To add support for reboot reason there have been some attempts [1], [2] in past. Based on these discussions we added a new pon driver and made pwrkey and resin as child nodes to pon. Since the pwrkey and resin are similar, abstract pwrkey driver and then add support for resin in the same driver. Since the patches touch reset and input subsystems, it would be nice if folks can ACK and we carry thru one subsystem, I would prefer that to be input, other way would work fine too. [1]: https://patchwork.kernel.org/patch/9751627/ [2]: https://patchwork.kernel.org/patch/10381801/ Changes in v2: - Add Bjorn's ack - Fix power binding by removing reg property - Use single block for parent check in pm8941-pwrkey as suggested by Dimitry Vinod Koul (5): dt-bindings: power: reset: Add qcom pon binding power: reset: qcom-pon: Add Qcom PON driver dt-bindings: Input: Add additional property to qcom pwrkey input: pm8941-pwrkey: Abstract register offsets and event code input: pm8941-pwrkey: Add resin entry .../bindings/input/qcom,pm8941-pwrkey.txt | 9 +++ .../devicetree/bindings/power/reset/qcom,pon.txt | 45 +++++++++++ drivers/input/misc/pm8941-pwrkey.c | 69 ++++++++++++---- drivers/power/reset/Kconfig | 8 ++ drivers/power/reset/Makefile | 1 + drivers/power/reset/qcom-pon.c | 91 ++++++++++++++++++++++ 6 files changed, 210 insertions(+), 13 deletions(-) create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt create mode 100644 drivers/power/reset/qcom-pon.c -- 2.14.4 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
