On Sat, Jun 16, 2018 at 12:27 AM, Balakrishna Godavarthi
<bgodavar@xxxxxxxxxxxxxx> wrote:
> Signed-off-by: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
Commit messag missing.
Please use get_maintainers.pl and send patches to the right lists. DT
list in this case.
> ---
> Changes in v7:
> * no change.
>
> Changes in v6:
>
> * Changed the oper-speed to max-speed.
>
> Changes in v5:
>
> * Added entry for oper-speed and init-speed.
>
> ---
> .../bindings/net/qualcomm-bluetooth.txt | 31 +++++++++++++++++--
> 1 file changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
> index 0ea18a53cc29..c4590bc87390 100644
> --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
> +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
> @@ -10,12 +10,24 @@ device the slave device is attached to.
> Required properties:
> - compatible: should contain one of the following:
> * "qcom,qca6174-bt"
> + * "qcom,wcn3990-bt"
>
> Optional properties:
> - enable-gpios: gpio specifier used to enable chip
> - clocks: clock provided to the controller (SUSCLK_32KHZ)
> -
> -Example:
> + - vddpa-supply: Bluetooth VDD PA regulator handle
> + - vddio-supply: Bluetooth VDD IO regulator handle
> + - vddldo-supply: Bluetooth VDD LDO regulator handle. Kept under optional
> + parameters as some of the chipsets doesn't require ldo or
> + it may use from same vddio.
You need to be explicit as to which properties apply or don't apply to
specific compatible strings.
Supplies should be based on inputs to the chip, so if 1 regulator
supplies 2 inputs you still need both.
> + - vddxtal-supply: Bluetooth VDD XTAL regulator handle
> + - vddcore-supply: Bluetooth VDD CORE regulator handle
> + - vddpwd-supply: Chip power down gpio is required when bluetooth module
> + and other modules like wifi co-exist in a singe chip and
> + shares a common gpio to bring chip out of reset.
> + - max-speed: operating speed of the chip.
> +
> +Examples:
>
> serial@7570000 {
> label = "BT-UART";
> @@ -28,3 +40,18 @@ serial@7570000 {
> clocks = <&divclk4>;
> };
> };
> +
> +serial@898000 {
> + label = "BT-UART";
> + status = "okay";
> +
> + bluetooth: bt_wcn3990 {
Reverse these. The node name should be "bluetooth".
> + compatible = "qcom,wcn3990-bt";
> + vddio-supply = <&pm8998_s3>;
> + vddxtal-supply = <&pm8998_s5>;
> + vddcore-supply = <&pm8998_l7>;
> + vddpa-supply = <&pm8998_l17>;
> + vddldo-supply = <&pm8998_l25>;
> + max-speed = <3200000>;
> + };
> +};
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
