Re: [PATCH v2 5/5] thermal: tsens: Check if we have valid data before reading

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue 12 Jun 03:54 PDT 2018, Amit Kucheria wrote:

> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> ---
>  drivers/thermal/qcom/tsens-common.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
> index 961ace4..f510e61 100644
> --- a/drivers/thermal/qcom/tsens-common.c
> +++ b/drivers/thermal/qcom/tsens-common.c
> @@ -114,6 +114,9 @@ int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
>  #define STATUS_VALID_BIT	BIT(21)
>  #define CODE_SIGN_BIT		BIT(11)
>  
> +#define TRDY_OFFSET     	0xe4
> +#define TRDY_READY_BIT  	BIT(0)
> +
>  int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp)
>  {
>  	struct tsens_sensor *s = &tmdev->sensor[id];
> @@ -121,6 +124,12 @@ int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp)
>  	unsigned int sensor_addr;
>  	int last_temp = 0, last_temp2 = 0, last_temp3 = 0, ret;
>  
> +	ret = regmap_read(tmdev->map, TRDY_OFFSET, &code);
> +	if (ret)
> +		return ret;
> +	if (code & TRDY_READY_BIT)
> +		return -ENODATA;
> +
>  	sensor_addr = STATUS_OFFSET + s->hw_id * 4;
>  	ret = regmap_read(tmdev->map, sensor_addr, &code);
>  	if (ret)
> -- 
> 2.7.4
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux