From: Rupesh Tatiya <rtatiya@xxxxxxxxxxxxxx>
Add support to set voltage/current of various regulators to power up/down
BT QCA chips attached to MSM.
Change-Id: I3600dd7bc97c753bc9cf7f8ac39d7b90bc21c67d
Signed-off-by: Rupesh Tatiya <rtatiya@xxxxxxxxxxxxxx>
---
drivers/bluetooth/Makefile | 5 +-
drivers/bluetooth/btqca_power.c | 177 ++++++++++++++++++++++++++++++++++++++++
drivers/bluetooth/btqca_power.h | 71 ++++++++++++++++
3 files changed, 251 insertions(+), 2 deletions(-)
create mode 100644 drivers/bluetooth/btqca_power.c
create mode 100644 drivers/bluetooth/btqca_power.h
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 4e4e44d..f963909 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -24,8 +24,9 @@ obj-$(CONFIG_BT_WILINK) += btwilink.o
obj-$(CONFIG_BT_QCOMSMD) += btqcomsmd.o
obj-$(CONFIG_BT_BCM) += btbcm.o
obj-$(CONFIG_BT_RTL) += btrtl.o
-obj-$(CONFIG_BT_QCA) += btqca.o
-
+obj-$(CONFIG_BT_QCA) += btqca_uart.o
+btqca_uart-$(CONFIG_BT_QCA) += btqca.o
+btqca_uart-$(CONFIG_BT_QCA) += btqca_power.o
obj-$(CONFIG_BT_HCIUART_NOKIA) += hci_nokia.o
btmrvl-y := btmrvl_main.o
diff --git a/drivers/bluetooth/btqca_power.c b/drivers/bluetooth/btqca_power.c
new file mode 100644
index 0000000..a189ff1
--- /dev/null
+++ b/drivers/bluetooth/btqca_power.c
@@ -0,0 +1,177 @@
+/* Copyright (c) 2009-2010, 2013-2018 The Linux Foundation.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/*
+ * Bluetooth Power Switch Module
+ * controls power to external Bluetooth device
+ * with interface to power management device
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_device.h>
+#include <net/bluetooth/bluetooth.h>
+
+#include "btqca_power.h"
+
+static struct btqca_power *qca;
+
+static const struct btqca_vreg_data cherokee_data = {
+ .soc_type = BTQCA_CHEROKEE,
+ .vregs = (struct btqca_vreg []) {
+ { "vddio", 1352000, 1352000, 0 },
+ { "vddxtal", 1904000, 2040000, 0 },
+ { "vddcore", 1800000, 1800000, 1 },
+ { "vddpa", 130400, 1304000, 1 },
+ { "vddldo", 3000000, 3312000, 1 },
+ { "vddpwd", 3312000, 3600000, 0 },
+ },
+ .num_vregs = 6,
+};
+
+static const struct of_device_id btqca_power_match_table[] = {
+ { .compatible = "qca,wcn3990", .data = &cherokee_data},
+ {}
+};
+
+int btqca_get_soc_type(enum btqca_soc_t *type)
+{
+ if (!qca || !qca->vreg_data)
+ return -EINVAL;
+
+ *type = qca->vreg_data->soc_type;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btqca_get_soc_type);
+
+int btqca_power_setup(int on)
+{
+ int ret = 0;
+ int i;
+ struct btqca_vreg *vregs;
+
+ if (!qca || !qca->vreg_data || !qca->vreg_bulk)
+ return -EINVAL;
+ vregs = qca->vreg_data->vregs;
+
+ BT_DBG("on: %d", on);
+
+ if (on) {
+ for (i = 0; i < qca->vreg_data->num_vregs; i++) {
+ regulator_set_voltage(qca->vreg_bulk[i].consumer,
+ vregs[i].min_v,
+ vregs[i].max_v);
+
+ if (vregs[i].load_ua)
+ regulator_set_load(qca->vreg_bulk[i].consumer,
+ vregs[i].load_ua);
+
+ regulator_enable(qca->vreg_bulk[i].consumer);
+ }
+ } else {
+ for (i = 0; i < qca->vreg_data->num_vregs; i++) {
+ regulator_disable(qca->vreg_bulk[i].consumer);
+
+ regulator_set_voltage(qca->vreg_bulk[i].consumer,
+ 0, vregs[i].max_v);
+
+ regulator_set_load(qca->vreg_bulk[i].consumer, 0);
+ }
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(btqca_power_setup);
+
+static int init_regulators(struct btqca_power *qca,
+ const struct btqca_vreg *vregs,
+ size_t num_vregs)
+{
+ int i, ret;
+
+ qca->vreg_bulk = devm_kzalloc(qca->dev, num_vregs *
+ sizeof(struct regulator_bulk_data),
+ GFP_KERNEL);
+ if (!qca->vreg_bulk)
+ return -ENOMEM;
+
+ for (i = 0; i < num_vregs; i++)
+ qca->vreg_bulk[i].supply = vregs[i].name;
+
+ return devm_regulator_bulk_get(qca->dev, num_vregs, qca->vreg_bulk);
+}
+
+static int btqca_power_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ const struct btqca_vreg_data *data;
+
+ BT_DBG("");
+
+ qca = kzalloc(sizeof(struct btqca_power), GFP_KERNEL);
+ if (!qca)
+ return -ENOMEM;
+ qca->pdev = pdev;
+ qca->dev = &pdev->dev;
+
+ data = of_device_get_match_data(&pdev->dev);
+ qca->vreg_data = data;
+ ret = init_regulators(qca, data->vregs, data->num_vregs);
+ if (ret)
+ goto out;
+
+ return 0;
+
+out:
+ kfree(qca);
+ return ret;
+}
+
+static int btqca_power_remove(struct platform_device *pdev)
+{
+ BT_DBG("");
+
+ btqca_power_setup(0);
+ kfree(qca);
+
+ return 0;
+}
+
+static struct platform_driver btqca_power_driver = {
+ .probe = btqca_power_probe,
+ .remove = btqca_power_remove,
+ .driver = {
+ .name = "btqca_power",
+ .owner = THIS_MODULE,
+ .of_match_table = btqca_power_match_table,
+ },
+};
+
+static int __init btqca_power_init(void)
+{
+ return platform_driver_register(&btqca_power_driver);
+}
+
+static void __exit btqca_power_exit(void)
+{
+ platform_driver_unregister(&btqca_power_driver);
+}
+
+module_init(btqca_power_init);
+module_exit(btqca_power_exit);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MSM Bluetooth power control driver for Atheros family");
diff --git a/drivers/bluetooth/btqca_power.h b/drivers/bluetooth/btqca_power.h
new file mode 100644
index 0000000..0569760
--- /dev/null
+++ b/drivers/bluetooth/btqca_power.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (c) 2013-2018 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __BTQCA_POWER_H
+#define __BTQCA_POWER_H
+
+enum btqca_soc_t {
+ BTQCA_INVALID = -1,
+ BTQCA_AR3002,
+ BTQCA_ROME,
+ BTQCA_CHEROKEE
+};
+
+/*
+ * voltage regulator information required for configuring the
+ * QCA bluetooth chipset
+ */
+struct btqca_vreg {
+ const char *name;
+ unsigned int min_v;
+ unsigned int max_v;
+ unsigned int load_ua;
+};
+
+struct btqca_vreg_data {
+ enum btqca_soc_t soc_type;
+ struct btqca_vreg *vregs;
+ size_t num_vregs;
+};
+
+/*
+ * Platform data for the QCA bluetooth power driver.
+ */
+struct btqca_power {
+ struct platform_device *pdev;
+ struct device *dev;
+ struct btqca_vreg_data *vreg_data;
+ struct regulator_bulk_data *vreg_bulk;
+};
+
+#if IS_ENABLED(CONFIG_BT_QCA)
+
+int btqca_power_setup(int on);
+int btqca_get_soc_type(enum btqca_soc_t *type);
+
+#else
+
+static inline int btqca_power_setup(int on)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline int btqca_get_soc_type(enum btqca_soc_t *type)
+{
+ return -EOPNOTSUPP;
+}
+
+#endif
+
+#endif /* __BTQCA_POWER_H */
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
