[PATCH 0/4] Add QCOM graphics clock controller driver for SDM845

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch series adds support for graphics clock controller for SDM845.
Below is the brief description for each change:

1. For some of the GDSCs, there is requirement to enable/disable the
   few clocks before turning on/off the gdsc power domain. This patch
   will add support to enable/disable the clock associated with the
   gdsc along with power domain on/off callbacks.

2. To turn on the gpu_gx_gdsc, there is a hardware requirement to
   turn on the root clock (GFX3D RCG) first which would be the turn
   on signal for the gdsc along with the SW_COLLAPSE. As per the
   current implementation of clk_rcg2_shared_ops, it clears the
   root_enable bit in the enable() and set_rate() clock ops. But due
   to the above said requirement for GFX3D shared RCG, root_enable bit
   would be already set by gdsc driver and rcg2_shared_ops should not clear
   the root unless the disable() is called.

   This patch add support for the same by reusing the existing
   clk_rcg2_shared_ops and deriving "clk_rcg2_gfx3d_ops" clk_ops
   for GFX3D clock to take care of the root set/clear requirement.

3. Add device tree bindings for graphics clock controller for SDM845.

4. Add graphics clock controller (GPUCC) driver for SDM845.

Amit Nischal (4):
  clk: qcom: gdsc: Add support to enable/disable the clocks with GDSC
  clk: qcom: Add clk_rcg2_gfx3d_ops for SDM845
  dt-bindings: clock: Introduce QCOM Graphics clock bindings
  clk: qcom: Add graphics clock controller driver for SDM845

 .../devicetree/bindings/clock/qcom,gpucc.txt       |  18 +
 drivers/clk/qcom/Kconfig                           |   9 +
 drivers/clk/qcom/Makefile                          |   1 +
 drivers/clk/qcom/clk-rcg.h                         |   1 +
 drivers/clk/qcom/clk-rcg2.c                        |  78 +++-
 drivers/clk/qcom/gdsc.c                            |  44 ++
 drivers/clk/qcom/gdsc.h                            |   5 +
 drivers/clk/qcom/gpucc-sdm845.c                    | 441 +++++++++++++++++++++
 include/dt-bindings/clock/qcom,gpucc-sdm845.h      |  38 ++
 9 files changed, 614 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc.txt
 create mode 100644 drivers/clk/qcom/gpucc-sdm845.c
 create mode 100644 include/dt-bindings/clock/qcom,gpucc-sdm845.h

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux