>From SDM845, the Q6SS reset sequence on software side has been
simplified with the introduction of boot FSM which assists in
bringing the Q6 out of reset.
SDM845 brings a new reset signal ALT_RESET which is a part of
the MSS subsystem hence requires reset clks to be enabled before
assert/deassert. Use the SoC specific reset helper function to
add support for ALT_RESET in SDM845.
Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
---
drivers/remoteproc/qcom_q6v5_pil.c | 109 ++++++++++++++++++++++++++++-
1 file changed, 107 insertions(+), 2 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
index 552805bc07c1..5e85ce975ef8 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -57,6 +57,8 @@
#define RMB_PMI_META_DATA_REG 0x10
#define RMB_PMI_CODE_START_REG 0x14
#define RMB_PMI_CODE_LENGTH_REG 0x18
+#define RMB_MBA_MSS_STATUS 0x40
+#define RMB_MBA_ALT_RESET 0x44
#define RMB_CMD_META_DATA_READY 0x1
#define RMB_CMD_LOAD_READY 0x2
@@ -104,6 +106,13 @@
#define QDSP6SS_XO_CBCR 0x0038
#define QDSP6SS_ACC_OVERRIDE_VAL 0x20
+/* QDSP6v65 parameters */
+#define QDSP6SS_SLEEP 0x3C
+#define QDSP6SS_BOOT_CORE_START 0x400
+#define QDSP6SS_BOOT_CMD 0x404
+#define SLEEP_CHECK_MAX_LOOPS 200
+#define BOOT_FSM_TIMEOUT 10000
+
struct reg_info {
struct regulator *reg;
int uV;
@@ -121,9 +130,11 @@ struct rproc_hexagon_res {
struct qcom_mss_reg_res *proxy_supply;
struct qcom_mss_reg_res *active_supply;
char **proxy_clk_names;
+ char **reset_clk_names;
char **active_clk_names;
int version;
bool need_mem_protection;
+ bool has_alt_reset;
};
struct q6v5 {
@@ -148,8 +159,10 @@ struct q6v5 {
int fatal_irq;
struct clk *active_clks[8];
+ struct clk *reset_clks[4];
struct clk *proxy_clks[4];
int active_clk_count;
+ int reset_clk_count;
int proxy_clk_count;
struct reg_info active_regs[1];
@@ -174,6 +187,7 @@ struct q6v5 {
struct qcom_rproc_ssr ssr_subdev;
struct qcom_sysmon *sysmon;
bool need_mem_protection;
+ bool has_alt_reset;
bool unvoted_flag;
int mpss_perm;
int mba_perm;
@@ -184,6 +198,7 @@ enum {
MSS_MSM8916,
MSS_MSM8974,
MSS_MSM8996,
+ MSS_SDM845,
};
static int q6v5_regulator_init(struct device *dev, struct reg_info *regs,
@@ -354,11 +369,22 @@ static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
static int q6v5_reset_assert(struct q6v5 *qproc)
{
+ if (qproc->has_alt_reset)
+ return reset_control_reset(qproc->mss_restart);
+
return reset_control_assert(qproc->mss_restart);
}
static int q6v5_reset_deassert(struct q6v5 *qproc)
{
+ if (qproc->has_alt_reset) {
+ writel(1, qproc->rmb_base + RMB_MBA_ALT_RESET);
+ reset_control_reset(qproc->mss_restart);
+ writel(0, qproc->rmb_base + RMB_MBA_ALT_RESET);
+
+ return 0;
+ }
+
return reset_control_deassert(qproc->mss_restart);
}
@@ -414,8 +440,35 @@ static int q6v5proc_reset(struct q6v5 *qproc)
int ret;
int i;
+ if (qproc->version == MSS_SDM845) {
+ val = readl(qproc->reg_base + QDSP6SS_SLEEP);
+ val |= 0x1;
+ writel(val, qproc->reg_base + QDSP6SS_SLEEP);
- if (qproc->version == MSS_MSM8996) {
+ ret = readl_poll_timeout(qproc->reg_base + QDSP6SS_SLEEP,
+ val, !(val & BIT(31)), 1,
+ SLEEP_CHECK_MAX_LOOPS);
+ if (ret) {
+ dev_err(qproc->dev, "QDSP6SS Sleep clock timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ /* De-assert QDSP6 stop core */
+ writel(1, qproc->reg_base + QDSP6SS_BOOT_CORE_START);
+ /* Trigger boot FSM */
+ writel(1, qproc->reg_base + QDSP6SS_BOOT_CMD);
+
+ ret = readl_poll_timeout(qproc->rmb_base + RMB_MBA_MSS_STATUS,
+ val, (val & BIT(0)) != 0, 10, BOOT_FSM_TIMEOUT);
+ if (ret) {
+ dev_err(qproc->dev, "Boot FSM failed to complete.\n");
+ /* Reset the modem so that boot FSM is in reset state */
+ q6v5_reset_deassert(qproc);
+ return ret;
+ }
+
+ goto pbl_wait;
+ } else if (qproc->version == MSS_MSM8996) {
/* Override the ACC value if required */
writel(QDSP6SS_ACC_OVERRIDE_VAL,
qproc->reg_base + QDSP6SS_STRAP_ACC);
@@ -523,6 +576,7 @@ static int q6v5proc_reset(struct q6v5 *qproc)
val &= ~Q6SS_STOP_CORE;
writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
+pbl_wait:
/* Wait for PBL status */
ret = q6v5_rmb_pbl_wait(qproc, 1000);
if (ret == -ETIMEDOUT) {
@@ -777,10 +831,18 @@ static int q6v5_start(struct rproc *rproc)
dev_err(qproc->dev, "failed to enable supplies\n");
goto disable_proxy_clk;
}
+
+ ret = q6v5_clk_enable(qproc->dev, qproc->reset_clks,
+ qproc->reset_clk_count);
+ if (ret) {
+ dev_err(qproc->dev, "failed to enable reset clocks\n");
+ goto disable_vdd;
+ }
+
ret = q6v5_reset_deassert(qproc);
if (ret) {
dev_err(qproc->dev, "failed to deassert mss restart\n");
- goto disable_vdd;
+ goto disable_reset_clks;
}
ret = q6v5_clk_enable(qproc->dev, qproc->active_clks,
@@ -870,6 +932,9 @@ static int q6v5_start(struct rproc *rproc)
assert_reset:
q6v5_reset_assert(qproc);
+disable_reset_clks:
+ q6v5_clk_disable(qproc->dev, qproc->reset_clks,
+ qproc->reset_clk_count);
disable_vdd:
q6v5_regulator_disable(qproc, qproc->active_regs,
qproc->active_reg_count);
@@ -929,6 +994,8 @@ static int q6v5_stop(struct rproc *rproc)
qproc->proxy_reg_count);
}
+ q6v5_clk_disable(qproc->dev, qproc->reset_clks,
+ qproc->reset_clk_count);
q6v5_clk_disable(qproc->dev, qproc->active_clks,
qproc->active_clk_count);
q6v5_regulator_disable(qproc, qproc->active_regs,
@@ -1208,6 +1275,14 @@ static int q6v5_probe(struct platform_device *pdev)
}
qproc->proxy_clk_count = ret;
+ ret = q6v5_init_clocks(&pdev->dev, qproc->reset_clks,
+ desc->reset_clk_names);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to get reset clocks.\n");
+ goto free_rproc;
+ }
+ qproc->reset_clk_count = ret;
+
ret = q6v5_init_clocks(&pdev->dev, qproc->active_clks,
desc->active_clk_names);
if (ret < 0) {
@@ -1237,6 +1312,7 @@ static int q6v5_probe(struct platform_device *pdev)
goto free_rproc;
qproc->version = desc->version;
+ qproc->has_alt_reset = desc->has_alt_reset;
qproc->need_mem_protection = desc->need_mem_protection;
ret = q6v5_request_irq(qproc, pdev, "wdog", q6v5_wdog_interrupt,
&qproc->wdog_irq);
@@ -1301,6 +1377,31 @@ static int q6v5_remove(struct platform_device *pdev)
return 0;
}
+static const struct rproc_hexagon_res sdm845_mss = {
+ .hexagon_mba_image = "mba.mbn",
+ .proxy_clk_names = (char*[]){
+ "xo",
+ "axis2",
+ "prng",
+ NULL
+ },
+ .reset_clk_names = (char*[]){
+ "iface",
+ "snoc_axi",
+ NULL
+ },
+ .active_clk_names = (char*[]){
+ "bus",
+ "mem",
+ "gpll0_mss",
+ "mnoc_axi",
+ NULL
+ },
+ .need_mem_protection = true,
+ .has_alt_reset = true,
+ .version = MSS_SDM845,
+};
+
static const struct rproc_hexagon_res msm8996_mss = {
.hexagon_mba_image = "mba.mbn",
.proxy_clk_names = (char*[]){
@@ -1316,6 +1417,7 @@ static const struct rproc_hexagon_res msm8996_mss = {
NULL
},
.need_mem_protection = true,
+ .has_alt_reset = false,
.version = MSS_MSM8996,
};
@@ -1347,6 +1449,7 @@ static const struct rproc_hexagon_res msm8916_mss = {
NULL
},
.need_mem_protection = false,
+ .has_alt_reset = false,
.version = MSS_MSM8916,
};
@@ -1386,6 +1489,7 @@ static const struct rproc_hexagon_res msm8974_mss = {
NULL
},
.need_mem_protection = false,
+ .has_alt_reset = false,
.version = MSS_MSM8974,
};
@@ -1394,6 +1498,7 @@ static const struct of_device_id q6v5_of_match[] = {
{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
+ { .compatible = "qcom,sdm845-mss-pil", .data = &sdm845_mss},
{ },
};
MODULE_DEVICE_TABLE(of, q6v5_of_match);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
