From: Mahesh Sivasubramanian <msivasub@xxxxxxxxxxxxxx>
Command DB provides information on shared resources like clocks,
regulators etc., probed at boot by the remote subsytem and made
available in shared memory.
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Mahesh Sivasubramanian <msivasub@xxxxxxxxxxxxxx>
Signed-off-by: Lina Iyer <ilina@xxxxxxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
Changes in v7:
- Fix description of 'reg' property
Changes in v6:
- Move to bindings/reserved-memory
- Remove indirection address and use only the actual reserved
memory
Changes in v4:
- Fix unwanted capitalization
- Add reg property
---
.../bindings/reserved-memory/qcom,cmd-db.txt | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt
diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt
new file mode 100644
index 000000000000..1390cd3a7f0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt
@@ -0,0 +1,36 @@
+Command DB
+---------
+
+Command DB is a database that provides a mapping between resource key and the
+resource address for a system resource managed by a remote processor. The data
+is stored in a shared memory region and is loaded by the remote processor.
+
+Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for
+controlling shared resources. Depending on the board configuration the shared
+resource properties may change. These properties are dynamically probed by the
+remote processor and made available in the shared memory.
+
+The bindings for Command DB is specified in the reserved-memory section in
+devicetree. The devicetree representation of the command DB driver should be:
+
+Properties:
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: Should be "qcom,cmd-db"
+
+- reg:
+ Usage: required
+ Value type: <prop encoded array>
+ Definition: The register address that points to the actual location of
+ the Command DB in memory.
+
+Example:
+
+ reserved-memory {
+ [...]
+ qcom,cmd-db@85fe0000 {
+ reg = <0x0 0x85fe0000 0x0 0x20000>;
+ compatible = "qcom,cmd-db";
+ };
+ };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
