[PATCH v2 1/4] i2c: qup: add probe path for Centriq ACPI devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for Qualcomm Centriq devices that are qup-v2 compatible but
do not support DMA, so nodma needs to be set.

Signed-off-by: Austin Christ <austinwc@xxxxxxxxxxxxxx>
---
v1:
	- Initial
v2:
	- Remove whitespace error
---
 drivers/i2c/busses/i2c-qup.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 904dfec..80af973 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -1648,6 +1648,14 @@ static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup)
 	clk_disable_unprepare(qup->pclk);
 }
 
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id qup_i2c_acpi_match[] = {
+	{ "QCOM8010"},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, qup_i2c_acpi_match);
+#endif
+
 static int qup_i2c_probe(struct platform_device *pdev)
 {
 	static const int blk_sizes[] = {4, 16, 32};
@@ -1675,6 +1683,12 @@ static int qup_i2c_probe(struct platform_device *pdev)
 			DEFAULT_CLK_FREQ);
 	}
 
+	if (acpi_match_device(qup_i2c_acpi_match, qup->dev)) {
+		qup->adap.algo = &qup_i2c_algo_v2;
+		is_qup_v1 = false;
+		goto nodma;
+	}
+
 	if (of_device_is_compatible(pdev->dev.of_node, "qcom,i2c-qup-v1.1.1")) {
 		qup->adap.algo = &qup_i2c_algo;
 		qup->adap.quirks = &qup_i2c_quirks;
@@ -1959,14 +1973,6 @@ static int qup_i2c_resume(struct device *device)
 };
 MODULE_DEVICE_TABLE(of, qup_i2c_dt_match);
 
-#if IS_ENABLED(CONFIG_ACPI)
-static const struct acpi_device_id qup_i2c_acpi_match[] = {
-	{ "QCOM8010"},
-	{ },
-};
-MODULE_DEVICE_TABLE(acpi, qup_i2c_acpi_match);
-#endif
-
 static struct platform_driver qup_i2c_driver = {
 	.probe  = qup_i2c_probe,
 	.remove = qup_i2c_remove,
-- 
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux