On 2018-04-24 20:13, Rob Herring wrote:
On Wed, Apr 18, 2018 at 05:50:02PM +0530, Sandeep Panda wrote:
The Innolux TV123WAM is a 12.3" eDP display panel
with 2160x1440 resolution.
Why don't you just submit this for upstream?
Sean Paul has suggested to reuse simple panel driver instead of having a
new driver altogether. So all these dt-bindings wont be needed.
Signed-off-by: Sandeep Panda <spanda@xxxxxxxxxxxxxx>
---
.../bindings/display/panel/innolux,edp-2k-panel.txt | 21
+++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt
diff --git
a/Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt
b/Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt
new file mode 100644
index 0000000..19f271c
--- /dev/null
+++
b/Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt
@@ -0,0 +1,21 @@
+Innolux TV123WAM 12.3 inch eDP display panel
+
+Required properties:
+- power-supply: regulator to provide the supply voltage
+- enable-gpios: GPIO pin to enable or disable the panel
Need to state the active state.
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+ edp_panel: edp_panel {
panel {
+ compatible = "innolux, edp_2k_panel";
spurious space ^
+ reg = <0>;
Not documented. Should be dropped.
+
+ enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
+
+ power-supply = <&pm8916_l8>;
+
Remove the extra blank lines.
+ backlight = <&backlight>;
+ };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree"
in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
