Quoting Linus Walleij (2018-05-16 06:46:01) > On Tue, May 8, 2018 at 2:15 AM, Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote: > > > I was debugging some gpio issues and I thought that the output of gpio > > debugfs was telling me the high or low level of the gpios with a '1' or > > a '0'. We saw a line like this though: > > > > gpio93 : in 4 2mA pull down > > > > and I started to think that there may be a gas leak in the building > > because '4' doesn't mean high or low, and other pins said '0' or '1'. It > > turns out, '4' is the function selection for the pinmux of the gpio and > > not the value on the pin. Reading code helps decipher what debugfs is > > actually saying. > > > > Add support to read the input or output pin depending on how the pin is > > configured so we can easily see the high or low value of the pin in > > debugfs. Now the output looks like > > > > gpio93 : in low func4 2mA pull down > > > > which clearly shows that the pin is an input, low, with function 4 and a > > 2mA drive strength plus a pull down. > > > > Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> > > Cc: Alexandru M Stan <amstan@xxxxxxxxxxxx> > > Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx> > > Patch applied with some fuzzing. Please check the result! > Looks good visually. I'll pull it in shortly and test. Thanks! -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
