Add support for Qualcomm Centriq devices that are qup-v2 compatible but
do not support DMA, so nodma needs to be set.
Signed-off-by: Austin Christ <austinwc@xxxxxxxxxxxxxx>
---
v1:
- Initial
v2:
- Remove whitespace error
v3:
- Move branch to QUPv2 segment of probe
---
drivers/i2c/busses/i2c-qup.c | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 904dfec..c024f85 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -1648,6 +1648,14 @@ static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup)
clk_disable_unprepare(qup->pclk);
}
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id qup_i2c_acpi_match[] = {
+ { "QCOM8010"},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, qup_i2c_acpi_match);
+#endif
+
static int qup_i2c_probe(struct platform_device *pdev)
{
static const int blk_sizes[] = {4, 16, 32};
@@ -1682,7 +1690,10 @@ static int qup_i2c_probe(struct platform_device *pdev)
} else {
qup->adap.algo = &qup_i2c_algo_v2;
is_qup_v1 = false;
- ret = qup_i2c_req_dma(qup);
+ if (acpi_match_device(qup_i2c_acpi_match, qup->dev))
+ goto nodma;
+ else
+ ret = qup_i2c_req_dma(qup);
if (ret == -EPROBE_DEFER)
goto fail_dma;
@@ -1959,14 +1970,6 @@ static int qup_i2c_resume(struct device *device)
};
MODULE_DEVICE_TABLE(of, qup_i2c_dt_match);
-#if IS_ENABLED(CONFIG_ACPI)
-static const struct acpi_device_id qup_i2c_acpi_match[] = {
- { "QCOM8010"},
- { },
-};
-MODULE_DEVICE_TABLE(acpi, qup_i2c_acpi_match);
-#endif
-
static struct platform_driver qup_i2c_driver = {
.probe = qup_i2c_probe,
.remove = qup_i2c_remove,
--
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
