Quoting Karthikeyan Ramasubramanian (2018-04-09 12:38:41)
> Add early console support in Qualcomm Technologies Inc., GENI based
> UART controller.
>
> Signed-off-by: Karthikeyan Ramasubramanian <kramasub@xxxxxxxxxxxxxx>
> Signed-off-by: Girish Mahadevan <girishm@xxxxxxxxxxxxxx>
> ---
> drivers/tty/serial/qcom_geni_serial.c | 85 ++++++++++++++++++++++++++++++++++-
> 1 file changed, 83 insertions(+), 2 deletions(-)
This patch needs to update the earlycon section of
Documentation/admin-guide/kernel-parameters.txt as well.
>
> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
> index e40d4a4..2ce83a57 100644
> --- a/drivers/tty/serial/qcom_geni_serial.c
> +++ b/drivers/tty/serial/qcom_geni_serial.c
> @@ -196,8 +196,18 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
> timeout_us = ((fifo_bits * USEC_PER_SEC) / baud) + 500;
> }
>
> - return !readl_poll_timeout_atomic(uport->membase + offset, reg,
> - (bool)(reg & field) == set, 10, timeout_us);
> + /*
> + * Use custom implementation instead of readl_poll_atomic since ktimer
> + * is not ready at the time of early console.
> + */
> + while (timeout_us) {
> + reg = readl_relaxed(uport->membase + offset);
> + if ((bool)(reg & field) == set)
Is the cast needed?
> + return true;
> + udelay(10);
> + timeout_us -= 10;
> + }
> + return false;
> }
>
> static void qcom_geni_serial_setup_tx(struct uart_port *uport, u32 xmit_size)
> @@ -944,6 +954,77 @@ static int __init qcom_geni_console_setup(struct console *co, char *options)
> return uart_set_options(uport, co, baud, parity, bits, flow);
> }
[...]
> + writel_relaxed(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN);
> + writel_relaxed(ser_clk_cfg, uport->membase + GENI_SER_M_CLK_CFG);
> + writel_relaxed(ser_clk_cfg, uport->membase + GENI_SER_S_CLK_CFG);
> +
> + dev->con->write = qcom_geni_serial_earlycon_write;
> + dev->con->setup = NULL;
> + return 0;
> +}
> +OF_EARLYCON_DECLARE(qcom_serial, "qcom,geni-debug-uart",
Maybe geni_serial instead? Or qcom_geni? earlycon sort of implies serial
already so it seems redundant. And yes I messed that up for msm_serial
but it doesn't mean we should repeat the same mistake again.
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
