Re: [PATCH v3 0/7] Add powerdomain driver for corners on msm8996/sdm845

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12 June 2018 at 06:40, Rajendra Nayak <rnayak@xxxxxxxxxxxxxx> wrote:
> Changes in v3:
> * Bindings split into seperate patches
> * Bindings updated to remove duplicate OPP table phandles
> * DT headers defining macros for Power domain indexes and OPP levels
> * Optimisations to use rpmh_write_async() whereever applicable
> * Fixed up handling of ACTIVE_ONLY/WAKE_ONLY/SLEEP voting for RPMh
> * Fixed the vlvl to hlvl conversions in set_performance
> * Other minor fixes based on review of v2
> * TODO: This series does not handle the case where all VDD_MX votes
> should be higher than VDD_CX from APPs, as pointed out
> by David Collins in v2. This needs support at genpd to propogate performance
> state up the parents, if we model these as Parent/Child to handle the
> interdependency.
>
> Changes in v2:
> * added a powerdomain driver for sdm845 which supports communicating to RPMh
> * dropped the changes to sdhc driver to move over to using OPP
> as there is active discussion on using OPP as the interface vs
> handling all of it in clock drivers
> * Other minor binding updates based on review of v1
>
> With performance state support for genpd/OPP merged, this is an effort
> to model a powerdomain driver to communicate corner/level
> values for qualcomm platforms to RPM (Remote Power Manager) and RPMh.
>
> Rajendra Nayak (7):
>   dt-bindings: power: Add qcom rpm power domain driver bindings
>   soc: qcom: rpmpd: Add a Power domain driver to model corners
>   soc: qcom: rpmpd: Add support for get/set performance state
>   arm64: dts: msm8996: Add rpmpd device node
>   dt-bindings: power: Add qcom rpmh power domain driver bindings
>   soc: qcom: Add RPMh Power domain driver
>   soc: qcom: rpmpd/rpmhpd: Add a max vote on all corners at init
>
>  .../devicetree/bindings/power/qcom,rpmhpd.txt |  65 +++
>  .../devicetree/bindings/power/qcom,rpmpd.txt  |  49 ++
>  arch/arm64/boot/dts/qcom/msm8996.dtsi         |  34 ++
>  drivers/soc/qcom/Kconfig                      |  18 +
>  drivers/soc/qcom/Makefile                     |   2 +
>  drivers/soc/qcom/rpmhpd.c                     | 437 ++++++++++++++++++
>  drivers/soc/qcom/rpmpd.c                      | 356 ++++++++++++++
>  include/dt-bindings/power/qcom-rpmhpd.h       |  31 ++
>  include/dt-bindings/power/qcom-rpmpd.h        |  16 +
>  9 files changed, 1008 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/qcom,rpmhpd.txt
>  create mode 100644 Documentation/devicetree/bindings/power/qcom,rpmpd.txt
>  create mode 100644 drivers/soc/qcom/rpmhpd.c
>  create mode 100644 drivers/soc/qcom/rpmpd.c
>  create mode 100644 include/dt-bindings/power/qcom-rpmhpd.h
>  create mode 100644 include/dt-bindings/power/qcom-rpmpd.h
>
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>

For the series:

Reviewed-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>

Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux