[PATCH v8 24/26] drivers: firmware: psci: Deal with CPU hotplug when using OSI mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



To deal with CPU hotplug when OSI mode is used, the CPU device needs to be
detached from its PM domain (genpd) when putting it offline, otherwise the
CPU becomes considered as being in use from genpd and runtime PM point of
view. Obviously, then we also need to re-attach the CPU device when bring
the CPU back online, so let's do this.

Cc: Lina Iyer <ilina@xxxxxxxxxxxxxx>
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
---
 drivers/firmware/psci/psci.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/firmware/psci/psci.c b/drivers/firmware/psci/psci.c
index 700e0e995871..e649673d71f0 100644
--- a/drivers/firmware/psci/psci.c
+++ b/drivers/firmware/psci/psci.c
@@ -190,6 +190,10 @@ static int psci_cpu_off(u32 state)
 	int err;
 	u32 fn;
 
+	/* If running OSI mode, detach the CPU device from its PM domain. */
+	if (psci_osi_mode_enabled)
+		of_genpd_detach_cpu(smp_processor_id());
+
 	fn = psci_function_id[PSCI_FN_CPU_OFF];
 	err = invoke_psci_fn(fn, state, 0, 0);
 	return psci_to_linux_errno(err);
@@ -204,6 +208,10 @@ static int psci_cpu_on(unsigned long cpuid, unsigned long entry_point)
 	err = invoke_psci_fn(fn, cpuid, entry_point, 0);
 	/* Clear the domain state to start fresh. */
 	psci_set_domain_state(0);
+
+	if (!err && psci_osi_mode_enabled)
+		of_genpd_attach_cpu(cpuid);
+
 	return psci_to_linux_errno(err);
 }
 
-- 
2.17.1

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux