[PATCH v5 6/6] crypto: qcom: Add ACPI support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Timur Tabi <timur@xxxxxxxxxxxxxx>

Add support for probing on ACPI systems, with ACPI HID QCOM8160.

On ACPI systems, clocks are always enabled, the PRNG should
already be enabled, and the register region is read-only.
The driver only verifies that the hardware is already
enabled never tries to disable or configure it.

Signed-off-by: Timur Tabi <timur@xxxxxxxxxxxxxx>
[port to crypto API]
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
 drivers/crypto/qcom-rng.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/crypto/qcom-rng.c b/drivers/crypto/qcom-rng.c
index f1bd86acaf9d..8118d4cd93b2 100644
--- a/drivers/crypto/qcom-rng.c
+++ b/drivers/crypto/qcom-rng.c
@@ -4,6 +4,7 @@
 // Based on msm-rng.c and downstream driver
 
 #include <crypto/internal/rng.h>
+#include <linux/acpi.h>
 #include <linux/clk.h>
 #include <linux/crypto.h>
 #include <linux/module.h>
@@ -168,13 +169,17 @@ static int qcom_rng_probe(struct platform_device *pdev)
 	if (IS_ERR(rng->base))
 		return PTR_ERR(rng->base);
 
-	rng->clk = devm_clk_get(&pdev->dev, "core");
-	if (IS_ERR(rng->clk))
-		return PTR_ERR(rng->clk);
 
-	rng->skip_init = (unsigned long)of_device_get_match_data(&pdev->dev);
+	/* ACPI systems have clk already on, so skip clk_get */
+	if (!has_acpi_companion(&pdev->dev)) {
+		rng->clk = devm_clk_get(&pdev->dev, "core");
+		if (IS_ERR(rng->clk))
+			return PTR_ERR(rng->clk);
+	}
 
+	rng->skip_init = (unsigned long)device_get_match_data(&pdev->dev);
 	qcom_rng_dev = rng;
+
 	ret = crypto_register_rng(&qcom_rng_alg);
 	if (ret) {
 		dev_err(&pdev->dev, "Register crypto rng failed: %d\n", ret);
@@ -193,6 +198,14 @@ static int qcom_rng_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id qcom_rng_acpi_match[] = {
+	{ .id = "QCOM8160", .driver_data = 1 },
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, qcom_rng_acpi_match);
+#endif
+
 static const struct of_device_id qcom_rng_of_match[] = {
 	{ .compatible = "qcom,prng", .data = (void *)0},
 	{ .compatible = "qcom,prng-ee", .data = (void *)1},
@@ -206,6 +219,7 @@ static struct platform_driver qcom_rng_driver = {
 	.driver = {
 		.name = KBUILD_MODNAME,
 		.of_match_table = of_match_ptr(qcom_rng_of_match),
+		.acpi_match_table = ACPI_PTR(qcom_rng_acpi_match),
 	}
 };
 module_platform_driver(qcom_rng_driver);
-- 
2.14.4

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux