[PATCH v6 0/2] drivers/qcom: add Command DB support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Changes since v5:
	- Remove indirection of command db start address
	- Rebase on top of 4.16

Changes since v4:
        - Address comments from Stephen and Bjorn

These patches add support for reading a shared memory database in the newer
QCOM SoCs called Command DB. With the new architecture on SDM845, shared
resources like clocks, regulators etc., have dynamic properties. These
properties may change based on external components, board configurations or
available feature set. A remote processor detects these parameters and fills up
the database with the resource and available state information. Platform
drivers that need these shared resources will need to query this database to
get the address and properties and vote for the state.

The information in the database is static.  The database is read-only memory
location that is available for Linux. A pre-defined string is used as a key into
an entry in the database. Generally, platform drivers query the database only
at init to get the information they need.

[v1]: https://www.spinics.net/lists/linux-arm-msm/msg32462.html
[v2]: https://lkml.org/lkml/2018/2/8/588
[v3]: https://lkml.org/lkml/2018/2/16/842
[v4]: https://patchwork.kernel.org/patch/10242935/
[v5]: https://lkml.org/lkml/2018/3/14/787

Lina Iyer (2):
  drivers: qcom: add command DB driver
  dt-bindings: introduce Command DB for QCOM SoCs

 .../bindings/reserved-memory/qcom,cmd-db.txt       |  37 +++
 drivers/of/platform.c                              |   1 +
 drivers/soc/qcom/Kconfig                           |   9 +
 drivers/soc/qcom/Makefile                          |   1 +
 drivers/soc/qcom/cmd-db.c                          | 310 +++++++++++++++++++++
 include/soc/qcom/cmd-db.h                          |  45 +++
 6 files changed, 403 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt
 create mode 100644 drivers/soc/qcom/cmd-db.c
 create mode 100644 include/soc/qcom/cmd-db.h

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux