[PATCH v2 0/3] Update reset and poll logic for GDSCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 [v2]
  * Addressed review comments given in v1 series

This series implements the below logic for the GDSCs

 1. logic to reset the AON logic before or assert/deassert the block
   control reset removing the clamp io for few GDSCs on SDM845 SoC.
 2. It also introduces the requirement to poll for higher timeout values
   for few of the GDSCs.
 3. There is a new poll register for the GDSCs on SDM845 SoCs which needs
   to be polled for the correct hardware status of the GDSCs.

Amit Nischal (3):
  clk: qcom: gdsc: Add support to reset AON and block reset logic
  clk: qcom: gdsc: Add support to poll for higher timeout value
  clk: qcom: gdsc: Add support to poll CFG register to check GDSC state

 drivers/clk/qcom/gdsc.c | 63 +++++++++++++++++++++++++++++++++++++++++++------
 drivers/clk/qcom/gdsc.h |  5 +++-
 2 files changed, 60 insertions(+), 8 deletions(-)

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux