Re: [PATCH 1/1] scsi/ufs: qcom: Don't enable PHY_QCOM_UFS by default

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon 09 Apr 23:31 PDT 2018, Vivek Gautam wrote:

> 
> 
> On 4/10/2018 1:39 AM, Bjorn Andersson wrote:
> > On Mon 09 Apr 10:38 PDT 2018, Vivek Gautam wrote:
> > > On 4/9/2018 10:21 PM, Bjorn Andersson wrote:
> > > > On Mon 09 Apr 06:24 PDT 2018, Vivek Gautam wrote:
> > [..]
> > > > > diff --git a/include/linux/phy/phy-qcom-ufs.h b/include/linux/phy/phy-qcom-ufs.h
> > > > > index 0a2c18a9771d..1388c2a2965e 100644
> > > > > --- a/include/linux/phy/phy-qcom-ufs.h
> > > > > +++ b/include/linux/phy/phy-qcom-ufs.h
> > > > > @@ -31,8 +31,21 @@ void ufs_qcom_phy_enable_dev_ref_clk(struct phy *phy);
> > > > >     */
> > > > >    void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy);
> > > > > +#if IS_ENABLED(CONFIG_PHY_QCOM_UFS)
> > > > >    int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes);
> > > > >    void ufs_qcom_phy_save_controller_version(struct phy *phy,
> > > > > -			u8 major, u16 minor, u16 step);
> > > > > +					  u8 major, u16 minor, u16 step);
> > > > > +#else
> > > > > +static inline int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes)
> > > > > +{
> > > > > +	return -ENOSYS;
> > > > > +}
> > > > > +
> > > > > +static inline void ufs_qcom_phy_save_controller_version(struct phy *phy,
> > > > > +							u8 major, u16 minor,
> > > > > +							u16 step)
> > > > > +{
> > > > > +}
> > > > > +#endif /* PHY_QCOM_UFS */
> > > > What's the timeline for getting rid of the references to these
> > > > functions? I presume that code depending on these being here will
> > > > compile but won't actually work?
> > > Yes, these inline definitions are just to keep ufs-qcom happy with the
> > > direct
> > > calls that it makes to these functions.
> > > As you would know these couple of functions are just used by the 20nm phy.
> > > However, we don't have any platform yet in the upstream that enables this
> > > phy.
> > > I am hoping that we will eventually get rid of these functions when we
> > > further
> > > clean up ufs-qcom driver.
> > > 
> > I see, but that means that we're calling this function with a struct phy
> > that might not be a struct ufs_qcom_phy and as such a defconfig with
> > both enabled will have undefined outcome for the migrated phys.
> 
> No, we will have to add support for separate phys as sdm845 has phy per each
> lane,
> and the older struct phy will exist alongside.
> We will call this function only with the older phy pointer.
> 
> > In particular we do expect that the same kernel will boot on db820c and
> > sdm845-mtp, so we will have to enable support for the 14nm & 20nm phy
> > driver (and we don't want random crashes because someone happened to
> > enable it).
> 
> Right, so we create new struct phy while keeping older one intact to keep
> the
> ufs-qcom work with both - ufs_qcom_phy and qmp_phy.
> Some of the controller drivers, such as usb/dwc3/ keep support for old and
> new phys,
> although there the difference is between generic phy and the usb-phy.
> So, I am assuming that if we want to keep ufs-qcom on platforms using 20nm,
> 14nm and 10nm phys happy, we will have to keep the phys separately for
> sometime.
> What do you say about it?
> 

My concern is only that the UFS HCI driver doesn't have a way to know if
it's the new or old "type" of phy, but if you can get that working then
I don't have any objections about doing so for a transitional period.

But, you may not use kernel config options to handle this, the same
Image should boot on msm8916, msm8996 and sdm845 (with appropriate dtb
for each one).

> On db820c, we can still work with the ufs_qcom_phy.
> 

I do not have an issue with that.

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux