Re: [PATCH v4 4/5] remoteproc: qcom: Add support for mss remoteproc on SDM845

Sibi S <sibis@xxxxxxxxxxxxxx> · Mon, 21 May 2018 22:21:56 +0530

Hi Bjorn,
Thanks for the review.

On 05/19/2018 03:01 AM, Bjorn Andersson wrote:
On Wed 25 Apr 08:08 PDT 2018, Sibi Sankar wrote:

 From SDM845, the Q6SS reset sequence on software side has been
simplified with the introduction of boot FSM which assists in
bringing the Q6 out of reset

Add GLINK subdevice to allow definition of GLINK edge as a
child of modem-pil


Please split this in two patches; one adding sdm845 and one adding the
glink subdev. You can squash in the addition of the compatible in the dt
binding into the sdm845 code patch, you wish as well.


Will split it into two commits
Will still keep the dt-binding as a separate patch

Apart from that this looks good!

Regards,
Bjorn

Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
---
  drivers/remoteproc/qcom_q6v5_pil.c | 65 +++++++++++++++++++++++++++++-
  1 file changed, 64 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
index 7e2d04d4f2f0..4d9504e8bf8e 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -57,6 +57,8 @@
  #define RMB_PMI_META_DATA_REG		0x10
  #define RMB_PMI_CODE_START_REG		0x14
  #define RMB_PMI_CODE_LENGTH_REG		0x18
+#define RMB_MBA_MSS_STATUS		0x40
+#define RMB_MBA_ALT_RESET		0x44
  
  #define RMB_CMD_META_DATA_READY		0x1
  #define RMB_CMD_LOAD_READY		0x2
@@ -104,6 +106,13 @@
  #define QDSP6SS_XO_CBCR		0x0038
  #define QDSP6SS_ACC_OVERRIDE_VAL		0x20
  
+/* QDSP6v65 parameters */
+#define QDSP6SS_SLEEP                   0x3C
+#define QDSP6SS_BOOT_CORE_START         0x400
+#define QDSP6SS_BOOT_CMD                0x404
+#define SLEEP_CHECK_MAX_LOOPS           200
+#define BOOT_FSM_TIMEOUT                10000
+
  struct reg_info {
  	struct regulator *reg;
  	int uV;
@@ -170,6 +179,7 @@ struct q6v5 {
  	void *mpss_region;
  	size_t mpss_size;
  
+	struct qcom_rproc_glink glink_subdev;
  	struct qcom_rproc_subdev smd_subdev;
  	struct qcom_rproc_ssr ssr_subdev;
  	struct qcom_sysmon *sysmon;
@@ -184,6 +194,7 @@ enum {
  	MSS_MSM8916,
  	MSS_MSM8974,
  	MSS_MSM8996,
+	MSS_SDM845,
  };
  
  static int q6v5_regulator_init(struct device *dev, struct reg_info *regs,
@@ -390,8 +401,35 @@ static int q6v5proc_reset(struct q6v5 *qproc)
  	int ret;
  	int i;
  
+	if (qproc->version == MSS_SDM845) {
  
-	if (qproc->version == MSS_MSM8996) {
+		val = readl(qproc->reg_base + QDSP6SS_SLEEP);
+		val |= 0x1;
+		writel(val, qproc->reg_base + QDSP6SS_SLEEP);
+
+		ret = readl_poll_timeout(qproc->reg_base + QDSP6SS_SLEEP,
+					 val, !(val & BIT(31)), 1,
+					 SLEEP_CHECK_MAX_LOOPS);
+		if (ret) {
+			dev_err(qproc->dev, "QDSP6SS Sleep clock timed out\n");
+			return -ETIMEDOUT;
+		}
+
+		/* De-assert QDSP6 stop core */
+		writel(1, qproc->reg_base + QDSP6SS_BOOT_CORE_START);
+		/* Trigger boot FSM */
+		writel(1, qproc->reg_base + QDSP6SS_BOOT_CMD);
+
+		ret = readl_poll_timeout(qproc->rmb_base + RMB_MBA_MSS_STATUS,
+				val, (val & BIT(0)) != 0, 10, BOOT_FSM_TIMEOUT);
+		if (ret) {
+			dev_err(qproc->dev, "Boot FSM failed to complete.\n");
+			return ret;
+		}
+
+		goto pbl_wait;
+
+	} else if (qproc->version == MSS_MSM8996) {
  		/* Override the ACC value if required */
  		writel(QDSP6SS_ACC_OVERRIDE_VAL,
  		       qproc->reg_base + QDSP6SS_STRAP_ACC);
@@ -499,6 +537,7 @@ static int q6v5proc_reset(struct q6v5 *qproc)
  	val &= ~Q6SS_STOP_CORE;
  	writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
  
+pbl_wait:
  	/* Wait for PBL status */
  	ret = q6v5_rmb_pbl_wait(qproc, 1000);
  	if (ret == -ETIMEDOUT) {
@@ -1256,6 +1295,7 @@ static int q6v5_probe(struct platform_device *pdev)
  	}
  	qproc->mpss_perm = BIT(QCOM_SCM_VMID_HLOS);
  	qproc->mba_perm = BIT(QCOM_SCM_VMID_HLOS);
+	qcom_add_glink_subdev(rproc, &qproc->glink_subdev);
  	qcom_add_smd_subdev(rproc, &qproc->smd_subdev);
  	qcom_add_ssr_subdev(rproc, &qproc->ssr_subdev, "mpss");
  	qproc->sysmon = qcom_add_sysmon_subdev(rproc, "modem", 0x12);
@@ -1279,6 +1319,7 @@ static int q6v5_remove(struct platform_device *pdev)
  	rproc_del(qproc->rproc);
  
  	qcom_remove_sysmon_subdev(qproc->sysmon);
+	qcom_remove_glink_subdev(qproc->rproc, &qproc->glink_subdev);
  	qcom_remove_smd_subdev(qproc->rproc, &qproc->smd_subdev);
  	qcom_remove_ssr_subdev(qproc->rproc, &qproc->ssr_subdev);
  	rproc_free(qproc->rproc);
@@ -1286,6 +1327,27 @@ static int q6v5_remove(struct platform_device *pdev)
  	return 0;
  }
  
+static const struct rproc_hexagon_res sdm845_mss = {
+	.hexagon_mba_image = "mba.mbn",
+	.proxy_clk_names = (char*[]){
+			"xo",
+			"axis2",
+			"prng",
+			NULL
+	},
+	.active_clk_names = (char*[]){
+			"iface",
+			"bus",
+			"mem",
+			"gpll0_mss",
+			"snoc_axi",
+			"mnoc_axi",
+			NULL
+	},
+	.need_mem_protection = true,
+	.version = MSS_SDM845,
+};
+
  static const struct rproc_hexagon_res msm8996_mss = {
  	.hexagon_mba_image = "mba.mbn",
  	.proxy_clk_names = (char*[]){
@@ -1379,6 +1441,7 @@ static const struct of_device_id q6v5_of_match[] = {
  	{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
  	{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
  	{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
+	{ .compatible = "qcom,sdm845-mss-pil", .data = &sdm845_mss},
  	{ },
  };
  MODULE_DEVICE_TABLE(of, q6v5_of_match);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project



--
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc, is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html






