Re: [PATCH v2 4/5] thermal: tsens: Add support for SDM845

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Amit,

On Tue, Jun 12, 2018 at 4:24 PM, Amit Kucheria <amit.kucheria@xxxxxxxxxx> wrote:
> SDM845 uses the TSENS v2 IP block
>
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.txt |  1 +
>  drivers/thermal/qcom/Makefile                            |  2 +-
>  drivers/thermal/qcom/tsens-sdm845.c                      | 15 +++++++++++++++
>  drivers/thermal/qcom/tsens.c                             |  3 +++
>  drivers/thermal/qcom/tsens.h                             |  5 ++++-
>  5 files changed, 24 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/thermal/qcom/tsens-sdm845.c
>
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> index 292ed89..8652499 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> @@ -5,6 +5,7 @@ Required properties:
>   - "qcom,msm8916-tsens" : For 8916 Family of SoCs
>   - "qcom,msm8974-tsens" : For 8974 Family of SoCs
>   - "qcom,msm8996-tsens" : For 8996 Family of SoCs
> + - "qcom,sdm845-tsens"  : For SDM845 Family of SoCs
>
>  - reg: Address range of the thermal registers
>  - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
> diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
> index 2cc2193..dc9f169 100644
> --- a/drivers/thermal/qcom/Makefile
> +++ b/drivers/thermal/qcom/Makefile
> @@ -1,2 +1,2 @@
>  obj-$(CONFIG_QCOM_TSENS)       += qcom_tsens.o
> -qcom_tsens-y                   += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o
> +qcom_tsens-y                   += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o tsens-sdm845.o
> diff --git a/drivers/thermal/qcom/tsens-sdm845.c b/drivers/thermal/qcom/tsens-sdm845.c
> new file mode 100644
> index 0000000..a647265
> --- /dev/null
> +++ b/drivers/thermal/qcom/tsens-sdm845.c
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018, Linaro Limited
> + */
> +
> +#include "tsens.h"
> +
> +static const struct tsens_ops ops_sdm845 = {
> +       .init           = init_common,
> +       .get_temp       = get_temp_tsens_v2,
> +};
> +
> +const struct tsens_data data_sdm845 = {

Just a minor nit. 'static' here?

> +       .ops            = &ops_sdm845,
> +};

[snip]

Thanks & Regards
Vivek


-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux