On Wed, May 23, 2018 at 06:44:00PM -0700, Abhinav Kumar wrote:
> Add support for Truly NT35597 panel used
> in MSM reference platforms.
>
> This panel supports both single DSI and dual DSI
> modes.
>
> However, this patch series adds support only for
> dual DSI mode.
>
> Changes in v3:
> - Changes to commit text
> - Separated the documentation from the driver itself
> - Improved the documentation to cover the port information
> - Formatting fixes and changes in delays in panel sequences
> - Cleaned up probe function
>
> Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
> Signed-off-by: Abhinav Kumar <abhinavk@xxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/panel/Kconfig | 8 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-truly-nt35597.c | 588 ++++++++++++++++++++++++++++
> 3 files changed, 597 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-truly-nt35597.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 25682ff..2fcd9b1 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -177,4 +177,12 @@ config DRM_PANEL_SITRONIX_ST7789V
> Say Y here if you want to enable support for the Sitronix
> ST7789V controller for 240x320 LCD panels
>
> +config DRM_PANEL_TRULY_NT35597_WQXGA
> + tristate "Truly WQXGA"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + select VIDEOMODE_HELPERS
> + help
> + Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
> + Video Mode panel
> endmenu
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index f26efc1..056ea93 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -18,3 +18,4 @@ obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o
> obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
> obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> +obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
> diff --git a/drivers/gpu/drm/panel/panel-truly-nt35597.c b/drivers/gpu/drm/panel/panel-truly-nt35597.c
> new file mode 100644
> index 0000000..529086b
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-truly-nt35597.c
> @@ -0,0 +1,588 @@
> +// SPDX-License-Identifier: GPL-2.0
I know I prefer
/* SPDX-License-Identifier: GPL-2.0 */
but I haven't seen a definitive rulling one way or the other.
> +/* Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
One of the points of the SPDX tag is that you don't need to print the text of
the license anymore - just add the tag and the copyright notice.
> +#include <linux/gpio/consumer.h>
> +#include <linux/of_graph.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/pinctrl/consumer.h>
> +
> +#include <video/mipi_display.h>
> +#include <video/of_videomode.h>
> +#include <video/videomode.h>
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_mipi_dsi.h>
> +
> +static const char * const regulator_names[] = {
> + "vdda",
> + "vdispp",
> + "vdispn"
> +};
> +
> +static unsigned long regulator_enable_loads[] = {
> + 62000,
> + 100000,
> + 100000
Missing a comma after the last entry. These should be const if you can make them
so.
> +};
> +
> +static unsigned long regulator_disable_loads[] = {
> + 80,
> + 100,
> + 100
Same.
> +};
> +
> +struct truly_wqxga {
> + struct device *dev;
> + struct drm_panel panel;
> +
> + struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)];
> +
> + struct gpio_desc *reset_gpio;
> + struct gpio_desc *mode_gpio;
> +
> + struct backlight_device *backlight;
> + struct videomode vm;
> +
> + struct mipi_dsi_device *dsi[2];
> +
> + bool prepared;
> + bool enabled;
> +};
> +
> +static inline struct truly_wqxga *panel_to_truly_wqxga(struct drm_panel *panel)
> +{
> + return container_of(panel, struct truly_wqxga, panel);
> +}
Personal preference for me is to make these a macro since they take up less
space, but I'll leave the final decision to the maintainer.
> +static int truly_wqxga_power_on(struct truly_wqxga *ctx)
> +{
> + int ret, i;
> +
> + for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) {
> + ret = regulator_set_load(ctx->supplies[i].consumer,
> + regulator_enable_loads[i]);
> + if (ret)
> + return ret;
> + }
> *
> + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> + if (ret < 0)
> + return ret;
> +
> + msleep(20);
> + gpiod_set_value(ctx->reset_gpio, 1);
> + msleep(20);
> + gpiod_set_value(ctx->reset_gpio, 0);
> + msleep(20);
> + gpiod_set_value(ctx->reset_gpio, 1);
> + msleep(50);
> +
> + return 0;
> +}
> +
> +static int truly_wqxga_power_off(struct truly_wqxga *ctx)
> +{
> + int ret, i;
> +
> + gpiod_set_value(ctx->reset_gpio, 0);
> +
> + for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) {
> + ret = regulator_set_load(ctx->supplies[i].consumer,
> + regulator_disable_loads[i]);
> + if (ret)
> + return ret;
> + }
> +
> + return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> +}
> +
> +static int truly_wqxga_disable(struct drm_panel *panel)
> +{
> + struct truly_wqxga *ctx = panel_to_truly_wqxga(panel);
> +
> + if (!ctx->enabled)
> + return 0;
> +
> + if (ctx->backlight) {
> + ctx->backlight->props.power = FB_BLANK_POWERDOWN;
> + backlight_update_status(ctx->backlight);
> + }
> +
> + ctx->enabled = false;
> + return 0;
> +}
> +
> +static int truly_wqxga_unprepare(struct drm_panel *panel)
> +{
> + struct truly_wqxga *ctx = panel_to_truly_wqxga(panel);
> + struct mipi_dsi_device **dsis = ctx->dsi;
> + int ret = 0, i;
> +
> + if (!ctx->prepared)
> + return 0;
> +
> + dsis[0]->mode_flags = 0;
> + dsis[1]->mode_flags = 0;
> +
> + for (i = 0; i < 2; i++)
> + if (mipi_dsi_dcs_set_display_off(dsis[i]) < 0)
> + ret = -ECOMM;
> +
> + msleep(120);
> +
> + for (i = 0; i < 2; i++)
> + if (mipi_dsi_dcs_enter_sleep_mode(dsis[i]) < 0)
> + ret = -ECOMM;
> +
> + truly_wqxga_power_off(ctx);
> +
> + ctx->prepared = false;
> + return ret;
> +}
> +
> +#define MAX_LEN 5
> +struct {
> + u8 commands[MAX_LEN];
> + int size;
> +} panel_cmds[] = { /* CMD2_P0 */
> + { { 0xff, 0x20 }, 2 },
> + { { 0xfb, 0x01 }, 2 },
> + { { 0x00, 0x01 }, 2 },
> + { { 0x01, 0x55 }, 2 },
> + { { 0x02, 0x45 }, 2 },
> + { { 0x05, 0x40 }, 2 },
> + { { 0x06, 0x19 }, 2 },
> + { { 0x07, 0x1e }, 2 },
> + { { 0x0b, 0x73 }, 2 },
> + { { 0x0c, 0x73 }, 2 },
> + { { 0x0e, 0xb0 }, 2 },
> + { { 0x0f, 0xae }, 2 },
> + { { 0x11, 0xb8 }, 2 },
> + { { 0x13, 0x00 }, 2 },
> + { { 0x58, 0x80 }, 2 },
> + { { 0x59, 0x01 }, 2 },
> + { { 0x5a, 0x00 }, 2 },
> + { { 0x5b, 0x01 }, 2 },
> + { { 0x5c, 0x80 }, 2 },
> + { { 0x5d, 0x81 }, 2 },
> + { { 0x5e, 0x00 }, 2 },
> + { { 0x5f, 0x01 }, 2 },
> + { { 0x72, 0x11 }, 2 },
> + { { 0x68, 0x03 }, 2 },
> + /* CMD2_P4 */
> + { { 0xFF, 0x24 }, 2 },
> + { { 0xFB, 0x01 }, 2 },
> + { { 0x00, 0x1C }, 2 },
> + { { 0x01, 0x0B }, 2 },
> + { { 0x02, 0x0C }, 2 },
> + { { 0x03, 0x01 }, 2 },
> + { { 0x04, 0x0F }, 2 },
> + { { 0x05, 0x10 }, 2 },
> + { { 0x06, 0x10 }, 2 },
> + { { 0x07, 0x10 }, 2 },
> + { { 0x08, 0x89 }, 2 },
> + { { 0x09, 0x8A }, 2 },
> + { { 0x0A, 0x13 }, 2 },
> + { { 0x0B, 0x13 }, 2 },
> + { { 0x0C, 0x15 }, 2 },
> + { { 0x0D, 0x15 }, 2 },
> + { { 0x0E, 0x17 }, 2 },
> + { { 0x0F, 0x17 }, 2 },
> + { { 0x10, 0x1C }, 2 },
> + { { 0x11, 0x0B }, 2 },
> + { { 0x12, 0x0C }, 2 },
> + { { 0x13, 0x01 }, 2 },
> + { { 0x14, 0x0F }, 2 },
> + { { 0x15, 0x10 }, 2 },
> + { { 0x16, 0x10 }, 2 },
> + { { 0x17, 0x10 }, 2 },
> + { { 0x18, 0x89 }, 2 },
> + { { 0x19, 0x8A }, 2 },
> + { { 0x1A, 0x13 }, 2 },
> + { { 0x1B, 0x13 }, 2 },
> + { { 0x1C, 0x15 }, 2 },
> + { { 0x1D, 0x15 }, 2 },
> + { { 0x1E, 0x17 }, 2 },
> + { { 0x1F, 0x17 }, 2 },
> + /* STV */
> + { { 0x20, 0x40 }, 2 },
> + { { 0x21, 0x01 }, 2 },
> + { { 0x22, 0x00 }, 2 },
> + { { 0x23, 0x40 }, 2 },
> + { { 0x24, 0x40 }, 2 },
> + { { 0x25, 0x6D }, 2 },
> + { { 0x26, 0x40 }, 2 },
> + { { 0x27, 0x40 }, 2 },
> + /* Vend */
> + { { 0xE0, 0x00 }, 2 },
> + { { 0xDC, 0x21 }, 2 },
> + { { 0xDD, 0x22 }, 2 },
> + { { 0xDE, 0x07 }, 2 },
> + { { 0xDF, 0x07 }, 2 },
> + { { 0xE3, 0x6D }, 2 },
> + { { 0xE1, 0x07 }, 2 },
> + { { 0xE2, 0x07 }, 2 },
> + /* UD */
> + { { 0x29, 0xD8 }, 2 },
> + { { 0x2A, 0x2A }, 2 },
> + /* CLK */
> + { { 0x4B, 0x03 }, 2 },
> + { { 0x4C, 0x11 }, 2 },
> + { { 0x4D, 0x10 }, 2 },
> + { { 0x4E, 0x01 }, 2 },
> + { { 0x4F, 0x01 }, 2 },
> + { { 0x50, 0x10 }, 2 },
> + { { 0x51, 0x00 }, 2 },
> + { { 0x52, 0x80 }, 2 },
> + { { 0x53, 0x00 }, 2 },
> + { { 0x56, 0x00 }, 2 },
> + { { 0x54, 0x07 }, 2 },
> + { { 0x58, 0x07 }, 2 },
> + { { 0x55, 0x25 }, 2 },
> + /* Reset XDONB */
> + { { 0x5B, 0x43 }, 2 },
> + { { 0x5C, 0x00 }, 2 },
> + { { 0x5F, 0x73 }, 2 },
> + { { 0x60, 0x73 }, 2 },
> + { { 0x63, 0x22 }, 2 },
> + { { 0x64, 0x00 }, 2 },
> + { { 0x67, 0x08 }, 2 },
> + { { 0x68, 0x04 }, 2 },
> + /* Resolution:1440x2560 */
> + { { 0x72, 0x02 }, 2 },
> + /* mux */
> + { { 0x7A, 0x80 }, 2 },
> + { { 0x7B, 0x91 }, 2 },
> + { { 0x7C, 0xD8 }, 2 },
> + { { 0x7D, 0x60 }, 2 },
> + { { 0x7F, 0x15 }, 2 },
> + { { 0x75, 0x15 }, 2 },
> + /* ABOFF */
> + { { 0xB3, 0xC0 }, 2 },
> + { { 0xB4, 0x00 }, 2 },
> + { { 0xB5, 0x00 }, 2 },
> + /* Source EQ */
> + { { 0x78, 0x00 }, 2 },
> + { { 0x79, 0x00 }, 2 },
> + { { 0x80, 0x00 }, 2 },
> + { { 0x83, 0x00 }, 2 },
> + /* FP BP */
> + { { 0x93, 0x0A }, 2 },
> + { { 0x94, 0x0A }, 2 },
> + /* Inversion Type */
> + { { 0x8A, 0x00 }, 2 },
> + { { 0x9B, 0xFF }, 2 },
> + /* IMGSWAP =1 @PortSwap=1 */
> + { { 0x9D, 0xB0 }, 2 },
> + { { 0x9F, 0x63 }, 2 },
> + { { 0x98, 0x10 }, 2 },
> + /* FRM */
> + { { 0xEC, 0x00 }, 2 },
> + /* CMD1 */
> + { { 0xFF, 0x10 }, 2 },
> + /* VBP+VSA=,VFP = 10H */
> + { { 0x3B, 0x03, 0x0A, 0x0A, }, 4 },
> + /* FTE on */
> + { { 0x35, 0x00 }, 2 },
> + /* EN_BK =1(auto black) */
> + { { 0xE5, 0x01 }, 2 },
> + /* CMD mode(10) VDO mode(03) */
> + { { 0xBB, 0x03 }, 2 },
> + /* Non Reload MTP */
> + { { 0xFB, 0x01 }, 2 },
> +};
> +
> +static int truly_wqxga_prepare(struct drm_panel *panel)
> +{
> + struct truly_wqxga *ctx = panel_to_truly_wqxga(panel);
> + struct mipi_dsi_device **dsis = ctx->dsi;
> + struct mipi_dsi_device *d;
> + int ret, i, j;
> +
> + if (ctx->prepared)
> + return 0;
> +
> + ret = truly_wqxga_power_on(ctx);
> + if (ret < 0)
> + return ret;
> +
> + dsis[0]->mode_flags |= MIPI_DSI_MODE_LPM;
> + dsis[1]->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + for (j = 0; j < ARRAY_SIZE(panel_cmds); j++) {
> + for (i = 0; i < 2; i++) {
> + d = dsis[i];
d appears to be unused.
> + ret = mipi_dsi_dcs_write_buffer(dsis[i],
> + panel_cmds[j].commands,
> + panel_cmds[j].size);
> + if (ret < 0) {
> + dev_err(ctx->dev, "failed to cmd no %d, err: %d\n",
This is a fairly opaque error message. I think no is short for "number" but
this could use a bit of rewrite.
> + j, ret);
> + return ret;
> + }
> + }
> + }
> +
> + for (i = 0; i < 2; i++)
> + if (mipi_dsi_dcs_exit_sleep_mode(dsis[i]) < 0) {
> + dev_err(ctx->dev, "failed to exit sleep mode\n");
> + return -ECOMM;
> + }
I would prefer brackets for the for loop too.
> + msleep(78);
> +
> + for (i = 0; i < 2; i++)
> + if (mipi_dsi_dcs_set_display_on(dsis[i]) < 0) {
> + dev_err(ctx->dev, "failed to send display on\n");
> + return -ECOMM;
> + }
> + msleep(78);
> +
> + ctx->prepared = true;
> +
> + return 0;
> +}
> +
> +static int truly_wqxga_enable(struct drm_panel *panel)
> +{
> + struct truly_wqxga *ctx = panel_to_truly_wqxga(panel);
> +
> + if (ctx->enabled)
> + return 0;
> +
> + if (ctx->backlight) {
> + ctx->backlight->props.power = FB_BLANK_UNBLANK;
> + backlight_update_status(ctx->backlight);
> + }
> + ctx->enabled = true;
> +
> + return 0;
> +}
> +
> +static int truly_wqxga_get_modes(struct drm_panel *panel)
> +{
> + struct drm_connector *connector = panel->connector;
> + struct truly_wqxga *ctx = panel_to_truly_wqxga(panel);
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_create(connector->dev);
> + if (!mode) {
> + dev_err(ctx->dev, "failed to create a new display mode\n");
> + return 0;
> + }
> +
> + drm_display_mode_from_videomode(&ctx->vm, mode);
> + connector->display_info.width_mm = 74;
> + connector->display_info.height_mm = 131;
> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> + drm_mode_probed_add(connector, mode);
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs truly_wqxga_drm_funcs = {
> + .disable = truly_wqxga_disable,
> + .unprepare = truly_wqxga_unprepare,
> + .prepare = truly_wqxga_prepare,
> + .enable = truly_wqxga_enable,
> + .get_modes = truly_wqxga_get_modes,
> +};
> +
> +static int truly_wqxga_panel_add(struct truly_wqxga *ctx)
> +{
> + struct device *dev = ctx->dev;
> + int ret, i;
> +
> + for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++)
> + ctx->supplies[i].supply = regulator_names[i];
> +
> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
> + ctx->supplies);
> + if (ret < 0)
> + return ret;
> +
> + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(ctx->reset_gpio)) {
> + dev_err(dev, "cannot get reset-gpios %ld\n",
The name here doesn't match the gpio you are trying to get.
> + PTR_ERR(ctx->reset_gpio));
> + return PTR_ERR(ctx->reset_gpio);
> + }
> +
> + ctx->mode_gpio = devm_gpiod_get(dev, "mode", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->mode_gpio)) {
> + dev_err(dev, "cannot get mode gpio %ld\n",
This is a little bit better.
> + PTR_ERR(ctx->mode_gpio));
> + ctx->mode_gpio = NULL;
Oops, you are setting this to null, and then returning PTR_ERR for the NULL,
which will be 0.
> + return PTR_ERR(ctx->mode_gpio);
> + }
> +
> + /* dual port */
> + gpiod_set_value(ctx->mode_gpio, 0);
> +
> + ret = of_get_videomode(dev->of_node, &ctx->vm, 0);
> + if (ret < 0)
> + return ret;
> +
> + drm_panel_init(&ctx->panel);
> + ctx->panel.dev = dev;
> + ctx->panel.funcs = &truly_wqxga_drm_funcs;
> + drm_panel_add(&ctx->panel);
> +
> + return 0;
> +}
> +
> +static void truly_wqxga_panel_del(struct truly_wqxga *ctx)
> +{
> + if (ctx->panel.dev)
> + drm_panel_remove(&ctx->panel);
> +}
> +
> +static int truly_wqxga_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct truly_wqxga *ctx;
> + struct mipi_dsi_device *secondary;
> + struct device_node *dsi1;
> + struct mipi_dsi_host *dsi1_host;
> + int ret = 0;
> + const struct mipi_dsi_device_info info = {.type = "trulynt35597",
> + .channel = 0,
> + .node = NULL,
> + };
> +
> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> +
> + if (!ctx) {
> + ret = -ENOMEM;
> + goto err_dsi_ctx;
I say, just return -ENOMEM;
> + }
> +
> + /* This device represents itself as one with
> + * two input ports which are fed by the output
> + * ports of the two DSI controllers . The DSI0
> + * is the master controller and has most of the
> + * panel related info in its child node.
> + */
> +
> + dsi1 = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
> + if (!dsi1) {
> + dev_err(dev, "failed to get remote node for secondary DSI\n");
> + ret = -ENODEV;
> + goto err_get_remote;
> + }
> +
> + dsi1_host = of_find_mipi_dsi_host_by_node(dsi1);
> + if (!dsi1_host) {
> + dev_err(dev, "failed to find dsi host\n");
> + ret = -EPROBE_DEFER;
> + goto err_host;
> + }
> +
> + of_node_put(dsi1);
> +
> + /* register the second DSI device */
> + secondary = mipi_dsi_device_register_full(dsi1_host, &info);
> +
> + if (IS_ERR(secondary)) {
> + dev_err(dev, "failed to create dsi device\n");
> + ret = PTR_ERR(dsi);
> + goto err_dsi_device;
> + }
> +
> + mipi_dsi_set_drvdata(dsi, ctx);
> +
> + ctx->dev = dev;
> + ctx->dsi[0] = dsi;
> + ctx->dsi[1] = secondary;
> +
> + ret = truly_wqxga_panel_add(ctx);
> + if (ret) {
> + dev_err(dev, "failed to add panel\n");
> + goto err_panel_add;
> + }
> +
> + /* configure master DSI device */
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_CLOCK_NON_CONTINUOUS |
> + MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0) {
> + dev_err(dev, "master dsi attach failed\n");
> + goto err_dsi_attach;
> + }
> +
> + /* configure secondary DSI device */
> + secondary->lanes = 4;
> + secondary->format = MIPI_DSI_FMT_RGB888;
> + secondary->mode_flags = MIPI_DSI_MODE_VIDEO |
> + MIPI_DSI_CLOCK_NON_CONTINUOUS |
> + MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_attach(secondary);
> + if (ret < 0) {
> + dev_err(dev, "mipi_dsi_attach on secondary failed\n");
> + goto err_dsi_attach_sec;
> + }
> +
> + return 0;
> +
> +err_dsi_attach_sec:
> + mipi_dsi_detach(ctx->dsi[0]);
> +err_dsi_attach:
> + truly_wqxga_panel_del(ctx);
> +err_panel_add:
> + mipi_dsi_device_unregister(secondary);
> +err_dsi_device:
> +err_host:
> + of_node_put(dsi1);
> +err_get_remote:
> +err_dsi_ctx:
> + return ret;
> +}
> +
> +static int truly_wqxga_remove(struct mipi_dsi_device *dsi)
> +{
> + struct truly_wqxga *ctx = mipi_dsi_get_drvdata(dsi);
> +
> + if (ctx->dsi[0])
> + mipi_dsi_detach(ctx->dsi[0]);
> + if (ctx->dsi[1]) {
> + mipi_dsi_detach(ctx->dsi[1]);
> + mipi_dsi_device_unregister(ctx->dsi[1]);
> + }
> + truly_wqxga_panel_del(ctx);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id truly_wqxga_of_match[] = {
> + { .compatible = "truly,nt35597", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, truly_wqxga_of_match);
> +
> +static struct mipi_dsi_driver truly_wqxga_driver = {
> + .driver = {
> + .name = "panel_truly_nt35597",
> + .of_match_table = truly_wqxga_of_match,
> + },
> + .probe = truly_wqxga_probe,
> + .remove = truly_wqxga_remove,
> +};
> +module_mipi_dsi_driver(truly_wqxga_driver);
> +
> +MODULE_DESCRIPTION("Truly NT35597 DSI Panel Driver");
> +MODULE_LICENSE("GPL v2");
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
