On Fri, Apr 27, 2018 at 9:10 AM, Thierry Escande <thierry.escande@xxxxxxxxxx> wrote: > Remove the usage of IRQ_TYPE_NONE to fix loud warnings from > patch (83a86fbb5b56b "irqchip/gic: Loudly complain about > the use of IRQ_TYPE_NONE"). > > Signed-off-by: Thierry Escande <thierry.escande@xxxxxxxxxx> Reviewed-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx> Tested-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx> (boot report here: https://storage.kernelci.org/qcom-lt/integration-linux-qcomlt/v4.17-rc4-247-gbe94bee41bf6/arm64/defconfig/lab-bjorn/boot-apq8096-db820c.txt) > --- > arch/arm64/boot/dts/qcom/msm8996.dtsi | 19 ++++++++++--------- > 1 file changed, 10 insertions(+), 9 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi > index 410ae787ebb4..1aaf1fa2604e 100644 > --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi > @@ -437,7 +437,7 @@ > blsp2_i2c0: i2c@75b5000 { > compatible = "qcom,i2c-qup-v2.2.1"; > reg = <0x075b5000 0x1000>; > - interrupts = <GIC_SPI 101 0>; > + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&gcc GCC_BLSP2_AHB_CLK>, > <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; > clock-names = "iface", "core"; > @@ -468,7 +468,7 @@ > blsp2_i2c1: i2c@75b6000 { > compatible = "qcom,i2c-qup-v2.2.1"; > reg = <0x075b6000 0x1000>; > - interrupts = <GIC_SPI 102 0>; > + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&gcc GCC_BLSP2_AHB_CLK>, > <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; > clock-names = "iface", "core"; > @@ -493,7 +493,7 @@ > blsp1_i2c2: i2c@7577000 { > compatible = "qcom,i2c-qup-v2.2.1"; > reg = <0x07577000 0x1000>; > - interrupts = <GIC_SPI 97 0>; > + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&gcc GCC_BLSP1_AHB_CLK>, > <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; > clock-names = "iface", "core"; > @@ -526,7 +526,8 @@ > reg = <0x74a4900 0x314>, <0x74a4000 0x800>; > reg-names = "hc_mem", "core_mem"; > > - interrupts = <0 125 0>, <0 221 0>; > + interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, > + <0 221 IRQ_TYPE_LEVEL_HIGH>; > interrupt-names = "hc_irq", "pwr_irq"; > > clock-names = "iface", "core", "xo"; > @@ -809,7 +810,7 @@ > dwc3@7600000 { > compatible = "snps,dwc3"; > reg = <0x7600000 0xcc00>; > - interrupts = <0 138 0>; > + interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>; > phys = <&hsusb_phy2>; > phy-names = "usb2-phy"; > }; > @@ -838,7 +839,7 @@ > dwc3@6a00000 { > compatible = "snps,dwc3"; > reg = <0x6a00000 0xcc00>; > - interrupts = <0 131 0>; > + interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; > phys = <&hsusb_phy1>, <&ssusb_phy_0>; > phy-names = "usb2-phy", "usb3-phy"; > }; > @@ -872,7 +873,7 @@ > ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>, > <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; > > - interrupts = <GIC_SPI 405 IRQ_TYPE_NONE>; > + interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; > interrupt-names = "msi"; > #interrupt-cells = <1>; > interrupt-map-mask = <0 0 0 0x7>; > @@ -927,7 +928,7 @@ > ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>, > <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; > > - interrupts = <GIC_SPI 413 IRQ_TYPE_NONE>; > + interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>; > interrupt-names = "msi"; > #interrupt-cells = <1>; > interrupt-map-mask = <0 0 0 0x7>; > @@ -980,7 +981,7 @@ > > device_type = "pci"; > > - interrupts = <GIC_SPI 421 IRQ_TYPE_NONE>; > + interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; > interrupt-names = "msi"; > #interrupt-cells = <1>; > interrupt-map-mask = <0 0 0 0x7>; > -- > 2.14.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
