On Wed, May 23, 2018 at 12:31:00PM -0700, Jeykumar Sankaran wrote:
> Remove dpu crtc custom properties and its handlers.
>
> Signed-off-by: Jeykumar Sankaran <jsanka@xxxxxxxxxxxxxx>
Reviewed-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/msm/Makefile | 1 -
> drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 28 -
> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 856 +-------------------------
> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h | 27 +-
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 12 -
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ds.c | 149 -----
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ds.h | 111 ----
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c | 67 --
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h | 14 -
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 16 -
> drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 71 +--
> drivers/gpu/drm/msm/msm_drv.h | 15 -
> 12 files changed, 11 insertions(+), 1356 deletions(-)
> delete mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ds.c
> delete mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ds.h
>
> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
> index 7bc3921..d289503 100644
> --- a/drivers/gpu/drm/msm/Makefile
> +++ b/drivers/gpu/drm/msm/Makefile
> @@ -57,7 +57,6 @@ msm-y := \
> disp/dpu1/dpu_hw_catalog.o \
> disp/dpu1/dpu_hw_cdm.o \
> disp/dpu1/dpu_hw_ctl.o \
> - disp/dpu1/dpu_hw_ds.o \
> disp/dpu1/dpu_hw_interrupts.o \
> disp/dpu1/dpu_hw_intf.o \
> disp/dpu1/dpu_hw_lm.o \
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> index 981f77f..c4820de 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> @@ -102,34 +102,6 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
> dpu_cstate = to_dpu_crtc_state(state);
> memset(perf, 0, sizeof(struct dpu_core_perf_params));
>
> - perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MNOC] =
> - dpu_crtc_get_property(dpu_cstate, CRTC_PROP_CORE_AB);
> - perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_MNOC] =
> - dpu_crtc_get_property(dpu_cstate, CRTC_PROP_CORE_IB);
> -
> - if (dpu_cstate->bw_split_vote) {
> - perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_LLCC] =
> - dpu_crtc_get_property(dpu_cstate, CRTC_PROP_LLCC_AB);
> - perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_LLCC] =
> - dpu_crtc_get_property(dpu_cstate, CRTC_PROP_LLCC_IB);
> - perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_EBI] =
> - dpu_crtc_get_property(dpu_cstate, CRTC_PROP_DRAM_AB);
> - perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_EBI] =
> - dpu_crtc_get_property(dpu_cstate, CRTC_PROP_DRAM_IB);
> - } else {
> - perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_LLCC] =
> - dpu_crtc_get_property(dpu_cstate, CRTC_PROP_CORE_AB);
> - perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_LLCC] =
> - dpu_crtc_get_property(dpu_cstate, CRTC_PROP_CORE_IB);
> - perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_EBI] =
> - dpu_crtc_get_property(dpu_cstate, CRTC_PROP_CORE_AB);
> - perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_EBI] =
> - dpu_crtc_get_property(dpu_cstate, CRTC_PROP_CORE_IB);
> - }
> -
> - perf->core_clk_rate =
> - dpu_crtc_get_property(dpu_cstate, CRTC_PROP_CORE_CLK);
> -
> if (!dpu_cstate->bw_control) {
> for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
> perf->bw_ctl[i] = kms->catalog->perf.max_bw_high *
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index a0b702f..b0a3a30 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -570,18 +570,6 @@ static void _dpu_crtc_deinit_events(struct dpu_crtc *dpu_crtc)
> return;
> }
>
> -/**
> - * dpu_crtc_destroy_dest_scaler - free memory allocated for scaler lut
> - * @dpu_crtc: Pointer to dpu crtc
> - */
> -static void _dpu_crtc_destroy_dest_scaler(struct dpu_crtc *dpu_crtc)
> -{
> - if (!dpu_crtc)
> - return;
> -
> - kfree(dpu_crtc->scl3_lut_cfg);
> -}
> -
> static void dpu_crtc_destroy(struct drm_crtc *crtc)
> {
> struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> @@ -594,7 +582,6 @@ static void dpu_crtc_destroy(struct drm_crtc *crtc)
> if (dpu_crtc->blob_info)
> drm_property_blob_put(dpu_crtc->blob_info);
> msm_property_destroy(&dpu_crtc->property_info);
> - _dpu_crtc_destroy_dest_scaler(dpu_crtc);
>
> _dpu_crtc_deinit_events(dpu_crtc);
>
> @@ -679,71 +666,6 @@ static void _dpu_crtc_setup_blend_cfg(struct dpu_crtc_mixer *mixer,
> format->alpha_enable, fg_alpha, bg_alpha, blend_op);
> }
>
> -static void _dpu_crtc_setup_dim_layer_cfg(struct drm_crtc *crtc,
> - struct dpu_crtc *dpu_crtc, struct dpu_crtc_mixer *mixer,
> - struct dpu_hw_dim_layer *dim_layer)
> -{
> - struct dpu_crtc_state *cstate;
> - struct dpu_hw_mixer *lm;
> - struct dpu_hw_dim_layer split_dim_layer;
> - int i;
> -
> - if (!dim_layer->rect.w || !dim_layer->rect.h) {
> - DPU_DEBUG("empty dim_layer\n");
> - return;
> - }
> -
> - cstate = to_dpu_crtc_state(crtc->state);
> -
> - DPU_DEBUG("dim_layer - flags:%d, stage:%d\n",
> - dim_layer->flags, dim_layer->stage);
> -
> - split_dim_layer.stage = dim_layer->stage;
> - split_dim_layer.color_fill = dim_layer->color_fill;
> -
> - /*
> - * traverse through the layer mixers attached to crtc and find the
> - * intersecting dim layer rect in each LM and program accordingly.
> - */
> - for (i = 0; i < dpu_crtc->num_mixers; i++) {
> - split_dim_layer.flags = dim_layer->flags;
> -
> - dpu_kms_rect_intersect(&cstate->lm_bounds[i], &dim_layer->rect,
> - &split_dim_layer.rect);
> - if (dpu_kms_rect_is_null(&split_dim_layer.rect)) {
> - /*
> - * no extra programming required for non-intersecting
> - * layer mixers with INCLUSIVE dim layer
> - */
> - if (split_dim_layer.flags & DPU_DRM_DIM_LAYER_INCLUSIVE)
> - continue;
> -
> - /*
> - * program the other non-intersecting layer mixers with
> - * INCLUSIVE dim layer of full size for uniformity
> - * with EXCLUSIVE dim layer config.
> - */
> - split_dim_layer.flags &= ~DPU_DRM_DIM_LAYER_EXCLUSIVE;
> - split_dim_layer.flags |= DPU_DRM_DIM_LAYER_INCLUSIVE;
> - memcpy(&split_dim_layer.rect, &cstate->lm_bounds[i],
> - sizeof(split_dim_layer.rect));
> -
> - } else {
> - split_dim_layer.rect.x =
> - split_dim_layer.rect.x -
> - cstate->lm_bounds[i].x;
> - }
> -
> - DPU_DEBUG("split_dim_layer - LM:%d, rect:{%d,%d,%d,%d}}\n",
> - i, split_dim_layer.rect.x, split_dim_layer.rect.y,
> - split_dim_layer.rect.w, split_dim_layer.rect.h);
> -
> - lm = mixer[i].hw_lm;
> - mixer[i].mixer_op_mode |= 1 << split_dim_layer.stage;
> - lm->ops.setup_dim_layer(lm, &split_dim_layer);
> - }
> -}
> -
> static void _dpu_crtc_program_lm_output_roi(struct drm_crtc *crtc)
> {
> struct dpu_crtc *dpu_crtc;
> @@ -787,7 +709,6 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
> u32 flush_mask;
> uint32_t stage_idx, lm_idx;
> int zpos_cnt[DPU_STAGE_MAX + 1] = { 0 };
> - int i;
> bool bg_alpha_enable = false;
>
> if (!dpu_crtc || !mixer) {
> @@ -863,13 +784,6 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
> }
> }
>
> - if (lm && lm->ops.setup_dim_layer) {
> - cstate = to_dpu_crtc_state(crtc->state);
> - for (i = 0; i < cstate->num_dim_layers; i++)
> - _dpu_crtc_setup_dim_layer_cfg(crtc, dpu_crtc,
> - mixer, &cstate->dim_layer[i]);
> - }
> -
> _dpu_crtc_program_lm_output_roi(crtc);
> }
>
> @@ -911,11 +825,6 @@ static void _dpu_crtc_blend_setup(struct drm_crtc *crtc)
> if (mixer[i].hw_ctl->ops.clear_all_blendstages)
> mixer[i].hw_ctl->ops.clear_all_blendstages(
> mixer[i].hw_ctl);
> -
> - /* clear dim_layer settings */
> - lm = mixer[i].hw_lm;
> - if (lm->ops.clear_dim_layer)
> - lm->ops.clear_dim_layer(lm);
> }
>
> /* initialize stage cfg */
> @@ -947,163 +856,6 @@ static void _dpu_crtc_blend_setup(struct drm_crtc *crtc)
> }
>
> /**
> - * _dpu_crtc_setup_scaler3_lut - Set up scaler lut
> - * LUTs are configured only once during boot
> - * @dpu_crtc: Pointer to dpu crtc
> - * @cstate: Pointer to dpu crtc state
> - */
> -static int _dpu_crtc_set_dest_scaler_lut(struct dpu_crtc *dpu_crtc,
> - struct dpu_crtc_state *cstate, uint32_t lut_idx)
> -{
> - struct dpu_hw_scaler3_lut_cfg *cfg;
> - u32 *lut_data = NULL;
> - size_t len = 0;
> - int ret = 0;
> -
> - if (!dpu_crtc || !cstate || !dpu_crtc->scl3_lut_cfg) {
> - DPU_ERROR("invalid args\n");
> - return -EINVAL;
> - }
> -
> - if (dpu_crtc->scl3_lut_cfg->is_configured) {
> - DPU_DEBUG("lut already configured\n");
> - return 0;
> - }
> -
> - lut_data = msm_property_get_blob(&dpu_crtc->property_info,
> - &cstate->property_state, &len, lut_idx);
> - if (!lut_data || !len) {
> - DPU_ERROR("lut(%d): no data, len(%zu)\n", lut_idx, len);
> - return -ENODATA;
> - }
> -
> - cfg = dpu_crtc->scl3_lut_cfg;
> -
> - switch (lut_idx) {
> - case CRTC_PROP_DEST_SCALER_LUT_ED:
> - cfg->dir_lut = lut_data;
> - cfg->dir_len = len;
> - break;
> - case CRTC_PROP_DEST_SCALER_LUT_CIR:
> - cfg->cir_lut = lut_data;
> - cfg->cir_len = len;
> - break;
> - case CRTC_PROP_DEST_SCALER_LUT_SEP:
> - cfg->sep_lut = lut_data;
> - cfg->sep_len = len;
> - break;
> - default:
> - ret = -EINVAL;
> - DPU_ERROR("invalid LUT index = %d", lut_idx);
> - break;
> - }
> -
> - if (cfg->dir_lut && cfg->cir_lut && cfg->sep_lut)
> - cfg->is_configured = true;
> -
> - return ret;
> -}
> -
> -/**
> - * _dpu_crtc_dest_scaler_setup - Set up dest scaler block
> - * @crtc: Pointer to drm crtc
> - */
> -static void _dpu_crtc_dest_scaler_setup(struct drm_crtc *crtc)
> -{
> - struct dpu_crtc *dpu_crtc;
> - struct dpu_crtc_state *cstate;
> - struct dpu_hw_mixer *hw_lm;
> - struct dpu_hw_ctl *hw_ctl;
> - struct dpu_hw_ds *hw_ds;
> - struct dpu_hw_ds_cfg *cfg;
> - struct dpu_kms *kms;
> - u32 flush_mask = 0, op_mode = 0;
> - u32 lm_idx = 0, num_mixers = 0;
> - int i, count = 0;
> -
> - if (!crtc)
> - return;
> -
> - dpu_crtc = to_dpu_crtc(crtc);
> - cstate = to_dpu_crtc_state(crtc->state);
> - kms = _dpu_crtc_get_kms(crtc);
> - num_mixers = dpu_crtc->num_mixers;
> -
> - DPU_DEBUG("crtc%d\n", crtc->base.id);
> -
> - if (!cstate->ds_dirty) {
> - DPU_DEBUG("no change in settings, skip commit\n");
> - } else if (!kms || !kms->catalog) {
> - DPU_ERROR("invalid parameters\n");
> - } else if (!kms->catalog->mdp[0].has_dest_scaler) {
> - DPU_DEBUG("dest scaler feature not supported\n");
> - } else if (num_mixers > CRTC_DUAL_MIXERS) {
> - DPU_ERROR("invalid number mixers: %d\n", num_mixers);
> - } else if (!dpu_crtc->scl3_lut_cfg->is_configured) {
> - DPU_DEBUG("no LUT data available\n");
> - } else {
> - count = cstate->num_ds_enabled ? cstate->num_ds : num_mixers;
> -
> - for (i = 0; i < count; i++) {
> - cfg = &cstate->ds_cfg[i];
> -
> - if (!cfg->flags)
> - continue;
> -
> - lm_idx = cfg->ndx;
> - hw_lm = dpu_crtc->mixers[lm_idx].hw_lm;
> - hw_ctl = dpu_crtc->mixers[lm_idx].hw_ctl;
> - hw_ds = dpu_crtc->mixers[lm_idx].hw_ds;
> -
> - /* Setup op mode - Dual/single */
> - if (cfg->flags & DPU_DRM_DESTSCALER_ENABLE)
> - op_mode |= BIT(hw_ds->idx - DS_0);
> -
> - if ((i == count-1) && hw_ds->ops.setup_opmode) {
> - op_mode |= (cstate->num_ds_enabled ==
> - CRTC_DUAL_MIXERS) ?
> - DPU_DS_OP_MODE_DUAL : 0;
> - hw_ds->ops.setup_opmode(hw_ds, op_mode);
> - DPU_EVT32(DRMID(crtc), op_mode);
> - }
> -
> - /* Setup scaler */
> - if ((cfg->flags & DPU_DRM_DESTSCALER_SCALE_UPDATE) ||
> - (cfg->flags &
> - DPU_DRM_DESTSCALER_ENHANCER_UPDATE)) {
> - if (hw_ds->ops.setup_scaler)
> - hw_ds->ops.setup_scaler(hw_ds,
> - cfg->scl3_cfg,
> - dpu_crtc->scl3_lut_cfg);
> -
> - /**
> - * Clear the flags as the block doesn't have to
> - * be programmed in each commit if no updates
> - */
> - cfg->flags &= ~DPU_DRM_DESTSCALER_SCALE_UPDATE;
> - cfg->flags &=
> - ~DPU_DRM_DESTSCALER_ENHANCER_UPDATE;
> - }
> -
> - /*
> - * Dest scaler shares the flush bit of the LM in control
> - */
> - if (cfg->set_lm_flush && hw_lm && hw_ctl &&
> - hw_ctl->ops.get_bitmask_mixer) {
> - flush_mask = hw_ctl->ops.get_bitmask_mixer(
> - hw_ctl, hw_lm->idx);
> - DPU_DEBUG("Set lm[%d] flush = %d",
> - hw_lm->idx, flush_mask);
> - hw_ctl->ops.update_pending_flush(hw_ctl,
> - flush_mask);
> - }
> - cfg->set_lm_flush = false;
> - }
> - cstate->ds_dirty = false;
> - }
> -}
> -
> -/**
> * _dpu_crtc_complete_flip - signal pending page_flip events
> * Any pending vblank events are added to the vblank_event_list
> * so that the next vblank interrupt shall signal them.
> @@ -1361,448 +1113,6 @@ void dpu_crtc_complete_commit(struct drm_crtc *crtc,
> DPU_EVT32_VERBOSE(DRMID(crtc));
> }
>
> -/* _dpu_crtc_set_idle_timeout - update idle timeout wait duration */
> -static void _dpu_crtc_set_idle_timeout(struct drm_crtc *crtc, u64 val)
> -{
> - struct drm_encoder *encoder;
> -
> - if (!crtc) {
> - DPU_ERROR("invalid crtc\n");
> - return;
> - }
> -
> - drm_for_each_encoder(encoder, crtc->dev) {
> - if (encoder->crtc != crtc)
> - continue;
> -
> - dpu_encoder_set_idle_timeout(encoder, (u32) val);
> - }
> -}
> -
> -/**
> - * _dpu_crtc_set_dim_layer_v1 - copy dim layer settings from userspace
> - * @cstate: Pointer to dpu crtc state
> - * @user_ptr: User ptr for dpu_drm_dim_layer_v1 struct
> - */
> -static void _dpu_crtc_set_dim_layer_v1(struct dpu_crtc_state *cstate,
> - void __user *usr_ptr)
> -{
> - struct dpu_drm_dim_layer_v1 dim_layer_v1;
> - struct dpu_drm_dim_layer_cfg *user_cfg;
> - struct dpu_hw_dim_layer *dim_layer;
> - u32 count, i;
> -
> - if (!cstate) {
> - DPU_ERROR("invalid cstate\n");
> - return;
> - }
> - dim_layer = cstate->dim_layer;
> -
> - if (!usr_ptr) {
> - DPU_DEBUG("dim_layer data removed\n");
> - return;
> - }
> -
> - if (copy_from_user(&dim_layer_v1, usr_ptr, sizeof(dim_layer_v1))) {
> - DPU_ERROR("failed to copy dim_layer data\n");
> - return;
> - }
> -
> - count = dim_layer_v1.num_layers;
> - if (count > DPU_MAX_DIM_LAYERS) {
> - DPU_ERROR("invalid number of dim_layers:%d", count);
> - return;
> - }
> -
> - /* populate from user space */
> - cstate->num_dim_layers = count;
> - for (i = 0; i < count; i++) {
> - user_cfg = &dim_layer_v1.layer_cfg[i];
> -
> - dim_layer[i].flags = user_cfg->flags;
> - dim_layer[i].stage = user_cfg->stage + DPU_STAGE_0;
> -
> - dim_layer[i].rect.x = user_cfg->rect.x1;
> - dim_layer[i].rect.y = user_cfg->rect.y1;
> - dim_layer[i].rect.w = user_cfg->rect.x2 - user_cfg->rect.x1;
> - dim_layer[i].rect.h = user_cfg->rect.y2 - user_cfg->rect.y1;
> -
> - dim_layer[i].color_fill = (struct dpu_mdss_color) {
> - user_cfg->color_fill.color_0,
> - user_cfg->color_fill.color_1,
> - user_cfg->color_fill.color_2,
> - user_cfg->color_fill.color_3,
> - };
> -
> - DPU_DEBUG("dim_layer[%d] - flags:%d, stage:%d\n",
> - i, dim_layer[i].flags, dim_layer[i].stage);
> - DPU_DEBUG(" rect:{%d,%d,%d,%d}, color:{%d,%d,%d,%d}\n",
> - dim_layer[i].rect.x, dim_layer[i].rect.y,
> - dim_layer[i].rect.w, dim_layer[i].rect.h,
> - dim_layer[i].color_fill.color_0,
> - dim_layer[i].color_fill.color_1,
> - dim_layer[i].color_fill.color_2,
> - dim_layer[i].color_fill.color_3);
> - }
> -}
> -
> -/**
> - * _dpu_crtc_dest_scaler_init - allocate memory for scaler lut
> - * @dpu_crtc : Pointer to dpu crtc
> - * @catalog : Pointer to mdss catalog info
> - */
> -static void _dpu_crtc_dest_scaler_init(struct dpu_crtc *dpu_crtc,
> - struct dpu_mdss_cfg *catalog)
> -{
> - if (!dpu_crtc || !catalog)
> - return;
> -
> - if (!catalog->mdp[0].has_dest_scaler) {
> - DPU_DEBUG("dest scaler feature not supported\n");
> - return;
> - }
> -
> - dpu_crtc->scl3_lut_cfg = kzalloc(sizeof(struct dpu_hw_scaler3_lut_cfg),
> - GFP_KERNEL);
> - if (!dpu_crtc->scl3_lut_cfg)
> - DPU_ERROR("failed to create scale LUT for dest scaler");
> -}
> -
> -/**
> - * _dpu_crtc_set_dest_scaler - copy dest scaler settings from userspace
> - * @dpu_crtc : Pointer to dpu crtc
> - * @cstate : Pointer to dpu crtc state
> - * @usr_ptr: User ptr for dpu_drm_dest_scaler_data struct
> - */
> -static int _dpu_crtc_set_dest_scaler(struct dpu_crtc *dpu_crtc,
> - struct dpu_crtc_state *cstate,
> - void __user *usr_ptr)
> -{
> - struct dpu_drm_dest_scaler_data ds_data;
> - struct dpu_drm_dest_scaler_cfg *ds_cfg_usr;
> - struct dpu_drm_scaler_v2 scaler_v2;
> - void __user *scaler_v2_usr;
> - int i, count, ret = 0;
> -
> - if (!dpu_crtc || !cstate) {
> - DPU_ERROR("invalid dpu_crtc/state\n");
> - return -EINVAL;
> - }
> -
> - DPU_DEBUG("crtc %s\n", dpu_crtc->name);
> -
> - cstate->num_ds = 0;
> - cstate->ds_dirty = false;
> - if (!usr_ptr) {
> - DPU_DEBUG("ds data removed\n");
> - return 0;
> - }
> -
> - if (copy_from_user(&ds_data, usr_ptr, sizeof(ds_data))) {
> - DPU_ERROR("failed to copy dest scaler data from user\n");
> - return -EINVAL;
> - }
> -
> - count = ds_data.num_dest_scaler;
> - if (!dpu_crtc->num_mixers || count > dpu_crtc->num_mixers ||
> - (count && (count != dpu_crtc->num_mixers) &&
> - !(ds_data.ds_cfg[0].flags & DPU_DRM_DESTSCALER_PU_ENABLE))) {
> - DPU_ERROR("invalid config:num ds(%d), mixers(%d),flags(%d)\n",
> - count, dpu_crtc->num_mixers, ds_data.ds_cfg[0].flags);
> - return -EINVAL;
> - }
> -
> - /* Populate from user space */
> - for (i = 0; i < count; i++) {
> - ds_cfg_usr = &ds_data.ds_cfg[i];
> -
> - cstate->ds_cfg[i].ndx = ds_cfg_usr->index;
> - cstate->ds_cfg[i].flags = ds_cfg_usr->flags;
> - cstate->ds_cfg[i].lm_width = ds_cfg_usr->lm_width;
> - cstate->ds_cfg[i].lm_height = ds_cfg_usr->lm_height;
> - cstate->ds_cfg[i].scl3_cfg = NULL;
> -
> - if (ds_cfg_usr->scaler_cfg) {
> - scaler_v2_usr =
> - (void __user *)((uintptr_t)ds_cfg_usr->scaler_cfg);
> -
> - memset(&scaler_v2, 0, sizeof(scaler_v2));
> -
> - cstate->ds_cfg[i].scl3_cfg =
> - kzalloc(sizeof(struct dpu_hw_scaler3_cfg),
> - GFP_KERNEL);
> -
> - if (!cstate->ds_cfg[i].scl3_cfg) {
> - ret = -ENOMEM;
> - goto err;
> - }
> -
> - if (copy_from_user(&scaler_v2, scaler_v2_usr,
> - sizeof(scaler_v2))) {
> - DPU_ERROR("scale data:copy from user failed\n");
> - ret = -EINVAL;
> - goto err;
> - }
> -
> - dpu_set_scaler_v2(cstate->ds_cfg[i].scl3_cfg,
> - &scaler_v2);
> -
> - DPU_DEBUG("en(%d)dir(%d)de(%d) src(%dx%d) dst(%dx%d)\n",
> - scaler_v2.enable, scaler_v2.dir_en,
> - scaler_v2.de.enable, scaler_v2.src_width[0],
> - scaler_v2.src_height[0], scaler_v2.dst_width,
> - scaler_v2.dst_height);
> - DPU_EVT32_VERBOSE(DRMID(&dpu_crtc->base),
> - scaler_v2.enable, scaler_v2.dir_en,
> - scaler_v2.de.enable, scaler_v2.src_width[0],
> - scaler_v2.src_height[0], scaler_v2.dst_width,
> - scaler_v2.dst_height);
> - }
> -
> - DPU_DEBUG("ds cfg[%d]-ndx(%d) flags(%d) lm(%dx%d)\n",
> - i, ds_cfg_usr->index, ds_cfg_usr->flags,
> - ds_cfg_usr->lm_width, ds_cfg_usr->lm_height);
> - DPU_EVT32_VERBOSE(DRMID(&dpu_crtc->base), i, ds_cfg_usr->index,
> - ds_cfg_usr->flags, ds_cfg_usr->lm_width,
> - ds_cfg_usr->lm_height);
> - }
> -
> - cstate->num_ds = count;
> - cstate->ds_dirty = true;
> - return 0;
> -
> -err:
> - for (; i >= 0; i--)
> - kfree(cstate->ds_cfg[i].scl3_cfg);
> -
> - return ret;
> -}
> -
> -/**
> - * _dpu_crtc_check_dest_scaler_data - validate the dest scaler data
> - * @crtc : Pointer to drm crtc
> - * @state : Pointer to drm crtc state
> - */
> -static int _dpu_crtc_check_dest_scaler_data(struct drm_crtc *crtc,
> - struct drm_crtc_state *state)
> -{
> - struct dpu_crtc *dpu_crtc;
> - struct dpu_crtc_state *cstate;
> - struct drm_display_mode *mode;
> - struct dpu_kms *kms;
> - struct dpu_hw_ds *hw_ds;
> - struct dpu_hw_ds_cfg *cfg;
> - u32 i, ret = 0, lm_idx;
> - u32 num_ds_enable = 0;
> - u32 max_in_width = 0, max_out_width = 0;
> - u32 prev_lm_width = 0, prev_lm_height = 0;
> -
> - if (!crtc || !state)
> - return -EINVAL;
> -
> - dpu_crtc = to_dpu_crtc(crtc);
> - cstate = to_dpu_crtc_state(state);
> - kms = _dpu_crtc_get_kms(crtc);
> - mode = &state->adjusted_mode;
> -
> - DPU_DEBUG("crtc%d\n", crtc->base.id);
> -
> - if (!cstate->ds_dirty && !cstate->num_ds_enabled) {
> - DPU_DEBUG("dest scaler property not set, skip validation\n");
> - return 0;
> - }
> -
> - if (!kms || !kms->catalog) {
> - DPU_ERROR("invalid parameters\n");
> - return -EINVAL;
> - }
> -
> - if (!kms->catalog->mdp[0].has_dest_scaler) {
> - DPU_DEBUG("dest scaler feature not supported\n");
> - return 0;
> - }
> -
> - if (!dpu_crtc->num_mixers) {
> - DPU_ERROR("mixers not allocated\n");
> - return -EINVAL;
> - }
> -
> - /**
> - * Check if sufficient hw resources are
> - * available as per target caps & topology
> - */
> - if (dpu_crtc->num_mixers > CRTC_DUAL_MIXERS) {
> - DPU_ERROR("invalid config: mixers(%d) max(%d)\n",
> - dpu_crtc->num_mixers, CRTC_DUAL_MIXERS);
> - ret = -EINVAL;
> - goto err;
> - }
> -
> - for (i = 0; i < dpu_crtc->num_mixers; i++) {
> - if (!dpu_crtc->mixers[i].hw_lm || !dpu_crtc->mixers[i].hw_ds) {
> - DPU_ERROR("insufficient HW resources allocated\n");
> - ret = -EINVAL;
> - goto err;
> - }
> - }
> -
> - /**
> - * Check if DS needs to be enabled or disabled
> - * In case of enable, validate the data
> - */
> - if (!cstate->ds_dirty || !cstate->num_ds ||
> - !(cstate->ds_cfg[0].flags & DPU_DRM_DESTSCALER_ENABLE)) {
> - DPU_DEBUG("disable dest scaler,dirty(%d)num(%d)flags(%d)\n",
> - cstate->ds_dirty, cstate->num_ds,
> - cstate->ds_cfg[0].flags);
> - goto disable;
> - }
> -
> - /**
> - * No of dest scalers shouldn't exceed hw ds block count and
> - * also, match the num of mixers unless it is partial update
> - * left only/right only use case - currently PU + DS is not supported
> - */
> - if (cstate->num_ds > kms->catalog->ds_count ||
> - ((cstate->num_ds != dpu_crtc->num_mixers) &&
> - !(cstate->ds_cfg[0].flags & DPU_DRM_DESTSCALER_PU_ENABLE))) {
> - DPU_ERROR("invalid cfg: num_ds(%d), hw_ds_cnt(%d) flags(%d)\n",
> - cstate->num_ds, kms->catalog->ds_count,
> - cstate->ds_cfg[0].flags);
> - ret = -EINVAL;
> - goto err;
> - }
> -
> - /* Validate the DS data */
> - for (i = 0; i < cstate->num_ds; i++) {
> - cfg = &cstate->ds_cfg[i];
> - lm_idx = cfg->ndx;
> -
> - /**
> - * Validate against topology
> - * No of dest scalers should match the num of mixers
> - * unless it is partial update left only/right only use case
> - */
> - if (lm_idx >= dpu_crtc->num_mixers || (i != lm_idx &&
> - !(cfg->flags & DPU_DRM_DESTSCALER_PU_ENABLE))) {
> - DPU_ERROR("invalid user data(%d):idx(%d), flags(%d)\n",
> - i, lm_idx, cfg->flags);
> - ret = -EINVAL;
> - goto err;
> - }
> -
> - hw_ds = dpu_crtc->mixers[lm_idx].hw_ds;
> -
> - if (!max_in_width && !max_out_width) {
> - max_in_width = hw_ds->scl->top->maxinputwidth;
> - max_out_width = hw_ds->scl->top->maxoutputwidth;
> -
> - if (cstate->num_ds == CRTC_DUAL_MIXERS)
> - max_in_width -= DPU_DS_OVERFETCH_SIZE;
> -
> - DPU_DEBUG("max DS width [%d,%d] for num_ds = %d\n",
> - max_in_width, max_out_width, cstate->num_ds);
> - }
> -
> - /* Check LM width and height */
> - if (cfg->lm_width > (mode->hdisplay/dpu_crtc->num_mixers) ||
> - cfg->lm_height > mode->vdisplay ||
> - !cfg->lm_width || !cfg->lm_height) {
> - DPU_ERROR("invalid lm size[%d,%d] display [%d,%d]\n",
> - cfg->lm_width,
> - cfg->lm_height,
> - mode->hdisplay/dpu_crtc->num_mixers,
> - mode->vdisplay);
> - ret = -E2BIG;
> - goto err;
> - }
> -
> - if (!prev_lm_width && !prev_lm_height) {
> - prev_lm_width = cfg->lm_width;
> - prev_lm_height = cfg->lm_height;
> - } else {
> - if (cfg->lm_width != prev_lm_width ||
> - cfg->lm_height != prev_lm_height) {
> - DPU_ERROR("lm size:left[%d,%d], right[%d %d]\n",
> - cfg->lm_width, cfg->lm_height,
> - prev_lm_width, prev_lm_height);
> - ret = -EINVAL;
> - goto err;
> - }
> - }
> -
> - /* Check scaler data */
> - if (cfg->flags & DPU_DRM_DESTSCALER_SCALE_UPDATE ||
> - cfg->flags & DPU_DRM_DESTSCALER_ENHANCER_UPDATE) {
> - if (!cfg->scl3_cfg) {
> - ret = -EINVAL;
> - DPU_ERROR("null scale data\n");
> - goto err;
> - }
> - if (cfg->scl3_cfg->src_width[0] > max_in_width ||
> - cfg->scl3_cfg->dst_width > max_out_width ||
> - !cfg->scl3_cfg->src_width[0] ||
> - !cfg->scl3_cfg->dst_width) {
> - DPU_ERROR("scale width(%d %d) for ds-%d:\n",
> - cfg->scl3_cfg->src_width[0],
> - cfg->scl3_cfg->dst_width,
> - hw_ds->idx - DS_0);
> - DPU_ERROR("scale_en = %d, DE_en =%d\n",
> - cfg->scl3_cfg->enable,
> - cfg->scl3_cfg->de.enable);
> -
> - cfg->flags &=
> - ~DPU_DRM_DESTSCALER_SCALE_UPDATE;
> - cfg->flags &=
> - ~DPU_DRM_DESTSCALER_ENHANCER_UPDATE;
> -
> - ret = -EINVAL;
> - goto err;
> - }
> - }
> -
> - if (cfg->flags & DPU_DRM_DESTSCALER_ENABLE)
> - num_ds_enable++;
> -
> - /**
> - * Validation successful, indicator for flush to be issued
> - */
> - cfg->set_lm_flush = true;
> -
> - DPU_DEBUG("ds[%d]: flags = 0x%X\n",
> - hw_ds->idx - DS_0, cfg->flags);
> - }
> -
> -disable:
> - DPU_DEBUG("dest scaler enable status, old = %d, new = %d",
> - cstate->num_ds_enabled, num_ds_enable);
> - DPU_EVT32(DRMID(crtc), cstate->num_ds_enabled, num_ds_enable,
> - cstate->ds_dirty);
> -
> - if (cstate->num_ds_enabled != num_ds_enable) {
> - /* Disabling destination scaler */
> - if (!num_ds_enable) {
> - for (i = 0; i < dpu_crtc->num_mixers; i++) {
> - cfg = &cstate->ds_cfg[i];
> - cfg->ndx = i;
> - /* Update scaler settings in disable case */
> - cfg->flags = DPU_DRM_DESTSCALER_SCALE_UPDATE;
> - cfg->scl3_cfg->enable = 0;
> - cfg->scl3_cfg->de.enable = 0;
> - cfg->set_lm_flush = true;
> - }
> - }
> - cstate->num_ds_enabled = num_ds_enable;
> - cstate->ds_dirty = true;
> - }
> -
> - return 0;
> -
> -err:
> - cstate->ds_dirty = false;
> - return ret;
> -}
> -
> static void _dpu_crtc_setup_mixer_for_encoder(
> struct drm_crtc *crtc,
> struct drm_encoder *enc)
> @@ -1813,11 +1123,10 @@ static void _dpu_crtc_setup_mixer_for_encoder(
> struct dpu_crtc_mixer *mixer;
> struct dpu_hw_ctl *last_valid_ctl = NULL;
> int i;
> - struct dpu_rm_hw_iter lm_iter, ctl_iter, ds_iter;
> + struct dpu_rm_hw_iter lm_iter, ctl_iter;
>
> dpu_rm_init_hw_iter(&lm_iter, enc->base.id, DPU_HW_BLK_LM);
> dpu_rm_init_hw_iter(&ctl_iter, enc->base.id, DPU_HW_BLK_CTL);
> - dpu_rm_init_hw_iter(&ds_iter, enc->base.id, DPU_HW_BLK_DS);
>
> /* Set up all the mixers and ctls reserved by this encoder */
> for (i = dpu_crtc->num_mixers; i < ARRAY_SIZE(dpu_crtc->mixers); i++) {
> @@ -1844,10 +1153,6 @@ static void _dpu_crtc_setup_mixer_for_encoder(
> return;
> }
>
> - /* DS may be null */
> - (void) dpu_rm_get_hw(rm, &ds_iter);
> - mixer->hw_ds = (struct dpu_hw_ds *)ds_iter.hw;
> -
> mixer->encoder = enc;
>
> dpu_crtc->num_mixers++;
> @@ -1855,9 +1160,6 @@ static void _dpu_crtc_setup_mixer_for_encoder(
> i, mixer->hw_lm->idx - LM_0);
> DPU_DEBUG("setup mixer %d: ctl %d\n",
> i, mixer->hw_ctl->idx - CTL_0);
> - if (mixer->hw_ds)
> - DPU_DEBUG("setup mixer %d: ds %d\n",
> - i, mixer->hw_ds->idx - DS_0);
> }
> }
>
> @@ -1973,7 +1275,6 @@ static void dpu_crtc_atomic_begin(struct drm_crtc *crtc,
> return;
>
> _dpu_crtc_blend_setup(crtc);
> - _dpu_crtc_dest_scaler_setup(crtc);
>
> /*
> * PP_DONE irq is only used by command mode for now.
