Hi Balakrishna, > Signed-off-by: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx> > --- > .../devicetree/bindings/net/qualcomm-bluetooth.txt | 31 ++++++++++++++++++++-- > 1 file changed, 29 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt > index 0ea18a5..63cae49 100644 > --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt > +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt > @@ -10,12 +10,24 @@ device the slave device is attached to. > Required properties: > - compatible: should contain one of the following: > * "qcom,qca6174-bt" > + * "qcom,wcn3990-bt" > > Optional properties: > - enable-gpios: gpio specifier used to enable chip > - clocks: clock provided to the controller (SUSCLK_32KHZ) > - > -Example: > + - vddpa-supply: Bluetooth VDD PA regulator handle > + - vddio-supply: Bluetooth VDD IO regulator handle > + - vddldo-supply: Bluetooth VDD LDO regulator handle. Kept under optional > + parameters as some of the chipsets doesn't require ldo or > + it may use from same vddio. > + - vddxtal-supply: Bluetooth VDD XTAL regulator handle > + - vddcore-supply: Bluetooth VDD CORE regulator handle > + - vddpwd-supply: Chip power down gpio is required when bluetooth module > + and other modules like wifi co-exist in a singe chip and > + shares a common gpio to bring chip out of reset. > + - oper-speed: operating speed of the chip. we actually agreed on using max-speed for these. And it should optional to limit speed for “broken” devices or that have some limit because of the platform. Regards Marcel -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
