On Mon, Jun 18 2018 at 14:56 -0600, Douglas Anderson wrote:
This adds the rpmh-rsc node to sdm845 based on the examples in the
bindings.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index cd308b84bed7..19b006293d3b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
/ {
interrupt-parent = <&intc>;
@@ -984,6 +985,24 @@
#mbox-cells = <1>;
};
+ apps_rsc: rsc@179c0000 {
+ label = "apps_rsc";
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x179c0000 0x10000>,
+ <0x179d0000 0x10000>,
+ <0x179e0000 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <SLEEP_TCS 3>,
+ <WAKE_TCS 3>,
+ <ACTIVE_TCS 2>,
+ <CONTROL_TCS 1>;
Sorry, my example had this incorrect order and I just noticed this. We
will need to fix the example as well.
The first TCS should be ACTIVE_TCS, then followed by SLEEP_TCS and
WAKE_TCS. This order is important and should match what is set in the
firmware.
qcom,tcs-config = <ACTIVE_TCS 2>,
<SLEEP_TCS 3>,
<WAKE_TCS 3>,
<CONTROL_TCS 1>;
While the above configuration would work for now, it would fail, when we
enable system low power modes, which would use TCSes 2-7 for sleep and
wake set transitions from the firmware.
Thanks,
Lina
+ };
+
intc: interrupt-controller@17a00000 {
compatible = "arm,gic-v3";
#address-cells = <1>;
--
2.18.0.rc1.244.gcf134e6275-goog
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
