On Thu 07 Jun 13:46 PDT 2018, Douglas Anderson wrote: > This adds nodes to SDM845-dtsi for all the I2C ports, all the SPI > ports, and UART9. Note that I2C / SPI / UART are a bit strange on > sdm845 because each "serial engine" has 4 pins associated with it and > depending on which firmware has been loaded into the serial engine > (loaded by the BIOS) the serial engine can behave like an I2C port, a > SPI port, or a UART. As per the landed bindings that means that we > need to create one node for each possible mode that the port could be > in. With 16 serial engines that means 16 x 3 = 48 nodes. > > We get away with only creating 33 nodes for now because it seems very > likely that SDM845-based boards will actually all use the same UART > (UART 9) for debug purposes. While another UART could be used for > something like Bluetooth communication we can cross that path when we > come to it. Some documentation that I saw implied that using a UART > for "high speed" communications actually needs yet another different > serial engine firmware anyway. > > Note that quick measurements adding all these nodes adds ~10k of extra > space per dtb that they're included with. If this becomes a problem > we may need to think of a different way to structure this so that > boards only get the nodes they need (or figure out how to get dtc to > strip 'disabled' nodes). For now it seems OK. > > These nodes were programmatically generated with a fairly dumb python > script. See http://crosreview.com/1091631 for the source. > > Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Regards, Bjorn > --- > > arch/arm64/boot/dts/qcom/sdm845.dtsi | 1013 ++++++++++++++++++++++++++ > 1 file changed, 1013 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index cdaabeb3c995..2dc5c7dcc9aa 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -5,6 +5,7 @@ > * Copyright (c) 2018, The Linux Foundation. All rights reserved. > */ > > +#include <dt-bindings/clock/qcom,gcc-sdm845.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > > / { > @@ -13,6 +14,41 @@ > #address-cells = <2>; > #size-cells = <2>; > > + aliases { > + i2c0 = &i2c0; > + i2c1 = &i2c1; > + i2c2 = &i2c2; > + i2c3 = &i2c3; > + i2c4 = &i2c4; > + i2c5 = &i2c5; > + i2c6 = &i2c6; > + i2c7 = &i2c7; > + i2c8 = &i2c8; > + i2c9 = &i2c9; > + i2c10 = &i2c10; > + i2c11 = &i2c11; > + i2c12 = &i2c12; > + i2c13 = &i2c13; > + i2c14 = &i2c14; > + i2c15 = &i2c15; > + spi0 = &spi0; > + spi1 = &spi1; > + spi2 = &spi2; > + spi3 = &spi3; > + spi4 = &spi4; > + spi5 = &spi5; > + spi6 = &spi6; > + spi7 = &spi7; > + spi8 = &spi8; > + spi9 = &spi9; > + spi10 = &spi10; > + spi11 = &spi11; > + spi12 = &spi12; > + spi13 = &spi13; > + spi14 = &spi14; > + spi15 = &spi15; > + }; > + > chosen { }; > > memory@80000000 { > @@ -206,6 +242,489 @@ > #power-domain-cells = <1>; > }; > > + qupv3_id_0: geniqup@8c0000 { > + compatible = "qcom,geni-se-qup"; > + reg = <0x8c0000 0x6000>; > + clock-names = "m-ahb", "s-ahb"; > + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, > + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + i2c0: i2c@880000 { > + compatible = "qcom,geni-i2c"; > + reg = <0x880000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_i2c0_default>; > + pinctrl-1 = <&qup_i2c0_sleep>; > + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + spi0: spi@880000 { > + compatible = "qcom,geni-spi"; > + reg = <0x880000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_spi0_default>; > + pinctrl-1 = <&qup_spi0_sleep>; > + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c1: i2c@884000 { > + compatible = "qcom,geni-i2c"; > + reg = <0x884000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_i2c1_default>; > + pinctrl-1 = <&qup_i2c1_sleep>; > + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + spi1: spi@884000 { > + compatible = "qcom,geni-spi"; > + reg = <0x884000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_spi1_default>; > + pinctrl-1 = <&qup_spi1_sleep>; > + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c2: i2c@888000 { > + compatible = "qcom,geni-i2c"; > + reg = <0x888000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_i2c2_default>; > + pinctrl-1 = <&qup_i2c2_sleep>; > + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + spi2: spi@888000 { > + compatible = "qcom,geni-spi"; > + reg = <0x888000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_spi2_default>; > + pinctrl-1 = <&qup_spi2_sleep>; > + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c3: i2c@88c000 { > + compatible = "qcom,geni-i2c"; > + reg = <0x88c000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_i2c3_default>; > + pinctrl-1 = <&qup_i2c3_sleep>; > + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + spi3: spi@88c000 { > + compatible = "qcom,geni-spi"; > + reg = <0x88c000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_spi3_default>; > + pinctrl-1 = <&qup_spi3_sleep>; > + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c4: i2c@890000 { > + compatible = "qcom,geni-i2c"; > + reg = <0x890000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_i2c4_default>; > + pinctrl-1 = <&qup_i2c4_sleep>; > + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + spi4: spi@890000 { > + compatible = "qcom,geni-spi"; > + reg = <0x890000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_spi4_default>; > + pinctrl-1 = <&qup_spi4_sleep>; > + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c5: i2c@894000 { > + compatible = "qcom,geni-i2c"; > + reg = <0x894000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_i2c5_default>; > + pinctrl-1 = <&qup_i2c5_sleep>; > + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + spi5: spi@894000 { > + compatible = "qcom,geni-spi"; > + reg = <0x894000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_spi5_default>; > + pinctrl-1 = <&qup_spi5_sleep>; > + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c6: i2c@898000 { > + compatible = "qcom,geni-i2c"; > + reg = <0x898000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_i2c6_default>; > + pinctrl-1 = <&qup_i2c6_sleep>; > + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + spi6: spi@898000 { > + compatible = "qcom,geni-spi"; > + reg = <0x898000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_spi6_default>; > + pinctrl-1 = <&qup_spi6_sleep>; > + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c7: i2c@89c000 { > + compatible = "qcom,geni-i2c"; > + reg = <0x89c000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_i2c7_default>; > + pinctrl-1 = <&qup_i2c7_sleep>; > + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + spi7: spi@89c000 { > + compatible = "qcom,geni-spi"; > + reg = <0x89c000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_spi7_default>; > + pinctrl-1 = <&qup_spi7_sleep>; > + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + }; > + > + qupv3_id_1: geniqup@ac0000 { > + compatible = "qcom,geni-se-qup"; > + reg = <0xac0000 0x6000>; > + clock-names = "m-ahb", "s-ahb"; > + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, > + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + status = "disabled"; > + > + i2c8: i2c@a80000 { > + compatible = "qcom,geni-i2c"; > + reg = <0xa80000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_i2c8_default>; > + pinctrl-1 = <&qup_i2c8_sleep>; > + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + spi8: spi@a80000 { > + compatible = "qcom,geni-spi"; > + reg = <0xa80000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_spi8_default>; > + pinctrl-1 = <&qup_spi8_sleep>; > + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c9: i2c@a84000 { > + compatible = "qcom,geni-i2c"; > + reg = <0xa84000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_i2c9_default>; > + pinctrl-1 = <&qup_i2c9_sleep>; > + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + spi9: spi@a84000 { > + compatible = "qcom,geni-spi"; > + reg = <0xa84000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_spi9_default>; > + pinctrl-1 = <&qup_spi9_sleep>; > + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + uart9: serial@a84000 { > + compatible = "qcom,geni-debug-uart"; > + reg = <0xa84000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_uart9_default>; > + pinctrl-1 = <&qup_uart9_sleep>; > + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + i2c10: i2c@a88000 { > + compatible = "qcom,geni-i2c"; > + reg = <0xa88000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_i2c10_default>; > + pinctrl-1 = <&qup_i2c10_sleep>; > + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + spi10: spi@a88000 { > + compatible = "qcom,geni-spi"; > + reg = <0xa88000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_spi10_default>; > + pinctrl-1 = <&qup_spi10_sleep>; > + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c11: i2c@a8c000 { > + compatible = "qcom,geni-i2c"; > + reg = <0xa8c000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_i2c11_default>; > + pinctrl-1 = <&qup_i2c11_sleep>; > + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + spi11: spi@a8c000 { > + compatible = "qcom,geni-spi"; > + reg = <0xa8c000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_spi11_default>; > + pinctrl-1 = <&qup_spi11_sleep>; > + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c12: i2c@a90000 { > + compatible = "qcom,geni-i2c"; > + reg = <0xa90000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_i2c12_default>; > + pinctrl-1 = <&qup_i2c12_sleep>; > + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + spi12: spi@a90000 { > + compatible = "qcom,geni-spi"; > + reg = <0xa90000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_spi12_default>; > + pinctrl-1 = <&qup_spi12_sleep>; > + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c13: i2c@a94000 { > + compatible = "qcom,geni-i2c"; > + reg = <0xa94000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_i2c13_default>; > + pinctrl-1 = <&qup_i2c13_sleep>; > + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + spi13: spi@a94000 { > + compatible = "qcom,geni-spi"; > + reg = <0xa94000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_spi13_default>; > + pinctrl-1 = <&qup_spi13_sleep>; > + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c14: i2c@a98000 { > + compatible = "qcom,geni-i2c"; > + reg = <0xa98000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_i2c14_default>; > + pinctrl-1 = <&qup_i2c14_sleep>; > + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + spi14: spi@a98000 { > + compatible = "qcom,geni-spi"; > + reg = <0xa98000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_spi14_default>; > + pinctrl-1 = <&qup_spi14_sleep>; > + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c15: i2c@a9c000 { > + compatible = "qcom,geni-i2c"; > + reg = <0xa9c000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_i2c15_default>; > + pinctrl-1 = <&qup_i2c15_sleep>; > + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + spi15: spi@a9c000 { > + compatible = "qcom,geni-spi"; > + reg = <0xa9c000 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qup_spi15_default>; > + pinctrl-1 = <&qup_spi15_sleep>; > + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + }; > + > tcsr_mutex_regs: syscon@1f40000 { > compatible = "syscon"; > reg = <0x1f40000 0x40000>; > @@ -219,6 +738,500 @@ > #gpio-cells = <2>; > interrupt-controller; > #interrupt-cells = <2>; > + > + qup_i2c0_default: qup-i2c0-default { > + pinmux { > + pins = "gpio0", "gpio1"; > + function = "qup0"; > + }; > + }; > + > + qup_i2c0_sleep: qup-i2c0-sleep { > + pinmux { > + pins = "gpio0", "gpio1"; > + function = "gpio"; > + }; > + }; > + > + qup_i2c1_default: qup-i2c1-default { > + pinmux { > + pins = "gpio17", "gpio18"; > + function = "qup1"; > + }; > + }; > + > + qup_i2c1_sleep: qup-i2c1-sleep { > + pinmux { > + pins = "gpio17", "gpio18"; > + function = "gpio"; > + }; > + }; > + > + qup_i2c2_default: qup-i2c2-default { > + pinmux { > + pins = "gpio27", "gpio28"; > + function = "qup2"; > + }; > + }; > + > + qup_i2c2_sleep: qup-i2c2-sleep { > + pinmux { > + pins = "gpio27", "gpio28"; > + function = "gpio"; > + }; > + }; > + > + qup_i2c3_default: qup-i2c3-default { > + pinmux { > + pins = "gpio41", "gpio42"; > + function = "qup3"; > + }; > + }; > + > + qup_i2c3_sleep: qup-i2c3-sleep { > + pinmux { > + pins = "gpio41", "gpio42"; > + function = "gpio"; > + }; > + }; > + > + qup_i2c4_default: qup-i2c4-default { > + pinmux { > + pins = "gpio89", "gpio90"; > + function = "qup4"; > + }; > + }; > + > + qup_i2c4_sleep: qup-i2c4-sleep { > + pinmux { > + pins = "gpio89", "gpio90"; > + function = "gpio"; > + }; > + }; > + > + qup_i2c5_default: qup-i2c5-default { > + pinmux { > + pins = "gpio85", "gpio86"; > + function = "qup5"; > + }; > + }; > + > + qup_i2c5_sleep: qup-i2c5-sleep { > + pinmux { > + pins = "gpio85", "gpio86"; > + function = "gpio"; > + }; > + }; > + > + qup_i2c6_default: qup-i2c6-default { > + pinmux { > + pins = "gpio45", "gpio46"; > + function = "qup6"; > + }; > + }; > + > + qup_i2c6_sleep: qup-i2c6-sleep { > + pinmux { > + pins = "gpio45", "gpio46"; > + function = "gpio"; > + }; > + }; > + > + qup_i2c7_default: qup-i2c7-default { > + pinmux { > + pins = "gpio93", "gpio94"; > + function = "qup7"; > + }; > + }; > + > + qup_i2c7_sleep: qup-i2c7-sleep { > + pinmux { > + pins = "gpio93", "gpio94"; > + function = "gpio"; > + }; > + }; > + > + qup_i2c8_default: qup-i2c8-default { > + pinmux { > + pins = "gpio65", "gpio66"; > + function = "qup8"; > + }; > + }; > + > + qup_i2c8_sleep: qup-i2c8-sleep { > + pinmux { > + pins = "gpio65", "gpio66"; > + function = "gpio"; > + }; > + }; > + > + qup_i2c9_default: qup-i2c9-default { > + pinmux { > + pins = "gpio6", "gpio7"; > + function = "qup9"; > + }; > + }; > + > + qup_i2c9_sleep: qup-i2c9-sleep { > + pinmux { > + pins = "gpio6", "gpio7"; > + function = "gpio"; > + }; > + }; > + > + qup_i2c10_default: qup-i2c10-default { > + pinmux { > + pins = "gpio55", "gpio56"; > + function = "qup10"; > + }; > + }; > + > + qup_i2c10_sleep: qup-i2c10-sleep { > + pinmux { > + pins = "gpio55", "gpio56"; > + function = "gpio"; > + }; > + }; > + > + qup_i2c11_default: qup-i2c11-default { > + pinmux { > + pins = "gpio31", "gpio32"; > + function = "qup11"; > + }; > + }; > + > + qup_i2c11_sleep: qup-i2c11-sleep { > + pinmux { > + pins = "gpio31", "gpio32"; > + function = "gpio"; > + }; > + }; > + > + qup_i2c12_default: qup-i2c12-default { > + pinmux { > + pins = "gpio49", "gpio50"; > + function = "qup12"; > + }; > + }; > + > + qup_i2c12_sleep: qup-i2c12-sleep { > + pinmux { > + pins = "gpio49", "gpio50"; > + function = "gpio"; > + }; > + }; > + > + qup_i2c13_default: qup-i2c13-default { > + pinmux { > + pins = "gpio105", "gpio106"; > + function = "qup13"; > + }; > + }; > + > + qup_i2c13_sleep: qup-i2c13-sleep { > + pinmux { > + pins = "gpio105", "gpio106"; > + function = "gpio"; > + }; > + }; > + > + qup_i2c14_default: qup-i2c14-default { > + pinmux { > + pins = "gpio33", "gpio34"; > + function = "qup14"; > + }; > + }; > + > + qup_i2c14_sleep: qup-i2c14-sleep { > + pinmux { > + pins = "gpio33", "gpio34"; > + function = "gpio"; > + }; > + }; > + > + qup_i2c15_default: qup-i2c15-default { > + pinmux { > + pins = "gpio81", "gpio82"; > + function = "qup15"; > + }; > + }; > + > + qup_i2c15_sleep: qup-i2c15-sleep { > + pinmux { > + pins = "gpio81", "gpio82"; > + function = "gpio"; > + }; > + }; > + > + qup_spi0_default: qup-spi0-default { > + pinmux { > + pins = "gpio0", "gpio1", > + "gpio2", "gpio3"; > + function = "qup0"; > + }; > + }; > + > + qup_spi0_sleep: qup-spi0-sleep { > + pinmux { > + pins = "gpio0", "gpio1", > + "gpio2", "gpio3"; > + function = "gpio"; > + }; > + }; > + > + qup_spi1_default: qup-spi1-default { > + pinmux { > + pins = "gpio17", "gpio18", > + "gpio19", "gpio20"; > + function = "qup1"; > + }; > + }; > + > + qup_spi1_sleep: qup-spi1-sleep { > + pinmux { > + pins = "gpio17", "gpio18", > + "gpio19", "gpio20"; > + function = "gpio"; > + }; > + }; > + > + qup_spi2_default: qup-spi2-default { > + pinmux { > + pins = "gpio27", "gpio28", > + "gpio29", "gpio30"; > + function = "qup2"; > + }; > + }; > + > + qup_spi2_sleep: qup-spi2-sleep { > + pinmux { > + pins = "gpio27", "gpio28", > + "gpio29", "gpio30"; > + function = "gpio"; > + }; > + }; > + > + qup_spi3_default: qup-spi3-default { > + pinmux { > + pins = "gpio41", "gpio42", > + "gpio43", "gpio44"; > + function = "qup3"; > + }; > + }; > + > + qup_spi3_sleep: qup-spi3-sleep { > + pinmux { > + pins = "gpio41", "gpio42", > + "gpio43", "gpio44"; > + function = "gpio"; > + }; > + }; > + > + qup_spi4_default: qup-spi4-default { > + pinmux { > + pins = "gpio89", "gpio90", > + "gpio91", "gpio92"; > + function = "qup4"; > + }; > + }; > + > + qup_spi4_sleep: qup-spi4-sleep { > + pinmux { > + pins = "gpio89", "gpio90", > + "gpio91", "gpio92"; > + function = "gpio"; > + }; > + }; > + > + qup_spi5_default: qup-spi5-default { > + pinmux { > + pins = "gpio85", "gpio86", > + "gpio87", "gpio88"; > + function = "qup5"; > + }; > + }; > + > + qup_spi5_sleep: qup-spi5-sleep { > + pinmux { > + pins = "gpio85", "gpio86", > + "gpio87", "gpio88"; > + function = "gpio"; > + }; > + }; > + > + qup_spi6_default: qup-spi6-default { > + pinmux { > + pins = "gpio45", "gpio46", > + "gpio47", "gpio48"; > + function = "qup6"; > + }; > + }; > + > + qup_spi6_sleep: qup-spi6-sleep { > + pinmux { > + pins = "gpio45", "gpio46", > + "gpio47", "gpio48"; > + function = "gpio"; > + }; > + }; > + > + qup_spi7_default: qup-spi7-default { > + pinmux { > + pins = "gpio93", "gpio94", > + "gpio95", "gpio96"; > + function = "qup7"; > + }; > + }; > + > + qup_spi7_sleep: qup-spi7-sleep { > + pinmux { > + pins = "gpio93", "gpio94", > + "gpio95", "gpio96"; > + function = "gpio"; > + }; > + }; > + > + qup_spi8_default: qup-spi8-default { > + pinmux { > + pins = "gpio65", "gpio66", > + "gpio67", "gpio68"; > + function = "qup8"; > + }; > + }; > + > + qup_spi8_sleep: qup-spi8-sleep { > + pinmux { > + pins = "gpio65", "gpio66", > + "gpio67", "gpio68"; > + function = "gpio"; > + }; > + }; > + > + qup_spi9_default: qup-spi9-default { > + pinmux { > + pins = "gpio6", "gpio7", > + "gpio4", "gpio5"; > + function = "qup9"; > + }; > + }; > + > + qup_spi9_sleep: qup-spi9-sleep { > + pinmux { > + pins = "gpio6", "gpio7", > + "gpio4", "gpio5"; > + function = "gpio"; > + }; > + }; > + > + qup_spi10_default: qup-spi10-default { > + pinmux { > + pins = "gpio55", "gpio56", > + "gpio53", "gpio54"; > + function = "qup10"; > + }; > + }; > + > + qup_spi10_sleep: qup-spi10-sleep { > + pinmux { > + pins = "gpio55", "gpio56", > + "gpio53", "gpio54"; > + function = "gpio"; > + }; > + }; > + > + qup_spi11_default: qup-spi11-default { > + pinmux { > + pins = "gpio31", "gpio32", > + "gpio33", "gpio34"; > + function = "qup11"; > + }; > + }; > + > + qup_spi11_sleep: qup-spi11-sleep { > + pinmux { > + pins = "gpio31", "gpio32", > + "gpio33", "gpio34"; > + function = "gpio"; > + }; > + }; > + > + qup_spi12_default: qup-spi12-default { > + pinmux { > + pins = "gpio49", "gpio50", > + "gpio51", "gpio52"; > + function = "qup12"; > + }; > + }; > + > + qup_spi12_sleep: qup-spi12-sleep { > + pinmux { > + pins = "gpio49", "gpio50", > + "gpio51", "gpio52"; > + function = "gpio"; > + }; > + }; > + > + qup_spi13_default: qup-spi13-default { > + pinmux { > + pins = "gpio105", "gpio106", > + "gpio107", "gpio108"; > + function = "qup13"; > + }; > + }; > + > + qup_spi13_sleep: qup-spi13-sleep { > + pinmux { > + pins = "gpio105", "gpio106", > + "gpio107", "gpio108"; > + function = "gpio"; > + }; > + }; > + > + qup_spi14_default: qup-spi14-default { > + pinmux { > + pins = "gpio33", "gpio34", > + "gpio31", "gpio32"; > + function = "qup14"; > + }; > + }; > + > + qup_spi14_sleep: qup-spi14-sleep { > + pinmux { > + pins = "gpio33", "gpio34", > + "gpio31", "gpio32"; > + function = "gpio"; > + }; > + }; > + > + qup_spi15_default: qup-spi15-default { > + pinmux { > + pins = "gpio81", "gpio82", > + "gpio83", "gpio84"; > + function = "qup15"; > + }; > + }; > + > + qup_spi15_sleep: qup-spi15-sleep { > + pinmux { > + pins = "gpio81", "gpio82", > + "gpio83", "gpio84"; > + function = "gpio"; > + }; > + }; > + > + qup_uart9_default: qup-uart9-default { > + pinmux { > + pins = "gpio4", "gpio5"; > + function = "qup9"; > + }; > + }; > + > + qup_uart9_sleep: qup-uart9-sleep { > + pinmux { > + pins = "gpio4", "gpio5"; > + function = "gpio"; > + }; > + }; > }; > > spmi_bus: spmi@c440000 { > -- > 2.17.1.1185.g55be947832-goog > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
