Currently the DSI PHY timings are hard-coded for a specific panel
for the 10nm PHY.
Replace this with the auto PHY timing calculator which can calculate
the PHY timings for any panel.
Changes in v3:
- None
Changes in v2:
- None
Reviewed-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
Reviewed-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
Signed-off-by: Abhinav Kumar <abhinavk@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 109 +++++++++++++++++++++++++++++
drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 2 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 28 --------
3 files changed, 111 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 8e9d5c2..9a9fa0c 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -265,6 +265,115 @@ int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,
return 0;
}
+int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
+ struct msm_dsi_phy_clk_request *clk_req)
+{
+ const unsigned long bit_rate = clk_req->bitclk_rate;
+ const unsigned long esc_rate = clk_req->escclk_rate;
+ s32 ui, ui_x8, lpx;
+ s32 tmax, tmin;
+ s32 pcnt0 = 50;
+ s32 pcnt1 = 50;
+ s32 pcnt2 = 10;
+ s32 pcnt3 = 30;
+ s32 pcnt4 = 10;
+ s32 pcnt5 = 2;
+ s32 coeff = 1000; /* Precision, should avoid overflow */
+ s32 hb_en, hb_en_ckln;
+ s32 temp;
+
+ if (!bit_rate || !esc_rate)
+ return -EINVAL;
+
+ timing->hs_halfbyte_en = 0;
+ hb_en = 0;
+ timing->hs_halfbyte_en_ckln = 0;
+ hb_en_ckln = 0;
+
+ ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+ ui_x8 = ui << 3;
+ lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
+
+ temp = S_DIV_ROUND_UP(38 * coeff, ui_x8);
+ tmin = max_t(s32, temp, 0);
+ temp = (95 * coeff) / ui_x8;
+ tmax = max_t(s32, temp, 0);
+ timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
+
+ temp = 300 * coeff - (timing->clk_prepare << 3) * ui;
+ tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = (tmin > 255) ? 511 : 255;
+ timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
+
+ tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
+ temp = 105 * coeff + 12 * ui - 20 * coeff;
+ tmax = (temp + 3 * ui) / ui_x8;
+ timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+ temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8);
+ tmin = max_t(s32, temp, 0);
+ temp = (85 * coeff + 6 * ui) / ui_x8;
+ tmax = max_t(s32, temp, 0);
+ timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
+
+ temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui;
+ tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = 255;
+ timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
+
+ tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1;
+ temp = 105 * coeff + 12 * ui - 20 * coeff;
+ tmax = (temp / ui_x8) - 1;
+ timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+ temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
+ timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
+
+ tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
+ tmax = 255;
+ timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
+
+ temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
+ timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
+
+ temp = 60 * coeff + 52 * ui - 43 * ui;
+ tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = 63;
+ timing->shared_timings.clk_post =
+ linear_inter(tmax, tmin, pcnt2, 0, false);
+
+ temp = 8 * ui + (timing->clk_prepare << 3) * ui;
+ temp += (((timing->clk_zero + 3) << 3) + 11) * ui;
+ temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
+ (((timing->hs_rqst_ckln << 3) + 8) * ui);
+ tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = 63;
+ if (tmin > tmax) {
+ temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
+ timing->shared_timings.clk_pre = temp >> 1;
+ timing->shared_timings.clk_pre_inc_by_2 = 1;
+ } else {
+ timing->shared_timings.clk_pre =
+ linear_inter(tmax, tmin, pcnt2, 0, false);
+ timing->shared_timings.clk_pre_inc_by_2 = 0;
+ }
+
+ timing->ta_go = 3;
+ timing->ta_sure = 0;
+ timing->ta_get = 4;
+
+ DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
+ timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
+ timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
+ timing->clk_trail, timing->clk_prepare, timing->hs_exit,
+ timing->hs_zero, timing->hs_prepare, timing->hs_trail,
+ timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
+ timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
+ timing->hs_prep_dly_ckln);
+
+ return 0;
+}
+
void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
u32 bit_mask)
{
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index c56268c..a24ab80 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -101,6 +101,8 @@ int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
struct msm_dsi_phy_clk_request *clk_req);
int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,
struct msm_dsi_phy_clk_request *clk_req);
+int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
+ struct msm_dsi_phy_clk_request *clk_req);
void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
u32 bit_mask);
int msm_dsi_phy_init_common(struct msm_dsi_phy *phy);
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
index 0af951a..b3fffc8 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
@@ -79,34 +79,6 @@ static void dsi_phy_hw_v3_0_lane_settings(struct msm_dsi_phy *phy)
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_TX_DCTRL(3), 0x04);
}
-static int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
- struct msm_dsi_phy_clk_request *clk_req)
-{
- /*
- * TODO: These params need to be computed, they're currently hardcoded
- * for a 1440x2560@60Hz panel with a byteclk of 100.618 Mhz, and a
- * default escape clock of 19.2 Mhz.
- */
-
- timing->hs_halfbyte_en = 0;
- timing->clk_zero = 0x1c;
- timing->clk_prepare = 0x07;
- timing->clk_trail = 0x07;
- timing->hs_exit = 0x23;
- timing->hs_zero = 0x21;
- timing->hs_prepare = 0x07;
- timing->hs_trail = 0x07;
- timing->hs_rqst = 0x05;
- timing->ta_sure = 0x00;
- timing->ta_go = 0x03;
- timing->ta_get = 0x04;
-
- timing->shared_timings.clk_pre = 0x2d;
- timing->shared_timings.clk_post = 0x0d;
-
- return 0;
-}
-
static int dsi_10nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
struct msm_dsi_phy_clk_request *clk_req)
{
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