> @@ -2672,13 +1973,6 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
>
> memset(pipe_staged, 0, sizeof(pipe_staged));
>
> - rc = _dpu_crtc_check_dest_scaler_data(crtc, state);
> - if (rc) {
> - DPU_ERROR("crtc%d failed dest scaler check %d\n",
> - crtc->base.id, rc);
> - goto end;
> - }
> -
> mixer_width = dpu_crtc_get_mixer_width(dpu_crtc, cstate, mode);
>
> _dpu_crtc_setup_lm_bounds(crtc, state);
> @@ -2699,19 +1993,6 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
> pstates[cnt].stage = pstate->normalized_zpos;
> pstates[cnt].pipe_id = dpu_plane_pipe(plane);
>
> - /* check dim layer stage with every plane */
> - for (i = 0; i < cstate->num_dim_layers; i++) {
> - if (cstate->dim_layer[i].stage
> - == (pstates[cnt].stage + DPU_STAGE_0)) {
> - DPU_ERROR(
> - "plane:%d/dim_layer:%i-same stage:%d\n",
> - plane->base.id, i,
> - cstate->dim_layer[i].stage);
> - rc = -EINVAL;
> - goto end;
> - }
> - }
> -
> if (pipe_staged[pstates[cnt].pipe_id]) {
> multirect_plane[multirect_count].r0 =
> pipe_staged[pstates[cnt].pipe_id];
> @@ -2947,52 +2228,11 @@ static void dpu_crtc_install_properties(struct drm_crtc *crtc,
> return;
> }
>
> - /* range properties */
> - msm_property_install_range(&dpu_crtc->property_info,
> - "core_clk", 0x0, 0, U64_MAX,
> - dpu_kms->perf.max_core_clk_rate,
> - CRTC_PROP_CORE_CLK);
> - msm_property_install_range(&dpu_crtc->property_info,
> - "core_ab", 0x0, 0, U64_MAX,
> - catalog->perf.max_bw_high * 1000ULL,
> - CRTC_PROP_CORE_AB);
> - msm_property_install_range(&dpu_crtc->property_info,
> - "core_ib", 0x0, 0, U64_MAX,
> - catalog->perf.max_bw_high * 1000ULL,
> - CRTC_PROP_CORE_IB);
> - msm_property_install_range(&dpu_crtc->property_info,
> - "llcc_ab", 0x0, 0, U64_MAX,
> - catalog->perf.max_bw_high * 1000ULL,
> - CRTC_PROP_LLCC_AB);
> - msm_property_install_range(&dpu_crtc->property_info,
> - "llcc_ib", 0x0, 0, U64_MAX,
> - catalog->perf.max_bw_high * 1000ULL,
> - CRTC_PROP_LLCC_IB);
> - msm_property_install_range(&dpu_crtc->property_info,
> - "dram_ab", 0x0, 0, U64_MAX,
> - catalog->perf.max_bw_high * 1000ULL,
> - CRTC_PROP_DRAM_AB);
> - msm_property_install_range(&dpu_crtc->property_info,
> - "dram_ib", 0x0, 0, U64_MAX,
> - catalog->perf.max_bw_high * 1000ULL,
> - CRTC_PROP_DRAM_IB);
> -
> - msm_property_install_range(&dpu_crtc->property_info,
> - "idle_timeout", IDLE_TIMEOUT, 0, U64_MAX, 0,
> - CRTC_PROP_IDLE_TIMEOUT);
> -
> msm_property_install_blob(&dpu_crtc->property_info, "capabilities",
> DRM_MODE_PROP_IMMUTABLE, CRTC_PROP_INFO);
>
> dpu_kms_info_reset(info);
>
> - if (catalog->caps->has_dim_layer) {
> - msm_property_install_volatile_range(&dpu_crtc->property_info,
> - "dim_layer_v1", 0x0, 0, ~0, 0, CRTC_PROP_DIM_LAYER_V1);
> - dpu_kms_info_add_keyint(info, "dim_layer_v1_max_layers",
> - DPU_MAX_DIM_LAYERS);
> - }
> -
> dpu_kms_info_add_keyint(info, "hw_version", catalog->hwversion);
> dpu_kms_info_add_keyint(info, "max_linewidth",
> catalog->caps->max_mixer_width);
> @@ -3012,39 +2252,6 @@ static void dpu_crtc_install_properties(struct drm_crtc *crtc,
> "smart_dma_rev", "smart_dma_v2");
> }
>
> - if (catalog->mdp[0].has_dest_scaler) {
> - dpu_kms_info_add_keyint(info, "has_dest_scaler",
> - catalog->mdp[0].has_dest_scaler);
> - dpu_kms_info_add_keyint(info, "dest_scaler_count",
> - catalog->ds_count);
> -
> - if (catalog->ds[0].top) {
> - dpu_kms_info_add_keyint(info,
> - "max_dest_scaler_input_width",
> - catalog->ds[0].top->maxinputwidth);
> - dpu_kms_info_add_keyint(info,
> - "max_dest_scaler_output_width",
> - catalog->ds[0].top->maxinputwidth);
> - dpu_kms_info_add_keyint(info, "max_dest_scale_up",
> - catalog->ds[0].top->maxupscale);
> - }
> -
> - if (catalog->ds[0].features & BIT(DPU_SSPP_SCALER_QSEED3)) {
> - msm_property_install_volatile_range(
> - &dpu_crtc->property_info, "dest_scaler",
> - 0x0, 0, ~0, 0, CRTC_PROP_DEST_SCALER);
> - msm_property_install_blob(&dpu_crtc->property_info,
> - "ds_lut_ed", 0,
> - CRTC_PROP_DEST_SCALER_LUT_ED);
> - msm_property_install_blob(&dpu_crtc->property_info,
> - "ds_lut_cir", 0,
> - CRTC_PROP_DEST_SCALER_LUT_CIR);
> - msm_property_install_blob(&dpu_crtc->property_info,
> - "ds_lut_sep", 0,
> - CRTC_PROP_DEST_SCALER_LUT_SEP);
> - }
> - }
> -
> dpu_kms_info_add_keyint(info, "has_src_split",
> catalog->caps->has_src_split);
> if (catalog->perf.max_bw_low)
> @@ -3113,7 +2320,7 @@ static int dpu_crtc_atomic_set_property(struct drm_crtc *crtc,
> {
> struct dpu_crtc *dpu_crtc;
> struct dpu_crtc_state *cstate;
> - int idx, ret = -EINVAL;
> + int ret = -EINVAL;
>
> if (!crtc || !state || !property) {
> DPU_ERROR("invalid argument(s)\n");
> @@ -3122,45 +2329,8 @@ static int dpu_crtc_atomic_set_property(struct drm_crtc *crtc,
> cstate = to_dpu_crtc_state(state);
> ret = msm_property_atomic_set(&dpu_crtc->property_info,
> &cstate->property_state, property, val);
> - if (!ret) {
> - idx = msm_property_index(&dpu_crtc->property_info,
> - property);
> - switch (idx) {
> - case CRTC_PROP_DIM_LAYER_V1:
> - _dpu_crtc_set_dim_layer_v1(cstate,
> - u64_to_user_ptr(val));
> - break;
> - case CRTC_PROP_DEST_SCALER:
> - ret = _dpu_crtc_set_dest_scaler(dpu_crtc,
> - cstate, u64_to_user_ptr(val));
> - break;
> - case CRTC_PROP_DEST_SCALER_LUT_ED:
> - case CRTC_PROP_DEST_SCALER_LUT_CIR:
> - case CRTC_PROP_DEST_SCALER_LUT_SEP:
> - ret = _dpu_crtc_set_dest_scaler_lut(dpu_crtc,
> - cstate, idx);
> - break;
> - case CRTC_PROP_CORE_CLK:
> - case CRTC_PROP_CORE_AB:
> - case CRTC_PROP_CORE_IB:
> - cstate->bw_control = true;
> - break;
> - case CRTC_PROP_LLCC_AB:
> - case CRTC_PROP_LLCC_IB:
> - case CRTC_PROP_DRAM_AB:
> - case CRTC_PROP_DRAM_IB:
> - cstate->bw_control = true;
> - cstate->bw_split_vote = true;
> - break;
> - case CRTC_PROP_IDLE_TIMEOUT:
> - _dpu_crtc_set_idle_timeout(crtc, val);
> - default:
> - /* nothing to do */
> - break;
> - }
> - } else {
> + if (ret)
> DRM_ERROR("failed to set the property\n");
> - }
>
> DPU_DEBUG("crtc%d %s[%d] <= 0x%llx ret=%d\n", crtc->base.id,
> property->name, property->base.id, val, ret);
> @@ -3276,23 +2446,6 @@ static int _dpu_debugfs_status_show(struct seq_file *s, void *data)
>
> seq_puts(s, "\n");
>
> - for (i = 0; i < cstate->num_dim_layers; i++) {
> - struct dpu_hw_dim_layer *dim_layer = &cstate->dim_layer[i];
> -
> - seq_printf(s, "\tdim_layer:%d] stage:%d flags:%d\n",
> - i, dim_layer->stage, dim_layer->flags);
> - seq_printf(s, "\tdst_x:%d dst_y:%d dst_w:%d dst_h:%d\n",
> - dim_layer->rect.x, dim_layer->rect.y,
> - dim_layer->rect.w, dim_layer->rect.h);
> - seq_printf(s,
> - "\tcolor_0:%d color_1:%d color_2:%d color_3:%d\n",
> - dim_layer->color_fill.color_0,
> - dim_layer->color_fill.color_1,
> - dim_layer->color_fill.color_2,
> - dim_layer->color_fill.color_3);
> - seq_puts(s, "\n");
> - }
> -
> drm_atomic_crtc_for_each_plane(plane, crtc) {
> pstate = to_dpu_plane_state(plane->state);
> state = plane->state;
> @@ -3779,9 +2932,6 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane)
>
> dpu_crtc_install_properties(crtc, kms->catalog);
>
> - /* Init dest scaler */
> - _dpu_crtc_dest_scaler_init(dpu_crtc, kms->catalog);
> -
> DPU_DEBUG("%s: successfully initialized crtc\n", dpu_crtc->name);
> return crtc;
> }
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
> index 5f380b8..6628eb3 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
> @@ -26,7 +26,6 @@
> #include "dpu_kms.h"
> #include "dpu_core_perf.h"
> #include "dpu_hw_blk.h"
> -#include "dpu_hw_ds.h"
>
> #define DPU_CRTC_NAME_SIZE 12
>
> @@ -87,7 +86,6 @@ struct dpu_crtc_smmu_state_data {
> * struct dpu_crtc_mixer: stores the map for each virtual pipeline in the CRTC
> * @hw_lm: LM HW Driver context
> * @hw_ctl: CTL Path HW driver context
> - * @hw_ds: DS HW driver context
> * @encoder: Encoder attached to this lm & ctl
> * @mixer_op_mode: mixer blending operation mode
> * @flush_mask: mixer flush mask for ctl, mixer and pipe
> @@ -95,7 +93,6 @@ struct dpu_crtc_smmu_state_data {
> struct dpu_crtc_mixer {
> struct dpu_hw_mixer *hw_lm;
> struct dpu_hw_ctl *hw_ctl;
> - struct dpu_hw_ds *hw_ds;
> struct drm_encoder *encoder;
> u32 mixer_op_mode;
> u32 flush_mask;
> @@ -314,12 +311,6 @@ struct dpu_crtc_respool {
> * @property_state: Local storage for msm_prop properties
> * @property_values: Current crtc property values
> * @input_fence_timeout_ns : Cached input fence timeout, in ns
> - * @num_dim_layers: Number of dim layers
> - * @dim_layer: Dim layer configs
> - * @num_ds: Number of destination scalers to be configured
> - * @num_ds_enabled: Number of destination scalers enabled
> - * @ds_dirty: Boolean to indicate if dirty or not
> - * @ds_cfg: Destination scaler config
> * @new_perf: new performance state being requested
> */
> struct dpu_crtc_state {
> @@ -336,12 +327,6 @@ struct dpu_crtc_state {
> struct msm_property_state property_state;
> struct msm_property_value property_values[CRTC_PROP_COUNT];
> uint64_t input_fence_timeout_ns;
> - uint32_t num_dim_layers;
> - struct dpu_hw_dim_layer dim_layer[DPU_MAX_DIM_LAYERS];
> - uint32_t num_ds;
> - uint32_t num_ds_enabled;
> - bool ds_dirty;
> - struct dpu_hw_ds_cfg ds_cfg[DPU_MAX_DS_COUNT];
>
> struct dpu_core_perf_params new_perf;
> struct dpu_crtc_respool rp;
> @@ -362,7 +347,6 @@ struct dpu_crtc_state {
> /**
> * dpu_crtc_get_mixer_width - get the mixer width
> * Mixer width will be same as panel width(/2 for split)
> - * unless destination scaler feature is enabled
> */
> static inline int dpu_crtc_get_mixer_width(struct dpu_crtc *dpu_crtc,
> struct dpu_crtc_state *cstate, struct drm_display_mode *mode)
> @@ -372,10 +356,7 @@ static inline int dpu_crtc_get_mixer_width(struct dpu_crtc *dpu_crtc,
> if (!dpu_crtc || !cstate || !mode)
> return 0;
>
> - if (cstate->num_ds_enabled)
> - mixer_width = cstate->ds_cfg[0].lm_width;
> - else
> - mixer_width = (dpu_crtc->num_mixers == CRTC_DUAL_MIXERS ?
> + mixer_width = (dpu_crtc->num_mixers == CRTC_DUAL_MIXERS ?
> mode->hdisplay / CRTC_DUAL_MIXERS : mode->hdisplay);
>
> return mixer_width;
> @@ -383,8 +364,7 @@ static inline int dpu_crtc_get_mixer_width(struct dpu_crtc *dpu_crtc,
>
> /**
> * dpu_crtc_get_mixer_height - get the mixer height
> - * Mixer height will be same as panel height unless
> - * destination scaler feature is enabled
> + * Mixer height will be same as panel height
> */
> static inline int dpu_crtc_get_mixer_height(struct dpu_crtc *dpu_crtc,
> struct dpu_crtc_state *cstate, struct drm_display_mode *mode)
> @@ -392,8 +372,7 @@ static inline int dpu_crtc_get_mixer_height(struct dpu_crtc *dpu_crtc,
> if (!dpu_crtc || !cstate || !mode)
> return 0;
>
> - return (cstate->num_ds_enabled ?
> - cstate->ds_cfg[0].lm_height : mode->vdisplay);
> + return mode->vdisplay;
> }
>
> /**
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index 77d3571..62660e0 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -230,18 +230,6 @@ struct dpu_encoder_virt {
> };
>
> #define to_dpu_encoder_virt(x) container_of(x, struct dpu_encoder_virt, base)
> -
> -void dpu_encoder_set_idle_timeout(struct drm_encoder *drm_enc, u32 idle_timeout)
> -{
> - struct dpu_encoder_virt *dpu_enc;
> -
> - if (!drm_enc)
> - return;
> -
> - dpu_enc = to_dpu_encoder_virt(drm_enc);
> - dpu_enc->idle_timeout = idle_timeout;
> -}
> -
> static inline int _dpu_encoder_power_enable(struct dpu_encoder_virt *dpu_enc,
> bool enable)
> {
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ds.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ds.c
> deleted file mode 100644
> index fad19fb..0000000
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ds.c
> +++ /dev/null
> @@ -1,149 +0,0 @@
> -/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 and
> - * only version 2 as published by the Free Software Foundation.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - */
> -
> -#include "dpu_hw_ds.h"
> -#include "dpu_formats.h"
> -#include "dpu_dbg.h"
> -#include "dpu_kms.h"
> -
> -/* Destination scaler TOP registers */
> -#define DEST_SCALER_OP_MODE 0x00
> -#define DEST_SCALER_HW_VERSION 0x10
> -
> -static void dpu_hw_ds_setup_opmode(struct dpu_hw_ds *hw_ds,
> - u32 op_mode)
> -{
> - struct dpu_hw_blk_reg_map *hw = &hw_ds->hw;
> -
> - DPU_REG_WRITE(hw, DEST_SCALER_OP_MODE, op_mode);
> -}
> -
> -static void dpu_hw_ds_setup_scaler3(struct dpu_hw_ds *hw_ds,
> - void *scaler_cfg, void *scaler_lut_cfg)
> -{
> - struct dpu_hw_scaler3_cfg *scl3_cfg = scaler_cfg;
> - struct dpu_hw_scaler3_lut_cfg *scl3_lut_cfg = scaler_lut_cfg;
> -
> - if (!hw_ds || !hw_ds->scl || !scl3_cfg || !scl3_lut_cfg)
> - return;
> -
> - /*
> - * copy LUT values to scaler structure
> - */
> - if (scl3_lut_cfg->is_configured) {
> - scl3_cfg->dir_lut = scl3_lut_cfg->dir_lut;
> - scl3_cfg->dir_len = scl3_lut_cfg->dir_len;
> - scl3_cfg->cir_lut = scl3_lut_cfg->cir_lut;
> - scl3_cfg->cir_len = scl3_lut_cfg->cir_len;
> - scl3_cfg->sep_lut = scl3_lut_cfg->sep_lut;
> - scl3_cfg->sep_len = scl3_lut_cfg->sep_len;
> - }
> -
> - dpu_hw_setup_scaler3(&hw_ds->hw, scl3_cfg,
> - hw_ds->scl->base,
> - hw_ds->scl->version,
> - dpu_get_dpu_format(DRM_FORMAT_XBGR2101010));
> -}
> -
> -static void _setup_ds_ops(struct dpu_hw_ds_ops *ops, unsigned long features)
> -{
> - ops->setup_opmode = dpu_hw_ds_setup_opmode;
> -
> - if (test_bit(DPU_SSPP_SCALER_QSEED3, &features))
> - ops->setup_scaler = dpu_hw_ds_setup_scaler3;
> -}
> -
> -static struct dpu_ds_cfg *_ds_offset(enum dpu_ds ds,
> - struct dpu_mdss_cfg *m,
> - void __iomem *addr,
> - struct dpu_hw_blk_reg_map *b)
> -{
> - int i;
> -
> - if (!m || !addr || !b)
> - return ERR_PTR(-EINVAL);
> -
> - for (i = 0; i < m->ds_count; i++) {
> - if ((ds == m->ds[i].id) &&
> - (m->ds[i].top)) {
> - b->base_off = addr;
> - b->blk_off = m->ds[i].top->base;
> - b->length = m->ds[i].top->len;
> - b->hwversion = m->hwversion;
> - b->log_mask = DPU_DBG_MASK_DS;
> - return &m->ds[i];
> - }
> - }
> -
> - return ERR_PTR(-EINVAL);
> -}
> -
> -static struct dpu_hw_blk_ops dpu_hw_ops = {
> - .start = NULL,
> - .stop = NULL,
> -};
> -
> -struct dpu_hw_ds *dpu_hw_ds_init(enum dpu_ds idx,
> - void __iomem *addr,
> - struct dpu_mdss_cfg *m)
> -{
> - struct dpu_hw_ds *hw_ds;
> - struct dpu_ds_cfg *cfg;
> - int rc;
> -
> - if (!addr || !m)
> - return ERR_PTR(-EINVAL);
> -
> - hw_ds = kzalloc(sizeof(*hw_ds), GFP_KERNEL);
> - if (!hw_ds)
> - return ERR_PTR(-ENOMEM);
> -
> - cfg = _ds_offset(idx, m, addr, &hw_ds->hw);
> - if (IS_ERR_OR_NULL(cfg)) {
> - DPU_ERROR("failed to get ds cfg\n");
> - kfree(hw_ds);
> - return ERR_PTR(-EINVAL);
> - }
> -
> - /* Assign ops */
> - hw_ds->idx = idx;
> - hw_ds->scl = cfg;
> - _setup_ds_ops(&hw_ds->ops, hw_ds->scl->features);
> -
> - rc = dpu_hw_blk_init(&hw_ds->base, DPU_HW_BLK_DS, idx, &dpu_hw_ops);
> - if (rc) {
> - DPU_ERROR("failed to init hw blk %d\n", rc);
> - goto blk_init_error;
> - }
> -
> - if (cfg->len) {
> - dpu_dbg_reg_register_dump_range(DPU_DBG_NAME, cfg->name,
> - hw_ds->hw.blk_off + cfg->base,
> - hw_ds->hw.blk_off + cfg->base + cfg->len,
> - hw_ds->hw.xin_id);
> - }
> -
> - return hw_ds;
> -
> -blk_init_error:
> - kzfree(hw_ds);
> -
> - return ERR_PTR(rc);
> -
> -}
> -
> -void dpu_hw_ds_destroy(struct dpu_hw_ds *hw_ds)
> -{
> - if (hw_ds)
> - dpu_hw_blk_destroy(&hw_ds->base);
> - kfree(hw_ds);
> -}
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ds.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ds.h
> deleted file mode 100644
> index 2455920..0000000
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ds.h
> +++ /dev/null
> @@ -1,111 +0,0 @@
> -/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 and
> - * only version 2 as published by the Free Software Foundation.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - */
> -
> -#ifndef _DPU_HW_DS_H
> -#define _DPU_HW_DS_H
> -
> -#include "dpu_hw_mdss.h"
> -#include "dpu_hw_util.h"
> -#include "dpu_hw_catalog.h"
> -#include "dpu_hw_blk.h"
> -
> -struct dpu_hw_ds;
> -
> -/* Destination Scaler DUAL mode overfetch pixel count */
> -#define DPU_DS_OVERFETCH_SIZE 5
> -
> -/* Destination scaler DUAL mode operation bit */
> -#define DPU_DS_OP_MODE_DUAL BIT(16)
> -
> -/* struct dpu_hw_ds_cfg - destination scaler config
> - * @ndx : DS selection index
> - * @flags : Flag to switch between mode for DS
> - * @lm_width : Layer mixer width configuration
> - * @lm_heigh : Layer mixer height configuration
> - * @set_lm_flush : LM flush bit
> - * @scl3_cfg : Pointer to dpu_hw_scaler3_cfg.
> - */
> -struct dpu_hw_ds_cfg {
> - u32 ndx;
> - int flags;
> - u32 lm_width;
> - u32 lm_height;
> - bool set_lm_flush;
> - struct dpu_hw_scaler3_cfg *scl3_cfg;
> -};
> -
> -/**
> - * struct dpu_hw_ds_ops - interface to the destination scaler
> - * hardware driver functions
> - * Caller must call the init function to get the ds context for each ds
> - * Assumption is these functions will be called after clocks are enabled
> - */
> -struct dpu_hw_ds_ops {
> - /**
> - * setup_opmode - destination scaler op mode setup
> - * @hw_ds : Pointer to ds context
> - * @op_mode : Op mode configuration
> - */
> - void (*setup_opmode)(struct dpu_hw_ds *hw_ds,
> - u32 op_mode);
> -
> - /**
> - * setup_scaler - destination scaler block setup
> - * @hw_ds : Pointer to ds context
> - * @scaler_cfg : Pointer to scaler data
> - * @scaler_lut_cfg : Pointer to scaler lut
> - */
> - void (*setup_scaler)(struct dpu_hw_ds *hw_ds,
> - void *scaler_cfg,
> - void *scaler_lut_cfg);
> -
> -};
> -
> -/**
> - * struct dpu_hw_ds - destination scaler description
> - * @base : Hardware block base structure
> - * @hw : Block hardware details
> - * @idx : Destination scaler index
> - * @scl : Pointer to
> - * - scaler offset relative to top offset
> - * - capabilities
> - * @ops : Pointer to operations for this DS
> - */
> -struct dpu_hw_ds {
> - struct dpu_hw_blk base;
> - struct dpu_hw_blk_reg_map hw;
> - enum dpu_ds idx;
> - const struct dpu_ds_cfg *scl;
> - struct dpu_hw_ds_ops ops;
> -};
> -
> -/**
> - * dpu_hw_ds_init - initializes the destination scaler
> - * hw driver object and should be called once before
> - * accessing every destination scaler
> - * @idx : DS index for which driver object is required
> - * @addr: Mapped register io address of MDP
> - * @m : MDSS catalog information
> - * @Return: pointer to structure or ERR_PTR
> - */
> -struct dpu_hw_ds *dpu_hw_ds_init(enum dpu_ds idx,
> - void __iomem *addr,
> - struct dpu_mdss_cfg *m);
> -
> -/**
> - * dpu_hw_ds_destroy - destroys destination scaler
> - * driver context
> - * @hw_ds: Pointer to DS context
> - */
> -void dpu_hw_ds_destroy(struct dpu_hw_ds *hw_ds);
> -
> -#endif /*_DPU_HW_DS_H */
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c
> index 75a30db..830b69e 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c
> @@ -172,68 +172,6 @@ static void dpu_hw_lm_gc(struct dpu_hw_mixer *mixer,
> {
> }
>
> -static void dpu_hw_lm_clear_dim_layer(struct dpu_hw_mixer *ctx)
> -{
> - struct dpu_hw_blk_reg_map *c = &ctx->hw;
> - const struct dpu_lm_sub_blks *sblk = ctx->cap->sblk;
> - int stage_off, i;
> - u32 reset = BIT(16), val;
> -
> - reset = ~reset;
> - for (i = DPU_STAGE_0; i < sblk->maxblendstages; i++) {
> - stage_off = _stage_offset(ctx, i);
> - if (WARN_ON(stage_off < 0))
> - return;
> -
> - /*
> - * read the existing blendn_op register and clear only DIM layer
> - * bit (color_fill bit)
> - */
> - val = DPU_REG_READ(c, LM_BLEND0_OP + stage_off);
> - val &= reset;
> - DPU_REG_WRITE(c, LM_BLEND0_OP + stage_off, val);
> - }
> -}
> -
> -static void dpu_hw_lm_setup_dim_layer(struct dpu_hw_mixer *ctx,
> - struct dpu_hw_dim_layer *dim_layer)
> -{
> - struct dpu_hw_blk_reg_map *c = &ctx->hw;
> - int stage_off;
> - u32 val = 0, alpha = 0;
> -
> - stage_off = _stage_offset(ctx, dim_layer->stage);
> - if (stage_off < 0) {
> - DPU_ERROR("invalid stage_off:%d for dim layer\n", stage_off);
> - return;
> - }
> -
> - alpha = dim_layer->color_fill.color_3 & 0xFF;
> - val = ((dim_layer->color_fill.color_1 << 2) & 0xFFF) << 16 |
> - ((dim_layer->color_fill.color_0 << 2) & 0xFFF);
> - DPU_REG_WRITE(c, LM_FG_COLOR_FILL_COLOR_0 + stage_off, val);
> -
> - val = (alpha << 4) << 16 |
> - ((dim_layer->color_fill.color_2 << 2) & 0xFFF);
> - DPU_REG_WRITE(c, LM_FG_COLOR_FILL_COLOR_1 + stage_off, val);
> -
> - val = dim_layer->rect.h << 16 | dim_layer->rect.w;
> - DPU_REG_WRITE(c, LM_FG_COLOR_FILL_SIZE + stage_off, val);
> -
> - val = dim_layer->rect.y << 16 | dim_layer->rect.x;
> - DPU_REG_WRITE(c, LM_FG_COLOR_FILL_XY + stage_off, val);
> -
> - val = BIT(16); /* enable dim layer */
> - val |= DPU_BLEND_FG_ALPHA_FG_CONST | DPU_BLEND_BG_ALPHA_BG_CONST;
> - if (dim_layer->flags & DPU_DRM_DIM_LAYER_EXCLUSIVE)
> - val |= BIT(17);
> - else
> - val &= ~BIT(17);
> - DPU_REG_WRITE(c, LM_BLEND0_OP + stage_off, val);
> - val = (alpha << 16) | (0xff - alpha);
> - DPU_REG_WRITE(c, LM_BLEND0_CONST_ALPHA + stage_off, val);
> -}
> -
> static void dpu_hw_lm_setup_misr(struct dpu_hw_mixer *ctx,
> bool enable, u32 frame_count)
> {
> @@ -272,11 +210,6 @@ static void _setup_mixer_ops(struct dpu_mdss_cfg *m,
> ops->setup_gc = dpu_hw_lm_gc;
> ops->setup_misr = dpu_hw_lm_setup_misr;
> ops->collect_misr = dpu_hw_lm_collect_misr;
> -
> - if (test_bit(DPU_DIM_LAYER, &features)) {
> - ops->setup_dim_layer = dpu_hw_lm_setup_dim_layer;
> - ops->clear_dim_layer = dpu_hw_lm_clear_dim_layer;
> - }
> };
>
> static struct dpu_hw_blk_ops dpu_hw_ops = {
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h
> index ef22c86..e29e5da 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h
> @@ -67,20 +67,6 @@ struct dpu_hw_lm_ops {
> void (*setup_gc)(struct dpu_hw_mixer *mixer,
> void *cfg);
>
> - /**
> - * setup_dim_layer: configure dim layer settings
> - * @ctx: Pointer to layer mixer context
> - * @dim_layer: dim layer configs
> - */
> - void (*setup_dim_layer)(struct dpu_hw_mixer *ctx,
> - struct dpu_hw_dim_layer *dim_layer);
> -
> - /**
> - * clear_dim_layer: clear dim layer settings
> - * @ctx: Pointer to layer mixer context
> - */
> - void (*clear_dim_layer)(struct dpu_hw_mixer *ctx);
> -
> /* setup_misr: enables/disables MISR in HW register */
> void (*setup_misr)(struct dpu_hw_mixer *ctx,
> bool enable, u32 frame_count);
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> index fcd164f..836ff9e 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> @@ -99,7 +99,6 @@ enum dpu_hw_blk_type {
> DPU_HW_BLK_TOP = 0,
> DPU_HW_BLK_SSPP,
> DPU_HW_BLK_LM,
> - DPU_HW_BLK_DS,
> DPU_HW_BLK_CTL,
> DPU_HW_BLK_CDM,
> DPU_HW_BLK_PINGPONG,
> @@ -469,20 +468,5 @@ struct dpu_mdss_color {
> #define DPU_DBG_MASK_TOP (1 << 8)
> #define DPU_DBG_MASK_VBIF (1 << 9)
> #define DPU_DBG_MASK_ROT (1 << 10)
> -#define DPU_DBG_MASK_DS (1 << 11)
> -
> -/**
> - * struct dpu_hw_dim_layer: dim layer configs
> - * @flags: Flag to represent INCLUSIVE/EXCLUSIVE
> - * @stage: Blending stage of dim layer
> - * @color_fill: Color fill to be used for the layer
> - * @rect: Dim layer coordinates
> - */
> -struct dpu_hw_dim_layer {
> - uint32_t flags;
> - uint32_t stage;
> - struct dpu_mdss_color color_fill;
> - struct dpu_rect rect;
> -};
>
> #endif /* _DPU_HW_MDSS_H */
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> index f467bf1..0af2996 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> @@ -17,7 +17,6 @@
> #include "dpu_hw_lm.h"
> #include "dpu_hw_ctl.h"
> #include "dpu_hw_cdm.h"
> -#include "dpu_hw_ds.h"
> #include "dpu_hw_pingpong.h"
> #include "dpu_hw_intf.h"
> #include "dpu_hw_wb.h"
> @@ -235,9 +234,6 @@ static void _dpu_rm_hw_destroy(enum dpu_hw_blk_type type, void *hw)
> case DPU_HW_BLK_LM:
> dpu_hw_lm_destroy(hw);
> break;
> - case DPU_HW_BLK_DS:
> - dpu_hw_ds_destroy(hw);
> - break;
> case DPU_HW_BLK_CTL:
> dpu_hw_ctl_destroy(hw);
> break;
> @@ -317,9 +313,6 @@ static int _dpu_rm_hw_blk_create(
> case DPU_HW_BLK_LM:
> hw = dpu_hw_lm_init(id, mmio, cat);
> break;
> - case DPU_HW_BLK_DS:
> - hw = dpu_hw_ds_init(id, mmio, cat);
> - break;
> case DPU_HW_BLK_CTL:
> hw = dpu_hw_ctl_init(id, mmio, cat);
> break;
> @@ -427,17 +420,6 @@ int dpu_rm_init(struct dpu_rm *rm,
> }
> }
>
> - if (cat->mdp[0].has_dest_scaler) {
> - for (i = 0; i < cat->ds_count; i++) {
> - rc = _dpu_rm_hw_blk_create(rm, cat, mmio, DPU_HW_BLK_DS,
> - cat->ds[i].id, &cat->ds[i]);
> - if (rc) {
> - DPU_ERROR("failed: ds hw not available\n");
> - goto fail;
> - }
> - }
> - }
> -
> for (i = 0; i < cat->pingpong_count; i++) {
> rc = _dpu_rm_hw_blk_create(rm, cat, mmio, DPU_HW_BLK_PINGPONG,
> cat->pingpong[i].id, &cat->pingpong[i]);
> @@ -516,20 +498,16 @@ static bool _dpu_rm_check_lm_and_get_connected_blks(
> struct dpu_rm_rsvp *rsvp,
> struct dpu_rm_requirements *reqs,
> struct dpu_rm_hw_blk *lm,
> - struct dpu_rm_hw_blk **ds,
> struct dpu_rm_hw_blk **pp,
> struct dpu_rm_hw_blk *primary_lm)
> {
> const struct dpu_lm_cfg *lm_cfg = to_dpu_hw_mixer(lm->hw)->cap;
> struct dpu_rm_hw_iter iter;
> - bool is_valid_ds;
>
> - *ds = NULL;
> *pp = NULL;
>
> - DPU_DEBUG("check lm %d ds %d pp %d\n",
> - lm_cfg->id,
> - lm_cfg->ds, lm_cfg->pingpong);
> + DPU_DEBUG("check lm %d pp %d\n",
> + lm_cfg->id, lm_cfg->pingpong);
>
> /* Check if this layer mixer is a peer of the proposed primary LM */
> if (primary_lm) {
> @@ -543,43 +521,12 @@ static bool _dpu_rm_check_lm_and_get_connected_blks(
> }
> }
>
> - is_valid_ds = (lm_cfg->ds != DS_MAX) ? true : false;
> -
> - if (RM_RQ_DS(reqs) && !is_valid_ds) {
> - DPU_DEBUG("fail:lm(%d)req_ds(%d)ds(%d)\n",
> - lm_cfg->id, (bool)(RM_RQ_DS(reqs)), lm_cfg->ds);
> -
> - return false;
> - }
> -
> /* Already reserved? */
> if (RESERVED_BY_OTHER(lm, rsvp)) {
> DPU_DEBUG("lm %d already reserved\n", lm_cfg->id);
> return false;
> }
>
> - if (lm_cfg->ds != DS_MAX) {
> - dpu_rm_init_hw_iter(&iter, 0, DPU_HW_BLK_DS);
> - while (_dpu_rm_get_hw_locked(rm, &iter)) {
> - if (iter.blk->id == lm_cfg->ds) {
> - *ds = iter.blk;
> - break;
> - }
> - }
> -
> - if (!*ds) {
> - DPU_DEBUG("lm %d failed to retrieve ds %d\n", lm->id,
> - lm_cfg->ds);
> - return false;
> - }
> -
> - if (RESERVED_BY_OTHER(*ds, rsvp)) {
> - DPU_DEBUG("lm %d ds %d already reserved\n",
> - lm->id, (*ds)->id);
> - return false;
> - }
> - }
> -
> dpu_rm_init_hw_iter(&iter, 0, DPU_HW_BLK_PINGPONG);
> while (_dpu_rm_get_hw_locked(rm, &iter)) {
> if (iter.blk->id == lm_cfg->pingpong) {
> @@ -596,7 +543,6 @@ static bool _dpu_rm_check_lm_and_get_connected_blks(
> if (RESERVED_BY_OTHER(*pp, rsvp)) {
> DPU_DEBUG("lm %d pp %d already reserved\n", lm->id,
> (*pp)->id);
> - *ds = NULL;
> return false;
> }
>
> @@ -610,7 +556,6 @@ static int _dpu_rm_reserve_lms(
>
> {
> struct dpu_rm_hw_blk *lm[MAX_BLOCKS];
> - struct dpu_rm_hw_blk *ds[MAX_BLOCKS];
> struct dpu_rm_hw_blk *pp[MAX_BLOCKS];
> struct dpu_rm_hw_iter iter_i, iter_j;
> int lm_count = 0;
> @@ -626,14 +571,13 @@ static int _dpu_rm_reserve_lms(
> while (lm_count != reqs->topology->num_lm &&
> _dpu_rm_get_hw_locked(rm, &iter_i)) {
> memset(&lm, 0, sizeof(lm));
> - memset(&ds, 0, sizeof(ds));
> memset(&pp, 0, sizeof(pp));
>
> lm_count = 0;
> lm[lm_count] = iter_i.blk;
>
> if (!_dpu_rm_check_lm_and_get_connected_blks(
> - rm, rsvp, reqs, lm[lm_count], &ds[lm_count],
> + rm, rsvp, reqs, lm[lm_count],
> &pp[lm_count], NULL))
> continue;
>
> @@ -649,8 +593,7 @@ static int _dpu_rm_reserve_lms(
>
> if (!_dpu_rm_check_lm_and_get_connected_blks(
> rm, rsvp, reqs, iter_j.blk,
> - &ds[lm_count], &pp[lm_count],
> - iter_i.blk))
> + &pp[lm_count], iter_i.blk))
> continue;
>
> lm[lm_count] = iter_j.blk;
> @@ -670,11 +613,7 @@ static int _dpu_rm_reserve_lms(
> lm[i]->rsvp_nxt = rsvp;
> pp[i]->rsvp_nxt = rsvp;
>
> - if (ds[i])
> - ds[i]->rsvp_nxt = rsvp;
> -
> - DPU_EVT32(lm[i]->type, rsvp->enc_id, lm[i]->id, pp[i]->id,
> - ds[i] ? ds[i]->id : 0);
> + DPU_EVT32(lm[i]->type, rsvp->enc_id, lm[i]->id, pp[i]->id);
> }
>
> return rc;
> diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
> index 5baff27..8e80b4b 100644
> --- a/drivers/gpu/drm/msm/msm_drv.h
> +++ b/drivers/gpu/drm/msm/msm_drv.h
> @@ -89,25 +89,10 @@ enum msm_mdp_plane_property {
>
> enum msm_mdp_crtc_property {
> CRTC_PROP_INFO,
> - CRTC_PROP_DEST_SCALER_LUT_ED,
> - CRTC_PROP_DEST_SCALER_LUT_CIR,
> - CRTC_PROP_DEST_SCALER_LUT_SEP,
>
> /* # of blob properties */
> CRTC_PROP_BLOBCOUNT,
>
> - /* range properties */
> - CRTC_PROP_DIM_LAYER_V1 = CRTC_PROP_BLOBCOUNT,
> - CRTC_PROP_CORE_CLK,
> - CRTC_PROP_CORE_AB,
> - CRTC_PROP_CORE_IB,
> - CRTC_PROP_LLCC_AB,
> - CRTC_PROP_LLCC_IB,
> - CRTC_PROP_DRAM_AB,
> - CRTC_PROP_DRAM_IB,
> - CRTC_PROP_IDLE_TIMEOUT,
> - CRTC_PROP_DEST_SCALER,
> -
> /* total # of properties */
> CRTC_PROP_COUNT
> };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
--
Sean Paul, Software Engineer, Google / Chromium OS
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
