Quoting Manu Gautam (2018-04-18 09:38:41) > Hi Amit, > > > On 4/18/2018 6:33 PM, Amit Nischal wrote: > >>> + /* Disable the GPLL0 active input to MMSS and GPU via MISC registers */ > >>> + regmap_update_bits(regmap, 0x09ffc, 0x3, 0x3); > >>> + regmap_update_bits(regmap, 0x71028, 0x3, 0x3); > >> > >> I think we'll have to throw in the pipe clk branch stuff in here too? > >> And then drop the pipe clks from the driver? > > > > All the USB pipe clocks would be taken care. The PCIE pipe branch > > clocks would have to be explicitly disabled so as to retain the > > memory logic. Otherwise, it would lead to memory corruption in case > > the external source is directly disabled without disabling the branch clock. > > PHY driver is same for both USB and PCIE and both PHYs use pipe_clk. > If there is indeed some limitation and pipe_clk cant be left enabled > always then I will suggest to not change pipe_clk handling for USB as well. > Right. This is concerning if we have a half way solution. Just to clarify my understanding, are you saying that the pcie pipe clks are also tied to the memory logic and so toggling them on/off is used to reset the memories inside the phy? Or the memories inside the controller? What is the pipe clk clocking in these cases? -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
