Hi Vinod,
On Sat, Jul 07, 2018 at 10:44:14AM +0530, Vinod wrote:
> On 28-06-18, 20:38, Vinod Koul wrote:
> > Resin is similar to pwrkey, add the description and example
> > for resin bindings
>
> I think this should go thru your tree as well
Right. I just queued this one with Rob's Reviewed-by.
-- Sebastian
> > Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> > ---
> > .../devicetree/bindings/input/qcom,pm8941-pwrkey.txt | 1 +
> > Documentation/devicetree/bindings/power/reset/qcom,pon.txt | 14 ++++++++++++--
> > 2 files changed, 13 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > index bf719396eadd..34ab5763f494 100644
> > --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > @@ -7,6 +7,7 @@ PROPERTIES
> > Value type: <string>
> > Definition: must be one of:
> > "qcom,pm8941-pwrkey"
> > + "qcom,pm8941-resin"
> >
> > - reg:
> > Usage: required
> > diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
> > index f32cdd358267..651491bb63b7 100644
> > --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
> > +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
> > @@ -1,9 +1,9 @@
> > Qualcomm PON Device
> >
> > The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
> > -along with the Android reboot-mode.
> > +and resin along with the Android reboot-mode.
> >
> > -This DT node has pwrkey as sub node.
> > +This DT node has pwrkey and resin as sub nodes.
> >
> > Required Properties:
> > -compatible: "qcom,pm8916-pon"
> > @@ -12,6 +12,8 @@ Required Properties:
> > Optional subnode:
> > -pwrkey: Specifies the subnode pwrkey and should follow the
> > qcom,pm8941-pwrkey.txt description.
> > +-resin: Specifies the subnode resin and should follow the
> > + qcom,pm8xxx-pwrkey.txt description.
> >
> > The rest of the properties should follow the generic reboot-mode description
> > found in reboot-mode.txt
> > @@ -32,4 +34,12 @@ Example:
> > bias-pull-up;
> > linux,code = <KEY_POWER>;
> > };
> > +
> > + resin {
> > + compatible = "qcom,pm8941-resin";
> > + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> > + debounce = <15625>;
> > + bias-pull-up;
> > + linux,code = <KEY_VOLUMEDOWN>;
> > + };
> > };
> > --
> > 2.14.4
>
> --
> ~Vinod
Attachment:
signature.asc
Description: PGP signature
