Re: [PATCH v2 2/2] Bluetooth: Add support for wcn3990 soc.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Thierry,

On 2018-04-20 21:41, Thierry Escande wrote:
Hi Balakrishna,

On 19/04/2018 15:34, Balakrishna Godavarthi wrote:
  - Add support to set voltage/current of various regualtors
    to power up/down BT QCA chip wcn3990.
  - Add firmware download support for BT QCA chip wcn3990.

Signed-off-by: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
---
drivers/bluetooth/btqca.c | 393 +++++++++++++++++++++++-------
  drivers/bluetooth/btqca.h        |  49 +++-
drivers/bluetooth/hci_qca.c | 501 +++++++++++++++++++++++++++++++++------
  include/net/bluetooth/hci_core.h |   3 +-
  net/bluetooth/hci_core.c         |   2 +-
  net/bluetooth/hci_request.c      |  23 ++
  net/bluetooth/hci_request.h      |   2 +
  7 files changed, 812 insertions(+), 161 deletions(-)

This is a pretty big patch. You should at least put the renaming of
the rome_* functions and structures into a separate patch.

yes this will be big patch as we have added support for qualcomm new bluetooth chip. In this we have changed existing function names rome_* to reuse it for new bluetooth chip. I feel we will not face any merge conflicts for btqca.c file. if we put rome_* function and structures into new patch, this make create merge conflicts for hci_qca.c file.


Also there are some coding style issues. You can use
./scripts/checkpatch.pl to check and fix them.


  will double check the coding style issues.

Regards,
Thierry


diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 0bbdfce..5b47df8 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -1,7 +1,7 @@
  /*
   *  Bluetooth supports for Qualcomm Atheros chips
   *
- *  Copyright (c) 2015 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2015, 2018 The Linux Foundation. All rights reserved.
   *
* This program is free software; you can redistribute it and/or modify
   *  it under the terms of the GNU General Public License version 2
@@ -19,82 +19,18 @@
   */
  #include <linux/module.h>
  #include <linux/firmware.h>
-
  #include <net/bluetooth/bluetooth.h>
  #include <net/bluetooth/hci_core.h>
-
  #include "btqca.h"
    #define VERSION "0.1"
-static int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version)
-{
-	struct sk_buff *skb;
-	struct edl_event_hdr *edl;
-	struct rome_version *ver;
-	char cmd;
-	int err = 0;
-
-	BT_DBG("%s: ROME Patch Version Request", hdev->name);
-
-	cmd = EDL_PATCH_VER_REQ_CMD;
- skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN,
-				&cmd, HCI_VENDOR_PKT, HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		err = PTR_ERR(skb);
-		BT_ERR("%s: Failed to read version of ROME (%d)", hdev->name,
-		       err);
-		return err;
-	}
-
-	if (skb->len != sizeof(*edl) + sizeof(*ver)) {
-		BT_ERR("%s: Version size mismatch len %d", hdev->name,
-		       skb->len);
-		err = -EILSEQ;
-		goto out;
-	}
-
-	edl = (struct edl_event_hdr *)(skb->data);
-	if (!edl) {
-		BT_ERR("%s: TLV with no header", hdev->name);
-		err = -EILSEQ;
-		goto out;
-	}
-
-	if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
-	    edl->rtype != EDL_APP_VER_RES_EVT) {
-		BT_ERR("%s: Wrong packet received %d %d", hdev->name,
-		       edl->cresp, edl->rtype);
-		err = -EIO;
-		goto out;
-	}
-
-	ver = (struct rome_version *)(edl->data);
-
- BT_DBG("%s: Product:0x%08x", hdev->name, le32_to_cpu(ver->product_id)); - BT_DBG("%s: Patch :0x%08x", hdev->name, le16_to_cpu(ver->patch_ver)); - BT_DBG("%s: ROM :0x%08x", hdev->name, le16_to_cpu(ver->rome_ver));
-	BT_DBG("%s: SOC    :0x%08x", hdev->name, le32_to_cpu(ver->soc_id));
-
-	/* ROME chipset version can be decided by patch and SoC
-	 * version, combination with upper 2 bytes from SoC
-	 * and lower 2 bytes from patch will be used.
-	 */
-	*rome_version = (le32_to_cpu(ver->soc_id) << 16) |
-			(le16_to_cpu(ver->rome_ver) & 0x0000ffff);
-
-out:
-	kfree_skb(skb);
-
-	return err;
-}
-
-static int rome_reset(struct hci_dev *hdev)
+static int qca_btsoc_reset(struct hci_dev *hdev)
  {
  	struct sk_buff *skb;
  	int err;
  -	BT_DBG("%s: ROME HCI_RESET", hdev->name);
+	BT_DBG("%s: ROME/wcn3990 HCI_RESET", hdev->name);
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
  	if (IS_ERR(skb)) {
@@ -108,7 +44,7 @@ static int rome_reset(struct hci_dev *hdev)
  	return 0;
  }
  -static void rome_tlv_check_data(struct rome_config *config,
+static void rome_tlv_check_data(struct qca_config *config,
  				const struct firmware *fw)
  {
  	const u8 *data;
@@ -194,8 +130,121 @@ static void rome_tlv_check_data(struct rome_config *config,
  	}
  }
-static int rome_tlv_send_segment(struct hci_dev *hdev, int idx, int seg_size,
-				 const u8 *data)
+static void cherokee_tlv_check_data(struct qca_config *config,
+			const struct firmware *fw, bool *dwnd_flag)
+{
+	const u8 *data;
+	u32 type_len;
+	u16 tag_id, tag_len;
+	int idx, length;
+	struct tlv_type_hdr *tlv;
+	struct cherokee_tlv_type_patch *tlv_patch;
+	struct tlv_type_nvm *tlv_nvm;
+
+	tlv = (struct tlv_type_hdr *)fw->data;
+
+	type_len = le32_to_cpu(tlv->type_len);
+	length = (type_len >> 8) & 0x00ffffff;
+
+	BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff);
+	BT_DBG("Length\t\t : %d bytes", length);
+
+	switch (config->type) {
+	case TLV_TYPE_PATCH:
+		tlv_patch = (struct tlv_type_patch *)tlv->data;
+		BT_DBG("Total Length\t\t : %d bytes",
+			le32_to_cpu(tlv_patch->total_size));
+		BT_DBG("Patch Data Length\t : %d bytes",
+			le32_to_cpu(tlv_patch->data_length));
+		BT_DBG("Signing Format Version : 0x%x",
+			tlv_patch->format_version);
+		BT_DBG("Signature Algorithm\t : 0x%x",
+			tlv_patch->signature);
+		BT_DBG("Download flag\t : 0x%x",
+			tlv_patch->dwnd_cfg);
+		BT_DBG("Reserved\t\t : 0x%x",
+			le16_to_cpu(tlv_patch->reserved1));
+		BT_DBG("Product ID\t\t : 0x%04x",
+			le16_to_cpu(tlv_patch->product_id));
+		BT_DBG("Rom Build Version\t : 0x%04x",
+			le16_to_cpu(tlv_patch->rom_build));
+		BT_DBG("Patch Version\t\t : 0x%04x",
+			le16_to_cpu(tlv_patch->patch_version));
+		BT_DBG("Reserved\t\t : 0x%x",
+			le16_to_cpu(tlv_patch->reserved2));
+		BT_DBG("Patch Entry Address\t : 0x%x",
+			le32_to_cpu(tlv_patch->entry));
+		/* If the download flag is 0x03, don't wait
+		 * for response from soc,i.e. 1 to n-1
+		 * segment download.
+		 */
+		if (tlv_patch->dwnd_cfg == 0x03)
+			*dwnd_flag = false;
+		else
+			*dwnd_flag = true;
+		break;
+
+	case TLV_TYPE_NVM:
+		idx = 0;
+		data = tlv->data;
+		while (idx < length) {
+			tlv_nvm = (struct tlv_type_nvm *)(data + idx);
+			tag_id = le16_to_cpu(tlv_nvm->tag_id);
+			tag_len = le16_to_cpu(tlv_nvm->tag_len);
+
+			/* Update NVM tags as needed */
+			switch (tag_id) {
+			case EDL_TAG_ID_HCI:
+				/* HCI transport layer parameters
+				 * enabling software inband sleep
+				 * onto controller side.
+				 */
+				tlv_nvm->data[0] |= 0x80;
+
+				/* UART Baud Rate */
+				tlv_nvm->data[2] = config->user_baud_rate;
+				break;
+			case EDL_TAG_ID_DEEP_SLEEP:
+				/* Sleep enable mask
+				 * enabling deep sleep feature on controller.
+				 */
+				tlv_nvm->data[0] |= 0x01;
+				break;
+			}
+
+			idx += (sizeof(u16) + sizeof(u16) + 8 + tag_len);
+		}
+		break;
+	default:
+		BT_ERR("Unknown TLV type %d", config->type);
+		break;
+	}
+}
+
+static int cherokee_tlv_send_segment(struct hci_dev *hdev, int idx,
+					int seg_size, const u8 *data)
+{
+	u8 cmd[MAX_SIZE_PER_TLV_SEGMENT + 2];
+	int err = 0;
+
+ BT_DBG("%s: Download segment #%d size %d", hdev->name, idx, seg_size);
+
+	cmd[0] = EDL_PATCH_TLV_REQ_CMD;
+	cmd[1] = seg_size;
+	memcpy(cmd + 2, data, seg_size);
+
+	err = __hci_cmd_no_event(hdev, EDL_PATCH_CMD_OPCODE, seg_size + 2,
+					cmd);
+	if (err < 0) {
+		BT_ERR("%s: Failed to send TLV segment (%d)", hdev->name, err);
+		return err;
+	}
+
+	return err;
+}
+
+static int qca_btsoc_tlv_send_segment(struct hci_dev *hdev, int idx,
+					int seg_size, const u8 *data)
  {
  	struct sk_buff *skb;
  	struct edl_event_hdr *edl;
@@ -264,16 +313,56 @@ static int rome_tlv_download_request(struct hci_dev *hdev,
  	data = fw->data;
  	for (i = 0; i < total_segment; i++) {
  		buffer = data + i * MAX_SIZE_PER_TLV_SEGMENT;
-		ret = rome_tlv_send_segment(hdev, i, MAX_SIZE_PER_TLV_SEGMENT,
-					    buffer);
+		ret = qca_btsoc_tlv_send_segment(hdev, i,
+					MAX_SIZE_PER_TLV_SEGMENT, buffer);
  		if (ret < 0)
  			return -EIO;
  	}
    	if (remain_size) {
  		buffer = data + total_segment * MAX_SIZE_PER_TLV_SEGMENT;
-		ret = rome_tlv_send_segment(hdev, total_segment, remain_size,
-					    buffer);
+		ret = qca_btsoc_tlv_send_segment(hdev, total_segment,
+							remain_size, buffer);
+		if (ret < 0)
+			return -EIO;
+	}
+
+	return 0;
+}
+static int cherokee_tlv_download_request(struct hci_dev *hdev,
+			const struct firmware *fw)
+{
+	const u8 *buffer, *data;
+	int total_segment, remain_size;
+	int ret, i;
+
+	if (!fw || !fw->data)
+		return -EINVAL;
+
+	total_segment = fw->size / MAX_SIZE_PER_TLV_SEGMENT;
+	remain_size = fw->size % MAX_SIZE_PER_TLV_SEGMENT;
+
+	BT_DBG("%s: Total segment num %d remain size %d total size %zu",
+			hdev->name, total_segment, remain_size, fw->size);
+
+	data = fw->data;
+	for (i = 0; i < total_segment; i++) {
+		buffer = data + i * MAX_SIZE_PER_TLV_SEGMENT;
+		/* Read response from soc for last segment sent */
+		if (!remain_size && ((i+1) == total_segment))
+			ret = qca_btsoc_tlv_send_segment(hdev, i,
+					MAX_SIZE_PER_TLV_SEGMENT, buffer);
+		else
+			ret = cherokee_tlv_send_segment(hdev, i,
+					MAX_SIZE_PER_TLV_SEGMENT, buffer);
+		if (ret < 0)
+			return -EIO;
+	}
+
+	if (remain_size) {
+		buffer = data + total_segment * MAX_SIZE_PER_TLV_SEGMENT;
+		ret = qca_btsoc_tlv_send_segment(hdev, total_segment,
+							remain_size, buffer);
  		if (ret < 0)
  			return -EIO;
  	}
@@ -282,7 +371,7 @@ static int rome_tlv_download_request(struct hci_dev *hdev,
  }
    static int rome_download_firmware(struct hci_dev *hdev,
-				  struct rome_config *config)
+				  struct qca_config *config)
  {
  	const struct firmware *fw;
  	int ret;
@@ -309,7 +398,46 @@ static int rome_download_firmware(struct hci_dev *hdev,
  	return ret;
  }
-int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+static int cherokee_download_firmware(struct hci_dev *hdev,
+					struct qca_config *config)
+{
+	const struct firmware *fw;
+	bool dwnd_flag = true;
+	int ret;
+
+	BT_INFO("%s: wcn3990  Downloading %s", hdev->name, config->fwname);
+
+	ret = request_firmware(&fw, config->fwname, &hdev->dev);
+	if (ret) {
+		BT_ERR("%s: Failed to request file: %s (%d)", hdev->name,
+			config->fwname, ret);
+		return ret;
+	}
+
+	cherokee_tlv_check_data(config, fw, &dwnd_flag);
+	/* check whether the download flag is set.if bit is enabled
+	 * terminate the ram patch download. As we are not supporting,
+	 * receiving of response from soc for every segment sent.
+	 * We look for response from soc for last segment.
+	 */
+	if (dwnd_flag == true && config->type == TLV_TYPE_PATCH) {
+		BT_ERR("%s: btsoc download flag enabled", hdev->name);
+		return -EOPNOTSUPP;
+	}
+
+	ret = cherokee_tlv_download_request(hdev, fw);
+	if (ret) {
+		BT_ERR("%s: Failed to download file: %s (%d)", hdev->name,
+		config->fwname, ret);
+	}
+
+	release_firmware(fw);
+
+	return ret;
+}
+
+
+int qca_btsoc_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
  {
  	struct sk_buff *skb;
  	u8 cmd[9];
@@ -332,12 +460,12 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
    	return 0;
  }
-EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
+EXPORT_SYMBOL_GPL(qca_btsoc_set_bdaddr);
    int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate)
  {
  	u32 rome_ver = 0;
-	struct rome_config config;
+	struct qca_config config;
  	int err;
    	BT_DBG("%s: ROME setup on UART", hdev->name);
@@ -345,7 +473,7 @@ int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate)
  	config.user_baud_rate = baudrate;
    	/* Get ROME version information */
-	err = rome_patch_ver_req(hdev, &rome_ver);
+	err = qca_btsoc_patch_ver_req(hdev, &rome_ver);
  	if (err < 0 || rome_ver == 0) {
  		BT_ERR("%s: Failed to get version 0x%x", hdev->name, err);
  		return err;
@@ -374,7 +502,7 @@ int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate)
  	}
    	/* Perform HCI reset */
-	err = rome_reset(hdev);
+	err = qca_btsoc_reset(hdev);
  	if (err < 0) {
  		BT_ERR("%s: Failed to run HCI_RESET (%d)", hdev->name, err);
  		return err;
@@ -386,6 +514,111 @@ int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate)
  }
  EXPORT_SYMBOL_GPL(qca_uart_setup_rome);
  +int qca_btsoc_patch_ver_req(struct hci_dev *hdev, u32 *soc_version)
+{
+	struct sk_buff *skb;
+	struct edl_event_hdr *edl;
+	struct qca_btsoc_version *ver;
+	char cmd;
+	int err = 0;
+
+	BT_DBG("%s: BTSOC Patch Version Request", hdev->name);
+
+	cmd = EDL_PATCH_VER_REQ_CMD;
+ skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN,
+				&cmd, HCI_VENDOR_PKT, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		BT_ERR("%s: Failed to read version of ROME (%d)", hdev->name,
+		       err);
+		return err;
+	}
+
+	if (skb->len != sizeof(*edl) + sizeof(*ver)) {
+		BT_ERR("%s: Version size mismatch len %d", hdev->name,
+		       skb->len);
+		err = -EILSEQ;
+		goto out;
+	}
+
+	edl = (struct edl_event_hdr *)(skb->data);
+	if (!edl) {
+		BT_ERR("%s: TLV with no header", hdev->name);
+		err = -EILSEQ;
+		goto out;
+	}
+
+	if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
+	    edl->rtype != EDL_APP_VER_RES_EVT) {
+		BT_ERR("%s: Wrong packet received %d %d", hdev->name,
+		       edl->cresp, edl->rtype);
+		err = -EIO;
+		goto out;
+	}
+
+	ver = (struct qca_btsoc_version *)(edl->data);
+
+ BT_DBG("%s: Product:0x%08x", hdev->name, le32_to_cpu(ver->product_id)); + BT_DBG("%s: Patch :0x%08x", hdev->name, le16_to_cpu(ver->patch_ver)); + BT_DBG("%s: ROM :0x%08x", hdev->name, le16_to_cpu(ver->btsoc_ver));
+	BT_DBG("%s: SOC    :0x%08x", hdev->name, le32_to_cpu(ver->soc_id));
+
+	/* BTSOC chipset version can be decided by patch and SoC
+	 * version, combination with upper 2 bytes from SoC
+	 * and lower 2 bytes from patch will be used.
+	 */
+	*soc_version = (le32_to_cpu(ver->soc_id) << 16) |
+				(le16_to_cpu(ver->btsoc_ver) & 0x0000ffff);
+
+out:
+	kfree_skb(skb);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(qca_btsoc_patch_ver_req);
+
+int qca_uart_setup_cherokee(struct hci_dev *hdev, uint8_t baudrate,
+					u32 *cherokee_ver)
+{
+	struct qca_config config;
+	int err;
+
+	BT_DBG("%s: wcn3990 setup on UART", hdev->name);
+	config.user_baud_rate = baudrate;
+
+	/* Download rampatch file */
+	config.type = TLV_TYPE_PATCH;
+ snprintf(config.fwname, sizeof(config.fwname), "qca/rampatch_%08x.tlv",
+		*cherokee_ver);
+	err = cherokee_download_firmware(hdev, &config);
+	if (err < 0) {
+		BT_ERR("%s: Failed to download patch (%d)", hdev->name, err);
+		return err;
+	}
+
+	/* Download NVM configuration */
+	config.type = TLV_TYPE_NVM;
+	snprintf(config.fwname, sizeof(config.fwname), "qca/nvm_%08x.bin",
+		*cherokee_ver);
+	err = cherokee_download_firmware(hdev, &config);
+	if (err < 0) {
+		BT_ERR("%s: Failed to download NVM (%d)", hdev->name, err);
+		return err;
+	}
+
+	/* Perform HCI reset */
+	err = qca_btsoc_reset(hdev);
+	if (err < 0) {
+		BT_ERR("%s: Failed to run HCI_RESET (%d)", hdev->name, err);
+		return err;
+	}
+
+	BT_INFO("%s: wcn3990 setup on UART is completed", hdev->name);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qca_uart_setup_cherokee);
+
  MODULE_AUTHOR("Ben Young Tae Kim <ytkim@xxxxxxxxxxxxxxxx>");
MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
  MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 65e994b..7608423 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -1,7 +1,7 @@
  /*
   *  Bluetooth supports for Qualcomm Atheros ROME chips
   *
- *  Copyright (c) 2015 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2015, 2018 The Linux Foundation. All rights reserved.
   *
* This program is free software; you can redistribute it and/or modify
   *  it under the terms of the GNU General Public License version 2
@@ -37,6 +37,9 @@
  #define EDL_TAG_ID_HCI			(17)
  #define EDL_TAG_ID_DEEP_SLEEP		(27)
  +#define CHEROKEE_POWERON_PULSE		(0xFC)
+#define CHEROKEE_POWEROFF_PULSE		(0xC0)
+
  enum qca_bardrate {
  	QCA_BAUDRATE_115200 	= 0,
  	QCA_BAUDRATE_57600,
@@ -66,7 +69,7 @@ enum rome_tlv_type {
  	TLV_TYPE_NVM
  };
  -struct rome_config {
+struct qca_config {
  	u8 type;
  	char fwname[64];
  	uint8_t user_baud_rate;
@@ -78,13 +81,14 @@ struct edl_event_hdr {
  	__u8 data[0];
  } __packed;
  -struct rome_version {
+struct qca_btsoc_version {
  	__le32 product_id;
  	__le16 patch_ver;
-	__le16 rome_ver;
+	__le16 btsoc_ver;
  	__le32 soc_id;
  } __packed;
  +
  struct tlv_seg_resp {
  	__u8 result;
  } __packed;
@@ -102,6 +106,21 @@ struct tlv_type_patch {
  	__le32 entry;
  } __packed;
  +struct cherokee_tlv_type_patch {
+	__le32 total_size;
+	__le32 data_length;
+	__u8   format_version;
+	__u8   signature;
+	__u8   dwnd_cfg;
+	__le16 reserved1;
+	__le16 product_id;
+	__le16 rom_build;
+	__le16 patch_version;
+	__le16 reserved2;
+	__le32 entry;
+} __packed;
+
+
  struct tlv_type_nvm {
  	__le16 tag_id;
  	__le16 tag_len;
@@ -115,14 +134,21 @@ struct tlv_type_hdr {
  	__u8   data[0];
  } __packed;
  +int qca_btsoc_cleanup(struct hci_dev *hdev);
+int btqca_power_setup(bool on);
+
  #if IS_ENABLED(CONFIG_BT_QCA)
-int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr); +int qca_btsoc_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
  int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate);
+int qca_uart_setup_cherokee(struct hci_dev *hdev, uint8_t baudrate,
+				u32 *cherokee_ver);
+int qca_btsoc_patch_ver_req(struct hci_dev *hdev, u32 *soc_version);
    #else
-static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+static inline int qca_btsoc_set_bdaddr(struct hci_dev *hdev,
+						const bdaddr_t *bdaddr)
  {
  	return -EOPNOTSUPP;
  }
@@ -132,4 +158,15 @@ static inline int qca_uart_setup_rome(struct hci_dev *hdev, int speed)
  	return -EOPNOTSUPP;
  }
  +static inline int qca_uart_setup_cherokee(struct hci_dev *hdev,
+					uint8_t baudrate, u32 *cherokee_ver)
+{
+	return -EOPNOTSUPP;
+}
+
+static int qca_btsoc_patch_ver_req(struct hci_dev *hdev, u32 *cherokee_version)
+{
+	return -EOPNOTSUPP;
+}
+
  #endif
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index b7547e6..1343e63 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -5,7 +5,7 @@
   *  protocol extension to H4.
   *
   *  Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (c) 2010, 2012 The Linux Foundation. All rights reserved. + * Copyright (c) 2010, 2012, 2018 The Linux Foundation. All rights reserved.
   *
   *  Acknowledgements:
   *  This file is based on hci_ll.c, which was...
@@ -35,9 +35,15 @@
  #include <linux/mod_devicetable.h>
  #include <linux/module.h>
  #include <linux/serdev.h>
-
  #include <net/bluetooth/bluetooth.h>
  #include <net/bluetooth/hci_core.h>
+#include <asm-generic/delay.h>
+#include <linux/tty.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_device.h>
    #include "hci_uart.h"
  #include "btqca.h"
@@ -84,12 +90,12 @@ struct qca_data {
  	struct hci_uart *hu;
  	struct sk_buff *rx_skb;
  	struct sk_buff_head txq;
-	struct sk_buff_head tx_wait_q;	/* HCI_IBS wait queue	*/
-	spinlock_t hci_ibs_lock;	/* HCI_IBS state lock	*/
-	u8 tx_ibs_state;	/* HCI_IBS transmit side power state*/
-	u8 rx_ibs_state;	/* HCI_IBS receive side power state */
-	bool tx_vote;		/* Clock must be on for TX */
-	bool rx_vote;		/* Clock must be on for RX */
+	struct sk_buff_head tx_wait_q;  /* HCI_IBS wait queue   */
+	spinlock_t hci_ibs_lock;        /* HCI_IBS state lock   */
+	u8 tx_ibs_state;        /* HCI_IBS transmit side power state*/
+	u8 rx_ibs_state;        /* HCI_IBS receive side power state */
+	bool tx_vote;           /* Clock must be on for TX */
+	bool rx_vote;           /* Clock must be on for RX */
  	struct timer_list tx_idle_timer;
  	u32 tx_idle_delay;
  	struct timer_list wake_retrans_timer;
@@ -119,12 +125,49 @@ struct qca_data {
  	u64 votes_off;
  };
  +enum btqca_soc_t {
+	BTQCA_INVALID = -1,
+	BTQCA_AR3002,
+	BTQCA_ROME,
+	BTQCA_CHEROKEE
+};
+
  struct qca_serdev {
  	struct hci_uart	 serdev_hu;
  	struct gpio_desc *bt_en;
  	struct clk	 *susclk;
+	enum btqca_soc_t btsoc_type;
+};
+
+/*
+ * voltage regulator information required for configuring the
+ * QCA bluetooth chipset
+ */
+struct btqca_vreg {
+	const char *name;
+	unsigned int min_v;
+	unsigned int max_v;
+	unsigned int load_ua;
  };
  +struct btqca_vreg_data {
+	enum btqca_soc_t soc_type;
+	struct btqca_vreg *vregs;
+	size_t num_vregs;
+};
+
+/*
+ * Platform data for the QCA bluetooth power driver.
+ */
+struct btqca_power {
+	struct device *dev;
+	struct btqca_vreg_data *vreg_data;
+	struct regulator_bulk_data *vreg_bulk;
+	bool vreg_status;
+};
+
+static struct btqca_power *qca;
+
  static void __serial_clock_on(struct tty_struct *tty)
  {
  	/* TODO: Some chipset requires to enable UART clock on client
@@ -462,9 +505,11 @@ static int qca_open(struct hci_uart *hu)
    	if (hu->serdev) {
  		serdev_device_open(hu->serdev);
-
  		qcadev = serdev_device_get_drvdata(hu->serdev);
-		gpiod_set_value_cansleep(qcadev->bt_en, 1);
+		if (qcadev->btsoc_type == BTQCA_CHEROKEE)
+			btqca_power_setup(true);
+		else
+			gpiod_set_value_cansleep(qcadev->bt_en, 1);
  	}
    	BT_DBG("HCI_UART_QCA open, tx_idle_delay=%u, wake_retrans=%u",
@@ -553,7 +598,10 @@ static int qca_close(struct hci_uart *hu)
  		serdev_device_close(hu->serdev);
    		qcadev = serdev_device_get_drvdata(hu->serdev);
-		gpiod_set_value_cansleep(qcadev->bt_en, 0);
+		if (qcadev->btsoc_type == BTQCA_CHEROKEE)
+			qca_btsoc_cleanup(hu->hdev);
+		else
+			gpiod_set_value_cansleep(qcadev->bt_en, 0);
  	}
    	kfree_skb(qca->rx_skb);
@@ -873,6 +921,8 @@ static uint8_t qca_get_baudrate_value(int speed)
  		return QCA_BAUDRATE_2000000;
  	case 3000000:
  		return QCA_BAUDRATE_3000000;
+	case 3200000:
+		return QCA_BAUDRATE_3200000;
  	case 3500000:
  		return QCA_BAUDRATE_3500000;
  	default:
@@ -887,7 +937,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
  	struct sk_buff *skb;
  	u8 cmd[] = { 0x01, 0x48, 0xFC, 0x01, 0x00 };
  -	if (baudrate > QCA_BAUDRATE_3000000)
+	if (baudrate > QCA_BAUDRATE_3200000)
  		return -EINVAL;
    	cmd[4] = baudrate;
@@ -924,62 +974,263 @@ static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed)
  		hci_uart_set_baudrate(hu, speed);
  }
  +static int qca_send_poweron_cmd(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct qca_data *qca = hu->priv;
+	struct sk_buff *skb;
+	u8 cmd;
+
+	BT_DBG("%s sending power on command to btsoc", hdev->name);
+	/* By sending 0xFC host is trying to power up the soc */
+	cmd = CHEROKEE_POWERON_PULSE;
+	skb = bt_skb_alloc(sizeof(cmd), GFP_ATOMIC);
+	if (!skb) {
+		BT_ERR("Failed to allocate memory for skb  packet");
+		return -ENOMEM;
+	}
+
+	skb_put_data(skb, &cmd, sizeof(cmd));
+	hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
+
+	skb_queue_tail(&qca->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	/* Wait for 100 us for soc to settle down */
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout(usecs_to_jiffies(100));
+	set_current_state(TASK_INTERRUPTIBLE);
+
+	return 0;
+}
+
+static int qca_send_poweroff_cmd(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct qca_data *qca = hu->priv;
+	struct sk_buff *skb;
+	u8 cmd;
+
+	BT_DBG("%s sending power off command to btsoc", hdev->name);
+	/* By sending 0xC0 host is trying to power off the soc */
+	cmd = CHEROKEE_POWEROFF_PULSE;
+	skb = bt_skb_alloc(sizeof(cmd), GFP_ATOMIC);
+	if (!skb) {
+		BT_ERR("Failed to allocate memory for skb  packet");
+		return -ENOMEM;
+	}
+
+	skb_put_data(skb, &cmd, sizeof(cmd));
+	hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
+
+	skb_queue_tail(&qca->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	/* Wait for 100 us for soc to settle down */
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout(usecs_to_jiffies(100));
+	set_current_state(TASK_INTERRUPTIBLE);
+
+	return 0;
+}
+
+static int qca_serdev_open(struct hci_uart *hu)
+{
+	int ret = 0;
+
+	if (hu->serdev)
+		serdev_device_open(hu->serdev);
+	else {
+		BT_ERR("%s:open operation not supported", hu->hdev->name);
+		ret = 1;
+	}
+
+	return ret;
+}
+
+int qca_btsoc_cleanup(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+
+	/* change host baud rate before sending power off command */
+	host_set_baudrate(hu, 2400);
+	/* send 0xC0 command to btsoc before turning off regulators */
+	qca_send_poweroff_cmd(hdev);
+	/* turn off btsoc */
+	return btqca_power_setup(false);
+}
+
+static int qca_serdev_close(struct hci_uart *hu)
+{
+	int ret = 0;
+
+	if (hu->serdev)
+		serdev_device_close(hu->serdev);
+	else {
+		BT_ERR("%s:close operation not supported", hu->hdev->name);
+		ret = 1;
+	}
+
+	return ret;
+}
+
  static int qca_setup(struct hci_uart *hu)
  {
  	struct hci_dev *hdev = hu->hdev;
  	struct qca_data *qca = hu->priv;
+	struct qca_serdev *qcadev;
  	unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
  	int ret;
+	unsigned int  soc_ver;
+
+	qcadev = serdev_device_get_drvdata(hu->serdev);
+
+	switch (qcadev->btsoc_type) {
+	case BTQCA_CHEROKEE:
+
+		BT_INFO("%s:setting up wcn3990", hdev->name);
+		/* Patch downloading has to be done without IBS mode */
+		clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+		/* Setup initial baudrate */
+		speed = 0;
+		if (hu->init_speed)
+			speed = hu->init_speed;
+		else if (hu->proto->init_speed)
+			speed = hu->proto->init_speed;
+
+		if (speed)
+			host_set_baudrate(hu, speed);
+		else {
+			BT_ERR("%s:initial speed %u", hdev->name, speed);
+			return -1;
+		}
  -	BT_INFO("%s: ROME setup", hdev->name);
+		/* clear flow control- for sync cmd*/
+		hci_uart_set_flow_control(hu, true);
+		/* send poweron command to btsoc */
+		ret = qca_send_poweron_cmd(hdev);
+		if (ret) {
+			BT_ERR("%s:sending sync command failed", hdev->name);
+			return ret;
+		}
+
+		/* close port */
+		ret = qca_serdev_close(hu);
+		if (ret)
+			return ret;
+		/* reopen port */
+		ret = qca_serdev_open(hu);
+		if (ret)
+			return ret;
+		/* Setup initial baudrate */
+		speed = 0;
+		if (hu->init_speed)
+			speed = hu->init_speed;
+		else if (hu->proto->init_speed)
+			speed = hu->proto->init_speed;
+		if (speed)
+			host_set_baudrate(hu, speed);
+		else {
+			BT_ERR("%s:initial speed %u", hdev->name, speed);
+			return -1;
+		}
  -	/* Patch downloading has to be done without IBS mode */
-	clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+		/* Enable flow control */
+		hci_uart_set_flow_control(hu, false);
+		/*  wait until flow control settled */
+		mdelay(100);
  -	/* Setup initial baudrate */
-	speed = 0;
-	if (hu->init_speed)
-		speed = hu->init_speed;
-	else if (hu->proto->init_speed)
-		speed = hu->proto->init_speed;
+		ret = qca_btsoc_patch_ver_req(hdev, &soc_ver);
+		if (ret < 0 || soc_ver == 0) {
+			BT_ERR("%s: Failed to get version 0x%x", hdev->name,
+				ret);
+			return ret;
+		}
  -	if (speed)
-		host_set_baudrate(hu, speed);
+		BT_INFO("%s:wcn3990 controller version 0x%08x", hdev->name,
+			soc_ver);
  -	/* Setup user speed if needed */
-	speed = 0;
-	if (hu->oper_speed)
-		speed = hu->oper_speed;
-	else if (hu->proto->oper_speed)
+		/* clear flow control */
+		hci_uart_set_flow_control(hu, true);
+		/* set operating speed */
  		speed = hu->proto->oper_speed;
+		if (speed) {
+			qca_baudrate = qca_get_baudrate_value(speed);
+			BT_INFO("%s: Set UART speed to %d", hdev->name, speed);
+			ret = qca_set_baudrate(hdev, qca_baudrate);
+			if (ret) {
+				BT_ERR("%s:Failed to change the baud rate(%d)",
+					hdev->name, ret);
+				return ret;
+			}
+			if (speed)
+				host_set_baudrate(hu, speed);
+			else {
+				BT_ERR("%s:Error in setting operator speed:%u",
+					hdev->name, speed);
+				return -1;
+			}
+		}
  -	if (speed) {
-		qca_baudrate = qca_get_baudrate_value(speed);
+		/* Set flow control */
+		hci_uart_set_flow_control(hu, false);
+		/*Setup patch and  NVM configurations */
+		ret = qca_uart_setup_cherokee(hdev, qca_baudrate, &soc_ver);
+		if (!ret) {
+			set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+			qca_debugfs_init(hdev);
+		}
  -		BT_INFO("%s: Set UART speed to %d", hdev->name, speed);
-		ret = qca_set_baudrate(hdev, qca_baudrate);
-		if (ret) {
-			BT_ERR("%s: Failed to change the baud rate (%d)",
-			       hdev->name, ret);
-			return ret;
+		/* Setup wcn3990 bdaddr */
+		hu->hdev->set_bdaddr = qca_btsoc_set_bdaddr;
+
+		return ret;
+
+	default:
+		BT_INFO("%s: ROME setup", hdev->name);
+		/* Patch downloading has to be done without IBS mode */
+		clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+		/* Setup initial baudrate */
+		speed = 0;
+		if (hu->init_speed)
+			speed = hu->init_speed;
+		else if (hu->proto->init_speed)
+			speed = hu->proto->init_speed;
+		if (speed)
+			hci_uart_set_baudrate(hu, speed);
+
+		/* Setup user speed if needed */
+		speed = 0;
+		if (hu->oper_speed)
+			speed = hu->oper_speed;
+		else if (hu->proto->oper_speed)
+			speed = hu->proto->oper_speed;
+
+		if (speed) {
+			qca_baudrate = qca_get_baudrate_value(speed);
+
+			BT_INFO("%s: Set UART speed to %d", hdev->name, speed);
+			ret = qca_set_baudrate(hdev, qca_baudrate);
+			if (ret) {
+				BT_ERR("%s:Failed to change the baud rate(%d)",
+					hdev->name, ret);
+					return ret;
+				}
+			host_set_baudrate(hu, speed);
  		}
-		host_set_baudrate(hu, speed);
-	}
  -	/* Setup patch / NVM configurations */
-	ret = qca_uart_setup_rome(hdev, qca_baudrate);
-	if (!ret) {
-		set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
-		qca_debugfs_init(hdev);
-	} else if (ret == -ENOENT) {
-		/* No patch/nvm-config found, run with original fw/config */
-		ret = 0;
-	}
+		/* Setup patch / NVM configurations */
+		ret = qca_uart_setup_rome(hdev, qca_baudrate);
+		if (!ret) {
+			set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+			qca_debugfs_init(hdev);
+		}
  -	/* Setup bdaddr */
-	hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
+		/* Setup bdaddr */
+		hu->hdev->set_bdaddr = qca_btsoc_set_bdaddr;
  -	return ret;
+		return ret;
+	}
  }
    static struct hci_uart_proto qca_proto = {
@@ -997,42 +1248,142 @@ static int qca_setup(struct hci_uart *hu)
  	.dequeue	= qca_dequeue,
  };
  +static const struct btqca_vreg_data cherokee_data = {
+	.soc_type = BTQCA_CHEROKEE,
+	.vregs = (struct btqca_vreg []) {
+		{ "vddio",   1352000, 1352000,  0 },
+		{ "vddxtal", 1904000, 2040000,  0 },
+		{ "vddcore", 1800000, 1800000,  1 },
+		{ "vddpa",   130400,  1304000,  1 },
+		{ "vddldo",  3000000, 3312000,  1 },
+		{ "vddpwd",  3312000, 3600000,  0 },
+	},
+	.num_vregs = 6,
+};
+
+int btqca_power_setup(bool on)
+{
+	int ret = 0;
+	int i;
+	struct btqca_vreg *vregs;
+
+	if (!qca || !qca->vreg_data || !qca->vreg_bulk)
+		return -EINVAL;
+	vregs = qca->vreg_data->vregs;
+
+	BT_DBG("on: %d", on);
+
+	/* turn on if regualtors are off */
+	if (on == true && qca->vreg_status == false) {
+		qca->vreg_status = true;
+		for (i = 0; i < qca->vreg_data->num_vregs; i++) {
+			regulator_set_voltage(qca->vreg_bulk[i].consumer,
+					      vregs[i].min_v,
+					      vregs[i].max_v);
+
+			if (vregs[i].load_ua)
+				regulator_set_load(qca->vreg_bulk[i].consumer,
+						   vregs[i].load_ua);
+
+			regulator_enable(qca->vreg_bulk[i].consumer);
+		}
+	} else if (on == false && qca->vreg_status == true) {
+		qca->vreg_status = false;
+		for (i = 0; i < qca->vreg_data->num_vregs; i++) {
+			regulator_disable(qca->vreg_bulk[i].consumer);
+			regulator_set_voltage(qca->vreg_bulk[i].consumer,
+						0, vregs[i].max_v);
+			if (vregs[i].load_ua)
+				regulator_set_load(qca->vreg_bulk[i].consumer,
+						   0);
+		}
+	}
+
+	return ret;
+}
+
+static int init_regulators(struct btqca_power *qca,
+			   const struct btqca_vreg *vregs,
+			   size_t num_vregs)
+{
+	int i;
+
+	qca->vreg_bulk = devm_kzalloc(qca->dev, num_vregs *
+					sizeof(struct regulator_bulk_data),
+					GFP_KERNEL);
+	if (!qca->vreg_bulk)
+		return -ENOMEM;
+
+	for (i = 0; i < num_vregs; i++)
+		qca->vreg_bulk[i].supply = vregs[i].name;
+
+	return devm_regulator_bulk_get(qca->dev, num_vregs, qca->vreg_bulk);
+}
+
  static int qca_serdev_probe(struct serdev_device *serdev)
  {
  	struct qca_serdev *qcadev;
-	int err;
+	struct btqca_vreg_data *data;
+	int err = 0;
    	qcadev = devm_kzalloc(&serdev->dev, sizeof(*qcadev), GFP_KERNEL);
  	if (!qcadev)
  		return -ENOMEM;
    	qcadev->serdev_hu.serdev = serdev;
+	data = of_device_get_match_data(&serdev->dev);
+	if (data && data->soc_type == BTQCA_CHEROKEE)
+		qcadev->btsoc_type = BTQCA_CHEROKEE;
+	else
+		qcadev->btsoc_type = BTQCA_ROME;
+
  	serdev_device_set_drvdata(serdev, qcadev);
+	if (qcadev->btsoc_type == BTQCA_CHEROKEE) {
+		qca = kzalloc(sizeof(struct btqca_power), GFP_KERNEL);
+		if (!qca)
+			return -ENOMEM;
+
+		qca->dev = &serdev->dev;
+		qca->vreg_data = data;
+		err = init_regulators(qca, data->vregs, data->num_vregs);
+		if (err) {
+			BT_ERR("Failed to init regualtors:%d", err);
+			kfree(qca);
+		}
  -	qcadev->bt_en = devm_gpiod_get(&serdev->dev, "enable",
-				       GPIOD_OUT_LOW);
-	if (IS_ERR(qcadev->bt_en)) {
-		dev_err(&serdev->dev, "failed to acquire enable gpio\n");
-		return PTR_ERR(qcadev->bt_en);
-	}
+		/* set voltage regulator status as false */
+		qca->vreg_status = false;
+		err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
+		if (err) {
+			BT_ERR("wcn3990 serdev registration failed");
+			kfree(qca);
+		}
+	} else {
+		qcadev->bt_en = devm_gpiod_get(&serdev->dev, "enable",
+					       GPIOD_OUT_LOW);
+		if (IS_ERR(qcadev->bt_en)) {
+			dev_err(&serdev->dev, "failed to acquire enable gpio\n");
+			return PTR_ERR(qcadev->bt_en);
+		}
  -	qcadev->susclk = devm_clk_get(&serdev->dev, NULL);
-	if (IS_ERR(qcadev->susclk)) {
-		dev_err(&serdev->dev, "failed to acquire clk\n");
-		return PTR_ERR(qcadev->susclk);
-	}
+		qcadev->susclk = devm_clk_get(&serdev->dev, NULL);
+		if (IS_ERR(qcadev->susclk)) {
+			dev_err(&serdev->dev, "failed to acquire clk\n");
+			return PTR_ERR(qcadev->susclk);
+		}
  -	err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
-	if (err)
-		return err;
+		err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
+		if (err)
+			return err;
  -	err = clk_prepare_enable(qcadev->susclk);
-	if (err)
-		return err;
+		err = clk_prepare_enable(qcadev->susclk);
+		if (err)
+			return err;
  -	err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
-	if (err)
-		clk_disable_unprepare(qcadev->susclk);
+		err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
+		if (err)
+			clk_disable_unprepare(qcadev->susclk);
+	}
    	return err;
  }
@@ -1042,12 +1393,16 @@ static void qca_serdev_remove(struct serdev_device *serdev)
  	struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
    	hci_uart_unregister_device(&qcadev->serdev_hu);
-
-	clk_disable_unprepare(qcadev->susclk);
+	if (qcadev->btsoc_type == BTQCA_CHEROKEE) {
+		btqca_power_setup(false);
+		kfree(qca);
+	} else
+		clk_disable_unprepare(qcadev->susclk);
  }
    static const struct of_device_id qca_bluetooth_of_match[] = {
  	{ .compatible = "qcom,qca6174-bt" },
+	{ .compatible = "qca,wcn3990-bt", .data = &cherokee_data},
  	{ /* sentinel */ }
  };
  MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index c10cb79..b932ec50 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1418,7 +1418,8 @@ struct sk_buff *__hci_cmd_sync(struct hci_dev *hdev, u16 opcode, u32 plen,
  			       const void *param, u32 timeout);
struct sk_buff *__hci_cmd_sync_ev(struct hci_dev *hdev, u16 opcode, u32 plen,
  				  const void *param, u8 event, u32 timeout);
-
+int __hci_cmd_no_event(struct hci_dev *hdev, u16 opcode, u32 plen,
+			const void *param);
  int hci_send_cmd(struct hci_dev *hdev, __u16 opcode, __u32 plen,
  		 const void *param);
void hci_send_acl(struct hci_chan *chan, struct sk_buff *skb, __u16 flags);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 97ef85e..8addd97 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3370,7 +3370,7 @@ int hci_unregister_cb(struct hci_cb *cb)
  }
  EXPORT_SYMBOL(hci_unregister_cb);
-static void hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+void hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
  {
  	int err;
diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
index f7d6ba6..1ffee59a 100644
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -114,6 +114,29 @@ void hci_req_sync_cancel(struct hci_dev *hdev, int err)
  	}
  }
  +/*  Queue a frame to an asynchronous transfer to btdevice,
+ *  with out any event from btdevice.
+ */
+int __hci_cmd_no_event(struct hci_dev *hdev, u16 opcode, u32 plen,
+		       const void *param)
+{
+	struct sk_buff *skb;
+
+	BT_DBG("%s opcode 0x%4.4x plen %d", hdev->name, opcode, plen);
+
+	skb = hci_prepare_cmd(hdev, opcode, plen, param);
+	if (!skb) {
+		BT_ERR("%s no memory for command (opcode 0x%4.4x)",
+		       hdev->name, opcode);
+		return -ENOMEM;
+	}
+
+	hci_send_frame(hdev, skb);
+
+	return 0;
+}
+EXPORT_SYMBOL(__hci_cmd_no_event);
+
struct sk_buff *__hci_cmd_sync_ev(struct hci_dev *hdev, u16 opcode, u32 plen,
  				  const void *param, u8 event, u32 timeout)
  {
diff --git a/net/bluetooth/hci_request.h b/net/bluetooth/hci_request.h
index dde77bd..a855edd 100644
--- a/net/bluetooth/hci_request.h
+++ b/net/bluetooth/hci_request.h
@@ -128,3 +128,5 @@ static inline u16 eir_append_le16(u8 *eir, u16 eir_len, u8 type, u16 data)
    	return eir_len;
  }
+
+void hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb);


Regards
Balakrishna.
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux