Re: [PATCH v4 5/6] dt-bindings: power: reset: qcom: Add resin binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed 27 Jun 04:53 PDT 2018, Vinod Koul wrote:

> Resin is similar to pwrkey, add the description and example
> for resin bindings
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/input/qcom,pm8941-pwrkey.txt       |  1 +
>  Documentation/devicetree/bindings/power/reset/qcom,pon.txt | 14 ++++++++++++--
>  2 files changed, 13 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> index bf719396eadd..34ab5763f494 100644
> --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> @@ -7,6 +7,7 @@ PROPERTIES
>  	Value type: <string>
>  	Definition: must be one of:
>  		    "qcom,pm8941-pwrkey"
> +		    "qcom,pm8941-resin"
>  
>  - reg:
>  	Usage: required
> diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
> index f32cdd358267..651491bb63b7 100644
> --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
> +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
> @@ -1,9 +1,9 @@
>  Qualcomm PON Device
>  
>  The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
> -along with the Android reboot-mode.
> +and resin along with the Android reboot-mode.
>  
> -This DT node has pwrkey as sub node.
> +This DT node has pwrkey and resin as sub nodes.
>  
>  Required Properties:
>  -compatible: "qcom,pm8916-pon"
> @@ -12,6 +12,8 @@ Required Properties:
>  Optional subnode:
>  -pwrkey: Specifies the subnode pwrkey and should follow the
>   qcom,pm8941-pwrkey.txt description.
> +-resin: Specifies the subnode resin and should follow the
> + qcom,pm8xxx-pwrkey.txt description.
>  
>  The rest of the properties should follow the generic reboot-mode description
>  found in reboot-mode.txt
> @@ -32,4 +34,12 @@ Example:
>  			bias-pull-up;
>  			linux,code = <KEY_POWER>;
>  		};
> +
> +		resin {
> +			compatible = "qcom,pm8941-resin";
> +			interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> +			debounce = <15625>;
> +			bias-pull-up;
> +			linux,code = <KEY_VOLUMEDOWN>;
> +		};
>  	};
> -- 
> 2.14.4
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux