On 4/25/2018 2:51 AM, Austin Christ wrote:
> The I2C spec UM10204 Rev. 6 specifies the following timings.
>
> Standard Fast Mode Fast Mode Plus
> SCL low 4.7us 1.3us 0.5us
> SCL high 4.0us 0.6us 0.26us
>
> This results in a 33%/66% duty cycle as opposed to the 50%/50% duty cycle
> used for Standard-mode.
>
> Add High Time Divider settings to correct duty cycle for FM(400kHz) and
> FM+(1MHz).
>
> Signed-off-by: Austin Christ <austinwc@xxxxxxxxxxxxxx>
> ---
Reviewed-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
Regards,
Sricharan
> drivers/i2c/busses/i2c-qup.c | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
> index ce5f215..f87f29f 100644
> --- a/drivers/i2c/busses/i2c-qup.c
> +++ b/drivers/i2c/busses/i2c-qup.c
> @@ -1855,9 +1855,15 @@ static int qup_i2c_probe(struct platform_device *pdev)
> size = QUP_INPUT_FIFO_SIZE(io_mode);
> qup->in_fifo_sz = qup->in_blk_sz * (2 << size);
>
> - fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
> hs_div = 3;
> - qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
> + if (clk_freq <= I2C_STANDARD_FREQ) {
> + fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
> + qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
> + } else {
> + /* 33%/66% duty cycle */
> + fs_div = ((src_clk_freq / clk_freq) - 6) * 2 / 3;
> + qup->clk_ctl = ((fs_div / 2) << 16) | (hs_div << 8) | (fs_div & 0xff);
> + }
>
> /*
> * Time it takes for a byte to be clocked out on the bus.
>
--
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
