);

Same for other error paths.

> +		return PTR_ERR(qp->bus_a_clk);
> +
> +	ret = clk_prepare_enable(qp->bus_a_clk);
> +	if (ret) {
> +		dev_err(&pdev->dev, "error enabling bus_a_clk: %d\n", ret);
> +		return ret;
> +	}
> +
> +	provider = &qp->provider;
> +	provider->dev = &pdev->dev;
> +	provider->set = &qcom_icc_set;
> +	provider->aggregate = &qcom_icc_aggregate;
> +	INIT_LIST_HEAD(&provider->nodes);
> +	provider->data = qp;
> +
> +	ret = icc_provider_add(provider);
> +	if (ret) {
> +		dev_err(&pdev->dev, "error adding interconnect provider\n");

		clk_disable_unprepare(qp->bus_a_clk);

Same for other error paths.

> +		return ret;
> +	}
> +
> +	for (i = 0; i < num_nodes; i++) {
> +		int ret;
> +		size_t j;
> +
> +		node = icc_node_create(qnodes[i]->id);
> +		if (IS_ERR(node)) {
> +			ret = PTR_ERR(node);
> +			goto err;
> +		}
> +
> +		node->name = qnodes[i]->name;
> +		node->data = qnodes[i];
> +		icc_node_add(node, provider);
> +
> +		dev_dbg(&pdev->dev, "registered node %s\n", node->name);
> +
> +		/* populate links */
> +		for (j = 0; j < qnodes[i]->num_links; j++)
> +			if (qnodes[i]->links[j])
> +				icc_link_create(node, qnodes[i]->links[j]);
> +	}
> +
> +	platform_set_drvdata(pdev, provider);
> +
> +	return ret;
> +err:
> +	list_for_each_entry(node, &provider->nodes, node_list) {
> +		icc_node_del(node);
> +		icc_node_destroy(node->id);
> +	}
> +	icc_provider_del(provider);
> +
> +	return ret;
> +}
> +
> +static int qnoc_remove(struct platform_device *pdev)
> +{
> +	struct icc_provider *provider = platform_get_drvdata(pdev);
> +	struct icc_node *n;
> +
> +	list_for_each_entry(n, &provider->nodes, node_list) {
> +		icc_node_del(n);
> +		icc_node_destroy(n->id);
> +	}

	clk_disable_unprepare(qp->bus_a_clk);
	clk_disable_unprepare(qp->bus_clk);

Cheers

Matthias
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux