The Power On device for Qcom PM 8xxx is a MFD supporting pwrkey and
resin along with the Android reboot-mode.
Add the binding describing this.
Suggested-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
.../devicetree/bindings/power/reset/qcom,pon.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
new file mode 100644
index 000000000000..f32cdd358267
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
@@ -0,0 +1,35 @@
+Qualcomm PON Device
+
+The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
+along with the Android reboot-mode.
+
+This DT node has pwrkey as sub node.
+
+Required Properties:
+-compatible: "qcom,pm8916-pon"
+-reg: Specifies the physical address of the pon register
+
+Optional subnode:
+-pwrkey: Specifies the subnode pwrkey and should follow the
+ qcom,pm8941-pwrkey.txt description.
+
+The rest of the properties should follow the generic reboot-mode description
+found in reboot-mode.txt
+
+Example:
+
+ pon@800 {
+ compatible = "qcom,pm8916-pon";
+
+ reg = <0x800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+ };
--
2.14.4
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
