On Fri, May 25 2018 at 19:08 -0600, David Collins wrote:
Hello Rajendra,
On 05/25/2018 03:01 AM, Rajendra Nayak wrote:
+
+ to_active_sleep(pd, pd->corner, &this_corner, &this_sleep_corner);
+
+ if (peer && peer->enabled)
+ to_active_sleep(peer, peer->corner, &peer_corner,
+ &peer_sleep_corner);
+
+ active_corner = max(this_corner, peer_corner);
+
+ ret = rpmhpd_send_corner(pd, RPMH_ACTIVE_ONLY_STATE, active_corner);
+ if (ret)
+ return ret;
+
+ sleep_corner = max(this_sleep_corner, peer_sleep_corner);
+
+ return rpmhpd_send_corner(pd, RPMH_SLEEP_STATE, sleep_corner);
+}
This aggregation function as well as the rpmhpd_send_corner() calls below
are not sufficient for RPMh. There are 3 states that must all be used:
RPMH_ACTIVE_ONLY_STATE, RPMH_WAKE_ONLY_STATE, and RPMH_SLEEP_STATE. The
naming is somewhat confusing as rpmhpd is defining a different concept of
active-only.
For power domains without active-only or peers, only
RPMH_ACTIVE_ONLY_STATE should be used. This instructs RPMh to issue the
request immediately.
For power domains with active-only, requests will need to be made for all
three. active_corner would be sent for both RPMH_ACTIVE_ONLY_STATE (so
that the request takes effect immediately) and RPMH_WAKE_ONLY_STATE (so
that the request is inserted into the wake TCS). sleep_corner would be
sent for RPMH_SLEEP_STATE (so that the request is inserted into the sleep
TCS).
You can see how this is handled in the RPMh clock driver in patch [3].
You may be able to get away with using only RPMH_SLEEP_STATE and
RPMH_ACTIVE_ONLY_STATE assuming that you issue the RPMH_SLEEP_STATE
request first due to the rpmh driver caching behavior added in the
cache_rpm_request() function in [4]. However, could you please confirm
with Lina that this usage will continue to work in the future? I'm not
sure what guarantees are made at the rpmh API level.
We expect to cache all active values into wake if there was a sleep
value already defined. Expect to continue this behavior in the future
as well. But it would be safer for you to send sleep and wake votes in
addition to active votes. It shouldn't add too much of an overhead.
-- Lina
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
