Re: [PATCH 1/2] thermal: tsens: Add support for SDM845 platform

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 06/02/2018 04:41 PM, Amit Kucheria wrote:
> There are two tsens blocks on the SDM845. These will be configured through
> the devicetree.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/thermal/qcom-tsens.txt     |  1 +
>  drivers/thermal/qcom/Makefile                      |  2 +-
>  drivers/thermal/qcom/tsens-sdm845.c                | 98 ++++++++++++++++++++++
>  drivers/thermal/qcom/tsens.c                       |  3 +
>  drivers/thermal/qcom/tsens.h                       |  1 +
>  5 files changed, 104 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/thermal/qcom/tsens-sdm845.c
> 
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> index 292ed89..8652499 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> @@ -5,6 +5,7 @@ Required properties:
>   - "qcom,msm8916-tsens" : For 8916 Family of SoCs
>   - "qcom,msm8974-tsens" : For 8974 Family of SoCs
>   - "qcom,msm8996-tsens" : For 8996 Family of SoCs
> + - "qcom,sdm845-tsens"  : For SDM845 Family of SoCs
>  
>  - reg: Address range of the thermal registers
>  - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
> diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
> index 2cc2193..dc9f169 100644
> --- a/drivers/thermal/qcom/Makefile
> +++ b/drivers/thermal/qcom/Makefile
> @@ -1,2 +1,2 @@
>  obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
> -qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o
> +qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o tsens-sdm845.o
> diff --git a/drivers/thermal/qcom/tsens-sdm845.c b/drivers/thermal/qcom/tsens-sdm845.c
> new file mode 100644
> index 0000000..5d78f0b
> --- /dev/null
> +++ b/drivers/thermal/qcom/tsens-sdm845.c
> @@ -0,0 +1,98 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018, Linaro Limited
> + */
> +
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include "tsens.h"
> +
> +#define CNTL_OFFSET	4
> +/* CNTL_OFFSET bitmasks */
> +#define EN		BIT(0)
> +#define SW_RST		BIT(1)
> +
> +#define SENSOR0_SHIFT	3
> +
> +#define TRDY_OFFSET     0xe4
> +#define TRDY_READY_BIT  BIT(1)
> +
> +#define STATUS_OFFSET	0xa0
> +#define LAST_TEMP_MASK	0xfff
> +#define STATUS_VALID_BIT	BIT(21)
> +#define CODE_SIGN_BIT		BIT(11)
> +
> +static int get_temp_sdm845(struct tsens_device *tmdev, int id, int *temp)
> +{
> +	struct tsens_sensor *s = &tmdev->sensor[id];
> +	u32 code;
> +	unsigned int sensor_addr;
> +	int last_temp = 0, last_temp2 = 0, last_temp3 = 0, ret;
> +
> +	ret = regmap_read(tmdev->map, TRDY_OFFSET, &code);
> +	if (ret)
> +		return ret;
> +	if (code & TRDY_READY_BIT)
> +		return -ENODATA;
> +
> +	sensor_addr = STATUS_OFFSET + s->hw_id * 4;
> +	ret = regmap_read(tmdev->map, sensor_addr, &code);
> +	if (ret)
> +		return ret;
> +	last_temp = code & LAST_TEMP_MASK;
> +	if (code & STATUS_VALID_BIT)
> +		goto done;
> +
> +	/* Try a second time */
> +	ret = regmap_read(tmdev->map, sensor_addr, &code);
> +	if (ret)
> +		return ret;
> +	if (code & STATUS_VALID_BIT) {
> +		last_temp = code & LAST_TEMP_MASK;
> +		goto done;
> +	} else {
> +		last_temp2 = code & LAST_TEMP_MASK;
> +	}
> +
> +	/* Try a third/last time */
> +	ret = regmap_read(tmdev->map, sensor_addr, &code);
> +	if (ret)
> +		return ret;
> +	if (code & STATUS_VALID_BIT) {
> +		last_temp = code & LAST_TEMP_MASK;
> +		goto done;
> +	} else {
> +		last_temp3 = code & LAST_TEMP_MASK;
> +	}
> +
> +	if (last_temp == last_temp2)
> +		last_temp = last_temp2;
> +	else if (last_temp2 == last_temp3)
> +		last_temp = last_temp3;
> +done:
> +	/* Code sign bit is the sign extension for a negative value */
> +	if (last_temp & CODE_SIGN_BIT)
> +		last_temp |= ~CODE_SIGN_BIT;
> +
> +	/* Temperatures are in deciCelicius */
> +	*temp = last_temp * 100;

This looks the same as what we do for 8996. Does it make sense to move this
to tsens-common and reuse in both 8996 and 845?

> +
> +	return 0;
> +}
> +
> +static const struct regmap_config tsens_config = {
> +	.reg_bits	= 32,
> +	.val_bits	= 32,
> +	.reg_stride	= 4,
> +};
> +
> +
> +static const struct tsens_ops ops_sdm845 = {
> +  	.init		= init_common,
> +	.get_temp	= get_temp_sdm845,
> +};
> +
> +const struct tsens_data data_sdm845 = {
> +	.ops		= &ops_sdm845,
> +};
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index 3f9fe6a..314a20f 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -72,6 +72,9 @@ static const struct of_device_id tsens_table[] = {
>  	}, {
>  		.compatible = "qcom,msm8996-tsens",
>  		.data = &data_8996,
> +	}, {
> +		.compatible = "qcom,sdm845-tsens",
> +		.data = &data_sdm845,
>  	},
>  	{}
>  };
> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> index 911c197..f15660d 100644
> --- a/drivers/thermal/qcom/tsens.h
> +++ b/drivers/thermal/qcom/tsens.h
> @@ -90,5 +90,6 @@ int init_common(struct tsens_device *);
>  int get_temp_common(struct tsens_device *, int, int *);
>  
>  extern const struct tsens_data data_8916, data_8974, data_8960, data_8996;
> +extern const struct tsens_data data_sdm845;
>  
>  #endif /* __QCOM_TSENS_H__ */
> 

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux