On Tue, Jul 03, 2018 at 09:31:24AM -0400, Sinan Kaya wrote: > Issue is observing hotplug link down event in the middle of AER recovery > as in my previous reply. > > If we mask hotplug interrupts before secondary bus reset via my patch, > then hotplug driver will not observe both link up and link down interrupts. > > If we don't mask hotplug interrupts, we have a race condition. I assume that a bus reset not only causes a link and presence event but also clears the Presence Detect State bit in the Slot Status register and the Data Link Layer Link Active bit in the Link Status register momentarily. pciehp may access those two bits concurrently to the AER driver performing a slot reset. So it may not be sufficient to mask the interrupt. I've posted this patch to address the issue: https://patchwork.ozlabs.org/patch/930391/ Thanks, Lukas -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
