Hi Sebastian,
On 28-06-18, 20:38, Vinod Koul wrote:
> Add support Qualcomm PM8xxx PON which is responsible for reboot
> mode support.
Any feedback for this patch/series?
> Co-developed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> ---
> drivers/power/reset/Kconfig | 11 +++++
> drivers/power/reset/Makefile | 1 +
> drivers/power/reset/qcom-pon.c | 91 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 103 insertions(+)
> create mode 100644 drivers/power/reset/qcom-pon.c
>
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index df58fc878b3e..6533aa560aa1 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -104,6 +104,17 @@ config POWER_RESET_MSM
> help
> Power off and restart support for Qualcomm boards.
>
> +config POWER_RESET_QCOM_PON
> + tristate "Qualcomm power-on driver"
> + depends on ARCH_QCOM
> + depends on MFD_SPMI_PMIC
> + select REBOOT_MODE
> + help
> + Power On support for Qualcomm boards.
> + If you have a Qualcomm platform and need support for
> + power-on and reboot reason, Say Y.
> + If unsure, Say N.
> +
> config POWER_RESET_OCELOT_RESET
> bool "Microsemi Ocelot reset driver"
> depends on MSCC_OCELOT || COMPILE_TEST
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index 7778c7485cf1..0aebee954ac1 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
> obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
> obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
> obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
> +obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
> obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
> obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
> obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
> diff --git a/drivers/power/reset/qcom-pon.c b/drivers/power/reset/qcom-pon.c
> new file mode 100644
> index 000000000000..0c4caaa7e88f
> --- /dev/null
> +++ b/drivers/power/reset/qcom-pon.c
> @@ -0,0 +1,91 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2017-18 Linaro Limited
> +
> +#include <linux/delay.h>
> +#include <linux/errno.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/reboot.h>
> +#include <linux/reboot-mode.h>
> +#include <linux/regmap.h>
> +
> +#define PON_SOFT_RB_SPARE 0x8f
> +
> +struct pm8916_pon {
> + struct device *dev;
> + struct regmap *regmap;
> + u32 baseaddr;
> + struct reboot_mode_driver reboot_mode;
> +};
> +
> +static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot,
> + unsigned int magic)
> +{
> + struct pm8916_pon *pon = container_of
> + (reboot, struct pm8916_pon, reboot_mode);
> + int ret;
> +
> + ret = regmap_update_bits(pon->regmap,
> + pon->baseaddr + PON_SOFT_RB_SPARE,
> + 0xfc, magic << 2);
> + if (ret < 0)
> + dev_err(pon->dev, "update reboot mode bits failed\n");
> +
> + return ret;
> +}
> +
> +static int pm8916_pon_probe(struct platform_device *pdev)
> +{
> + struct pm8916_pon *pon;
> + int error;
> +
> + pon = devm_kzalloc(&pdev->dev, sizeof(*pon), GFP_KERNEL);
> + if (!pon)
> + return -ENOMEM;
> +
> + pon->dev = &pdev->dev;
> +
> + pon->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> + if (!pon->regmap) {
> + dev_err(&pdev->dev, "failed to locate regmap\n");
> + return -ENODEV;
> + }
> +
> + error = of_property_read_u32(pdev->dev.of_node, "reg",
> + &pon->baseaddr);
> + if (error)
> + return error;
> +
> + pon->reboot_mode.dev = &pdev->dev;
> + pon->reboot_mode.write = pm8916_reboot_mode_write;
> + error = devm_reboot_mode_register(&pdev->dev, &pon->reboot_mode);
> + if (error) {
> + dev_err(&pdev->dev, "can't register reboot mode\n");
> + return error;
> + }
> +
> + platform_set_drvdata(pdev, pon);
> +
> + return devm_of_platform_populate(&pdev->dev);
> +}
> +
> +static const struct of_device_id pm8916_pon_id_table[] = {
> + { .compatible = "qcom,pm8916-pon" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, pm8916_pon_id_table);
> +
> +static struct platform_driver pm8916_pon_driver = {
> + .probe = pm8916_pon_probe,
> + .driver = {
> + .name = "pm8916-pon",
> + .of_match_table = of_match_ptr(pm8916_pon_id_table),
> + },
> +};
> +module_platform_driver(pm8916_pon_driver);
> +
> +MODULE_DESCRIPTION("pm8916 Power On driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.14.4
--
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
