For platforms that has multiple copies of the TSENS hardware block it's necessary to be able to specify the number of sensors per block in DeviceTree. Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> --- .../devicetree/bindings/thermal/qcom-tsens.txt | 1 + drivers/thermal/qcom/tsens.c | 12 +++++++++--- 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt index 292ed89d900b..06195e8f35e2 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt @@ -8,6 +8,7 @@ Required properties: - reg: Address range of the thermal registers - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. +- #qcom,sensors: Number of sensors in tsens block - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify nvmem cells diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index 3f9fe6aa51cc..20f3b87d7667 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -116,6 +116,7 @@ static int tsens_probe(struct platform_device *pdev) struct tsens_device *tmdev; const struct tsens_data *data; const struct of_device_id *id; + u32 num_sensors; if (pdev->dev.of_node) dev = &pdev->dev; @@ -130,18 +131,23 @@ static int tsens_probe(struct platform_device *pdev) else data = &data_8960; - if (data->num_sensors <= 0) { + num_sensors = data->num_sensors; + + if (np) + of_property_read_u32(np, "#qcom,sensors", &num_sensors); + + if (num_sensors <= 0) { dev_err(dev, "invalid number of sensors\n"); return -EINVAL; } tmdev = devm_kzalloc(dev, sizeof(*tmdev) + - data->num_sensors * sizeof(*s), GFP_KERNEL); + num_sensors * sizeof(*s), GFP_KERNEL); if (!tmdev) return -ENOMEM; tmdev->dev = dev; - tmdev->num_sensors = data->num_sensors; + tmdev->num_sensors = num_sensors; tmdev->ops = data->ops; for (i = 0; i < tmdev->num_sensors; i++) { if (data->hw_ids) -- 2.17.0 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html