On Wed 13 Jun 08:20 PDT 2018, Stephen Boyd wrote:
> Add basic support for the pm8005 and pm8998 PMICs. For now just support
> the GPIO controllers.
>
> Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Regards,
Bjorn
> ---
> arch/arm64/boot/dts/qcom/pm8005.dtsi | 33 +++++++++++++++++
> arch/arm64/boot/dts/qcom/pm8998.dtsi | 55 ++++++++++++++++++++++++++++
> 2 files changed, 88 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/pm8005.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/pm8998.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
> new file mode 100644
> index 000000000000..4d5aca3eeb69
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
> @@ -0,0 +1,33 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/* Copyright 2018 Google LLC. */
> +
> +#include <dt-bindings/spmi/spmi.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +&spmi_bus {
> + pm8005_lsid0: pmic@4 {
> + compatible = "qcom,pm8005", "qcom,spmi-pmic";
> + reg = <0x4 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pm8005_gpio: gpios@c000 {
> + compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
> + reg = <0xc000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
> + <0 0xc1 0 IRQ_TYPE_NONE>,
> + <0 0xc2 0 IRQ_TYPE_NONE>,
> + <0 0xc3 0 IRQ_TYPE_NONE>;
> + };
> +
> + };
> +
> + pm8005_lsid1: pmic@5 {
> + compatible = "qcom,pm8005", "qcom,spmi-pmic";
> + reg = <0x5 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> new file mode 100644
> index 000000000000..92bed1e7d4bb
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> @@ -0,0 +1,55 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/* Copyright 2018 Google LLC. */
> +
> +#include <dt-bindings/spmi/spmi.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +&spmi_bus {
> + pm8998_lsid0: pmic@0 {
> + compatible = "qcom,pm8998", "qcom,spmi-pmic";
> + reg = <0x0 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pm8998_gpio: gpios@c000 {
> + compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
> + reg = <0xc000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
> + <0 0xc1 0 IRQ_TYPE_NONE>,
> + <0 0xc2 0 IRQ_TYPE_NONE>,
> + <0 0xc3 0 IRQ_TYPE_NONE>,
> + <0 0xc4 0 IRQ_TYPE_NONE>,
> + <0 0xc5 0 IRQ_TYPE_NONE>,
> + <0 0xc6 0 IRQ_TYPE_NONE>,
> + <0 0xc7 0 IRQ_TYPE_NONE>,
> + <0 0xc8 0 IRQ_TYPE_NONE>,
> + <0 0xc9 0 IRQ_TYPE_NONE>,
> + <0 0xca 0 IRQ_TYPE_NONE>,
> + <0 0xcb 0 IRQ_TYPE_NONE>,
> + <0 0xcc 0 IRQ_TYPE_NONE>,
> + <0 0xcd 0 IRQ_TYPE_NONE>,
> + <0 0xce 0 IRQ_TYPE_NONE>,
> + <0 0xcf 0 IRQ_TYPE_NONE>,
> + <0 0xd0 0 IRQ_TYPE_NONE>,
> + <0 0xd1 0 IRQ_TYPE_NONE>,
> + <0 0xd2 0 IRQ_TYPE_NONE>,
> + <0 0xd3 0 IRQ_TYPE_NONE>,
> + <0 0xd4 0 IRQ_TYPE_NONE>,
> + <0 0xd5 0 IRQ_TYPE_NONE>,
> + <0 0xd6 0 IRQ_TYPE_NONE>,
> + <0 0xd7 0 IRQ_TYPE_NONE>,
> + <0 0xd8 0 IRQ_TYPE_NONE>,
> + <0 0xd9 0 IRQ_TYPE_NONE>;
> + };
> +
> + };
> +
> + pm8998_lsid1: pmic@1 {
> + compatible = "qcom,pm8998", "qcom,spmi-pmic";
> + reg = <0x1 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +};
> --
> Sent by a computer through tubes
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
