On 18/04/2018 18:34, srinivas.kandagatla@xxxxxxxxxx wrote:
From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Remove the usage of IRQ_TYPE_NONE to fix loud warnings from
patch (83a86fbb5b56b "irqchip/gic: Loudly complain about
the use of IRQ_TYPE_NONE").
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index cfbd72186762..5d66a575c7e1 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
Reviewed-by: Thierry Escande <thierry.escande@xxxxxxxxxx>
Also successfully tested on dragonboard 410c so:
Tested-by: Thierry Escande <thierry.escande@xxxxxxxxxx>
@@ -180,7 +180,7 @@
pmu {
compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
};
thermal-zones {
@@ -513,7 +513,7 @@
blsp_i2c2: i2c@78b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b6000 0x500>;
- interrupts = <GIC_SPI 96 0>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
clock-names = "iface", "core";
@@ -528,7 +528,7 @@
blsp_i2c4: i2c@78b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b8000 0x500>;
- interrupts = <GIC_SPI 98 0>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
clock-names = "iface", "core";
@@ -543,7 +543,7 @@
blsp_i2c6: i2c@78ba000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078ba000 0x500>;
- interrupts = <GIC_SPI 100 0>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
clock-names = "iface", "core";
@@ -575,7 +575,7 @@
"mi2s-bit-clk3";
#sound-dai-cells = <1>;
- interrupts = <0 160 0>;
+ interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "lpass-irq-lpaif";
reg = <0x07708000 0x10000>;
reg-names = "lpass-lpaif";
@@ -595,7 +595,7 @@
reg = <0x07824900 0x11c>, <0x07824000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <0 123 0>, <0 138 0>;
+ interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>, <0 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>,
@@ -612,7 +612,7 @@
reg = <0x07864900 0x11c>, <0x07864000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <0 125 0>, <0 221 0>;
+ interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, <0 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>,
@@ -819,7 +819,7 @@
iommu-ctx@2000 {
compatible = "qcom,msm-iommu-v1-ns";
reg = <0x2000 0x1000>;
- interrupts = <GIC_SPI 242 0>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -864,7 +864,7 @@
"bus_clk",
"vsync_clk";
- interrupts = <0 72 0>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
