On 2018-05-22 12:17, Miquel Raynal wrote:
Hi Abhishek,
On Thu, 3 May 2018 17:50:32 +0530, Abhishek Sahu
<absahu@xxxxxxxxxxxxxx> wrote:
The BAM has 3 channels - tx, rx and command. command channel
is used for register read/writes, tx channel for data writes
and rx channel for data reads. Currently, the driver assumes the
transfer completion once it gets all the command descriptor
completed. Sometimes, there is race condition in data channel
"Sometimes, there is a race condition between the data channel (rx/tx)
and the command channel completion. In these cases, ..."
(tx/rx) and command channel completion and in these cases,
the data in buffer is not valid during the small window between
^ present in the buffer ?
command descriptor completion and data descriptor completion.
Now, the changes have been made to assign the callback for
It is preferable to use a descriptive tense when you expose what the
patch does. Something like "Change <this> to assign ..."
Thanks Miquel for your review.
I will change the sentence.
channel's final descriptor. The DMA will generate the callback
when all the descriptors have completed in that channel.
The NAND transfer will be completed only when all required
DMA channels have generated the completion callback.
It looks like this is a fix that is a good candidate for stable trees,
you might want to add the relevant tags.
Sure. I will add the relevant tags.
Signed-off-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
---
* Changes from v1:
NONE
1. Removed the custom logic and used the helper fuction.
drivers/mtd/nand/raw/qcom_nandc.c | 55
++++++++++++++++++++++++++++++++++++++-
1 file changed, 54 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c
b/drivers/mtd/nand/raw/qcom_nandc.c
index a8d71ce..3d1ff54 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -213,6 +213,8 @@
#define QPIC_PER_CW_CMD_SGL 32
#define QPIC_PER_CW_DATA_SGL 8
+#define QPIC_NAND_COMPLETION_TIMEOUT msecs_to_jiffies(2000)
That's huge, but why not, it's a timeout anyway.
Correct. This timeout will never happen in normal case.
It will hit if something bad happened in the board.
+
/*
* Flags used in DMA descriptor preparation helper functions
* (i.e. read_reg_dma/write_reg_dma/read_data_dma/write_data_dma)
@@ -245,6 +247,11 @@
* @tx_sgl_start - start index in data sgl for tx.
* @rx_sgl_pos - current index in data sgl for rx.
* @rx_sgl_start - start index in data sgl for rx.
+ * @first_chan_done - if current transfer already has got first
channel
+ * DMA desc completion.
+ * @txn_done - completion for nand transfer.
s/nand/NAND/
+ * @last_data_desc - last DMA desc in data channel (tx/rx).
+ * @last_cmd_desc - last DMA desc in command channel.
*/
struct bam_transaction {
struct bam_cmd_element *bam_ce;
@@ -258,6 +265,10 @@ struct bam_transaction {
u32 tx_sgl_start;
u32 rx_sgl_pos;
u32 rx_sgl_start;
+ bool first_chan_done;
+ struct completion txn_done;
+ struct dma_async_tx_descriptor *last_data_desc;
+ struct dma_async_tx_descriptor *last_cmd_desc;
};
/*
@@ -504,6 +515,8 @@ static void free_bam_transaction(struct
qcom_nand_controller *nandc)
bam_txn->data_sgl = bam_txn_buf;
+ init_completion(&bam_txn->txn_done);
+
return bam_txn;
}
@@ -523,11 +536,36 @@ static void clear_bam_transaction(struct
qcom_nand_controller *nandc)
bam_txn->tx_sgl_start = 0;
bam_txn->rx_sgl_pos = 0;
bam_txn->rx_sgl_start = 0;
+ bam_txn->last_data_desc = NULL;
+ bam_txn->first_chan_done = false;
Are you sure you don't want to reinit last_cmd_desc here?
Each NAND data transfer will definitely have at least one command
desc so that reinit is redundant.
But some of the NAND transfers can have only command descriptors
(i.e. no data desc) so, we need to reinit last_data_desc.
sg_init_table(bam_txn->cmd_sgl, nandc->max_cwperpage *
QPIC_PER_CW_CMD_SGL);
sg_init_table(bam_txn->data_sgl, nandc->max_cwperpage *
QPIC_PER_CW_DATA_SGL);
+
+ reinit_completion(&bam_txn->txn_done);
+}
+
+/* Callback for DMA descriptor completion */
+static void qpic_bam_dma_done(void *data)
+{
+ struct bam_transaction *bam_txn = data;
+
+ /*
+ * In case of data transfer with NAND, 2 callbacks will be
generated.
+ * One for command channel and another one for data channel.
+ * If current transaction has data descriptors then check if its
+ * already got one DMA channel completion callback. In this case
+ * make the NAND transfer complete otherwise mark first_chan_done
true
+ * and wait for next channel DMA completion callback.
+ */
+ if (bam_txn->last_data_desc && !bam_txn->first_chan_done) {
+ bam_txn->first_chan_done = true;
+ return;
+ }
There is a lot of new variables just to wait for two bam_dma_done().
Why not just creating a boolean like "wait_second completion",
initialize it in prepare_bam_async_desc to true when needed and
complete txn_done when it's false, that's all:
if (bam_txn->wait_second_completion) {
bam_txn->wait_second_completion = false;
return;
}
+
+ complete(&bam_txn->txn_done);
}
static inline struct qcom_nand_host *to_qcom_nand_host(struct
nand_chip *chip)
@@ -756,6 +794,12 @@ static int prepare_bam_async_desc(struct
qcom_nand_controller *nandc,
desc->dma_desc = dma_desc;
+ /* update last data/command descriptor */
+ if (chan == nandc->cmd_chan)
+ bam_txn->last_cmd_desc = dma_desc;
+ else
+ bam_txn->last_data_desc = dma_desc;
+
Is there a reason for the "last_" prefix? why not current_*_desc or
just *_desc? (this is a real question :) ). Correct me if I'm wrong but
you have a scatter-gather list of DMA transfers that are mapped to form
one DMA descriptor, so there is no "last" descriptor, right?
We have 3 DMA channels (tx/rx and command) and each channel has
multiple
DMA descriptors. The callback needs to be set for last
descriptor only for that channel.
Otherwise, as I told you above, why not just a:
if (chan == nandc->data_chan)
bam_txn->wait_second_completion = true;
This is nice idea.
I will change the implementation accordingly.
list_add_tail(&desc->node, &nandc->desc_list);
return 0;
@@ -1273,10 +1317,19 @@ static int submit_descs(struct
qcom_nand_controller *nandc)
cookie = dmaengine_submit(desc->dma_desc);
if (nandc->props->is_bam) {
+ bam_txn->last_cmd_desc->callback = qpic_bam_dma_done;
+ bam_txn->last_cmd_desc->callback_param = bam_txn;
+ if (bam_txn->last_data_desc) {
+ bam_txn->last_data_desc->callback = qpic_bam_dma_done;
+ bam_txn->last_data_desc->callback_param = bam_txn;
+ }
Why don't you do this directly in prepare_bam_async_desc?
With:
dma_desc->callback = ...
dma_desc->callback_param = ...
prepare_bam_async_desc can be called multiple times since
each channel can have list of DMA descriptors. We want
to set callback only for last DMA descriptor in that
channel.
CMD desc1 -> Data desc1 -> Data desc2-> CMD desc2 -> CMD desc3
In the above case, the callback should be set for
Data desc2 and CMD desc3.
Thanks,
Abhishek
+
dma_async_issue_pending(nandc->tx_chan);
dma_async_issue_pending(nandc->rx_chan);
+ dma_async_issue_pending(nandc->cmd_chan);
- if (dma_sync_wait(nandc->cmd_chan, cookie) != DMA_COMPLETE)
+ if (!wait_for_completion_timeout(&bam_txn->txn_done,
+ QPIC_NAND_COMPLETION_TIMEOUT))
return -ETIMEDOUT;
} else {
if (dma_sync_wait(nandc->chan, cookie) != DMA_COMPLETE)
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
