[PATCH] pinctrl: qcom: fix wrong pull status display for no_keeper SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



DebugsFS strings about pin pull status for no_keeper SoC are wrong

Fix this by adding a different string array for no_keeper SoC

Signed-off-by: Clément Péron <peron.clem@xxxxxxxxx>
---
 drivers/pinctrl/qcom/pinctrl-msm.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index ad80a17c9990..84165f823c4b 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -508,13 +508,19 @@ static void msm_gpio_dbg_show_one(struct seq_file *s,
 	int pull;
 	u32 ctl_reg;
 
-	static const char * const pulls[] = {
+	static const char * const pulls_keeper[] = {
 		"no pull",
 		"pull down",
 		"keeper",
 		"pull up"
 	};
 
+	static const char * const pulls_no_keeper[] = {
+		"no pull",
+		"pull down",
+		"pull up",
+	};
+
 	if (!gpiochip_line_is_valid(chip, offset))
 		return;
 
@@ -528,7 +534,10 @@ static void msm_gpio_dbg_show_one(struct seq_file *s,
 
 	seq_printf(s, " %-8s: %-3s %d", g->name, is_out ? "out" : "in", func);
 	seq_printf(s, " %dmA", msm_regval_to_drive(drive));
-	seq_printf(s, " %s", pulls[pull]);
+	if(pctrl->soc->pull_no_keeper)
+		seq_printf(s, " %s", pulls_no_keeper[pull]);
+	else
+		seq_printf(s, " %s", pulls_keeper[pull]);
 	seq_puts(s, "\n");
 }
 
-- 
2.17.0

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux