Quoting Amit Nischal (2018-05-28 23:07:46) > There are certain clocks which needs to be always enabled for system > operation. Remove support for such clocks from the clock driver and > enable them explicitly gcc driver probe. Also fix the target name in > kernel configuration description for SDM845 gcc driver. This is why we have CLK_IS_CRITICAL. > > Signed-off-by: Amit Nischal <anischal@xxxxxxxxxxxxxx> > --- > diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig > index fc3edd1..79e9144 100644 > --- a/drivers/clk/qcom/Kconfig > +++ b/drivers/clk/qcom/Kconfig > @@ -231,7 +231,7 @@ config SDM_GCC_845 > select QCOM_GDSC > depends on COMMON_CLK_QCOM > help > - Support for the global clock controller on msm8998 devices. > + Support for the global clock controller on SDM845 devices. > Say Y if you want to use peripheral devices such as UART, SPI, > I2C, USB, UFS, SDDC, PCIe, etc. > This can be its own patch. > diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c > index e78e6f5..b40aafc 100644 > --- a/drivers/clk/qcom/gcc-sdm845.c > +++ b/drivers/clk/qcom/gcc-sdm845.c > @@ -3433,9 +3327,16 @@ static int gcc_sdm845_probe(struct platform_device *pdev) > regmap_update_bits(regmap, 0x09ffc, 0x3, 0x3); > regmap_update_bits(regmap, 0x71028, 0x3, 0x3); > > - /* Enable CPUSS clocks */ > - regmap_update_bits(regmap, 0x48190, BIT(0), 0x1); > - regmap_update_bits(regmap, 0x52004, BIT(22), 0x1); > + /* Enable clocks which are required to be always ON */ > + regmap_update_bits(regmap, 0xb004, BIT(0), BIT(0)); > + regmap_update_bits(regmap, 0xb008, BIT(0), BIT(0)); > + regmap_update_bits(regmap, 0xb00c, BIT(0), BIT(0)); > + regmap_update_bits(regmap, 0xb028, BIT(0), BIT(0)); > + regmap_update_bits(regmap, 0xb02c, BIT(0), BIT(0)); > + regmap_update_bits(regmap, 0xb030, BIT(0), BIT(0)); > + regmap_update_bits(regmap, 0x48190, BIT(0), BIT(0)); > + regmap_update_bits(regmap, 0x52004, BIT(22), BIT(22)); > + regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0)); Let's do CLK_IS_CRITICAL flag instead. That has the added benefit of checking to make sure the halt bit toggles correctly so the clks are verified to be enabled. > > return qcom_cc_really_probe(pdev, &gcc_sdm845_desc, regmap); > } > diff --git a/include/dt-bindings/clock/qcom,gcc-sdm845.h b/include/dt-bindings/clock/qcom,gcc-sdm845.h > index aca6126..6330c3f 100644 > --- a/include/dt-bindings/clock/qcom,gcc-sdm845.h > +++ b/include/dt-bindings/clock/qcom,gcc-sdm845.h > @@ -13,185 +13,178 @@ > #define GCC_AGGRE_USB3_PRIM_AXI_CLK 3 > #define GCC_AGGRE_USB3_SEC_AXI_CLK 4 > #define GCC_BOOT_ROM_AHB_CLK 5 > -#define GCC_CAMERA_AHB_CLK 6 Don't do this. Things should only be added to here, not removed or reshuffled. > -#define GCC_CAMERA_AXI_CLK 7 > -#define GCC_CAMERA_XO_CLK 8 > -#define GCC_CE1_AHB_CLK 9 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
